New to the Site, and new truck. Pics - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DragRag · 08-24-2009, 01:47 AM

Just joined, glad I found a good forum for these trucks. This truck was purchased new by my great grandfather in 69'. My son when I am done restoring it will be the proud owner of this soon to be 5 generation owned 1969 Chevrolet. Grand Pa Bruces's great great grandson will be rolling in this thing someday, he does have a few years to go being 7 now, but I will let him cruise it on the farm for sure before then.

It is a very low option 69', it came with a 307 when new, and three on the tree. It has a 350 in it now, and turbo 350. I plan on taking the shifter off the floor where it is now, and putting it on the column. I want the stock look. It will be a frame off resto I believe, and I plan on keeping it as a long bed 1/2 ton. No major changes happening besides a color change. It is sporting the original paint, and not to much rust being an original California truck. The truck according to my uncle has 500-600k miles on it, and is on it's 3rd engine. Granda Pa Bruce who bought it new wore out the column shift and my uncle and dad put a 3 on the floor shifter on it for him. He wore that out, and they put in another. My Grand Father when he got it, put the turbo 350 in it, and new floor shifter for that. My uncle Greg pulled the trans later on it, rebuilt it, and then put a 300 horse 350 engine in it, and that is what it has today(low Mileage). I will be putting it back to a column shift, but it will stay an auto trans for sure. The wife will not drive a 3 on the tree, and the clutch linkage etc is long gone!

We have it in the garage now, took out the interior already. Bed, fenders, doors, and hood coming off this week. We are not wasting time on it. Not sure how long till we have our frame off done on this, but it will look like it did when it rolled from Fremont so many years ago. Slightly different, but close enough to stock that not many will notice the differences. This truck did only come with three options from the factory, heavy rear springs, front stabilizer bar, and amp/oil gauges. Power steering was added about 20 years ago. It will be two tone pale yellow, and white when done. Probably will change the interior color from blue to black to. I am happy to have gotten this family truck. I'll be honest, this is my first Chevy truck, I have been driving American since birth, but this is my first Bowtie truck, or anything for that matter. I have always loved this body style, and thought I someday would have a short bed 4x4 one of these, not a long bed 2 wheel drive. I am more happy with this one being from my grand pappy!

That is my son in the pic, the future generation 5 owner of this truck. I wonder how many trucks out there have been handed down that many times? Probably only a few of them for sure. When it is done, I think I might call GM and tell them our story.

http://

http://

OARNGESI · 08-24-2009, 03:20 AM

Welcome really nice truck with really cool story be sure to post pics as it comes along

petey-pablo · 08-24-2009, 03:25 AM

Welcome from fremont ca

70LonghornCST · 08-24-2009, 03:38 AM

Welcome! Nice, solid truck. I grew up in the Santa Cruz/Watsonville area. I miss that area.

**GR8-68** · 08-24-2009, 04:37 AM

welcome and that looks like a wonderful start to a project, what kind of wheels is on there? looks like widened steel wheels

**special-K** · 08-24-2009, 08:07 AM

Welcome to the site.That`s a great story.You`ll find there are quite a few heirloom trucks here.Welcome to the heirloom club.

Tim_A · 08-24-2009, 08:23 AM

Welcome! Great truck.

big_al_71 · 08-24-2009, 08:37 AM

Welcome aboard and you will definetly enjoy the ride in here....Great story and I am hoping to do the same with mine by passing it on to my youngest then go from there..

BossHogg69 · 08-24-2009, 11:10 AM

Welcome to the board and the heirloom club. My '69 was passed from my grandfather to my father and now to me.

72BlckButy · 08-24-2009, 11:19 AM

to the board from Mid-MO!!!

Great looking project!

DragRag · 08-24-2009, 12:23 PM

Quote:

Originally Posted by GR8-68

welcome and that looks like a wonderful start to a project, what kind of wheels is on there? looks like widened steel wheels

The wheels are rally wheels. They are painted white though instead of silver, my uncle painted them and put them on it when he got it. They are coming off though, and stock steel wheels and center caps are going on it, when I find them that is. Quick question to. Why is our truck a 6 lug, and a I see some of them are only 5 lug? Just a thought, thanks for the warm welcome. We will be here looking for info regularly for the resto I am sure.

tcb-1 · 08-24-2009, 01:01 PM

the 67-70 1/2 ton rigs such as yours were all 6 lug. GM changed to the 5 on 5 bolt circle starting with with the 71 1/2 ton trucks.

welcome to the board from Shawnee, KS!!

DragRag · 08-24-2009, 01:03 PM

Thanks for clearing that up for me.

Ole Blue 68 · 08-24-2009, 01:22 PM

Welcome from Philly

unclewatts · 08-24-2009, 08:56 PM

Welcome to the board from Lake County. Glad to hear that you plan to restore it to original condition. God bless the Fremont GM assembly plant!

**kev2809** · 08-24-2009, 09:45 PM

welcome from Texas, looks like you got a good truck to start off with.

BAGNDRAGIT · 08-24-2009, 11:01 PM

Welcome from Phoenix, thats a great truck you have there, and some good help haha.

cant wait to see what you do with it!!!

08-24-2009, 01:47 AM	#1
DragRag Registered User Join Date: Aug 2009 Location: Good old US of A! Posts: 26	New to the Site, and new truck. Pics Just joined, glad I found a good forum for these trucks. This truck was purchased new by my great grandfather in 69'. My son when I am done restoring it will be the proud owner of this soon to be 5 generation owned 1969 Chevrolet. Grand Pa Bruces's great great grandson will be rolling in this thing someday, he does have a few years to go being 7 now, but I will let him cruise it on the farm for sure before then. It is a very low option 69', it came with a 307 when new, and three on the tree. It has a 350 in it now, and turbo 350. I plan on taking the shifter off the floor where it is now, and putting it on the column. I want the stock look. It will be a frame off resto I believe, and I plan on keeping it as a long bed 1/2 ton. No major changes happening besides a color change. It is sporting the original paint, and not to much rust being an original California truck. The truck according to my uncle has 500-600k miles on it, and is on it's 3rd engine. Granda Pa Bruce who bought it new wore out the column shift and my uncle and dad put a 3 on the floor shifter on it for him. He wore that out, and they put in another. My Grand Father when he got it, put the turbo 350 in it, and new floor shifter for that. My uncle Greg pulled the trans later on it, rebuilt it, and then put a 300 horse 350 engine in it, and that is what it has today(low Mileage). I will be putting it back to a column shift, but it will stay an auto trans for sure. The wife will not drive a 3 on the tree, and the clutch linkage etc is long gone! We have it in the garage now, took out the interior already. Bed, fenders, doors, and hood coming off this week. We are not wasting time on it. Not sure how long till we have our frame off done on this, but it will look like it did when it rolled from Fremont so many years ago. Slightly different, but close enough to stock that not many will notice the differences. This truck did only come with three options from the factory, heavy rear springs, front stabilizer bar, and amp/oil gauges. Power steering was added about 20 years ago. It will be two tone pale yellow, and white when done. Probably will change the interior color from blue to black to. I am happy to have gotten this family truck. I'll be honest, this is my first Chevy truck, I have been driving American since birth, but this is my first Bowtie truck, or anything for that matter. I have always loved this body style, and thought I someday would have a short bed 4x4 one of these, not a long bed 2 wheel drive. I am more happy with this one being from my grand pappy! That is my son in the pic, the future generation 5 owner of this truck. I wonder how many trucks out there have been handed down that many times? Probably only a few of them for sure. When it is done, I think I might call GM and tell them our story. http:// http:// Last edited by DragRag; 08-24-2009 at 01:57 AM.

08-24-2009, 03:20 AM	#2
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: New to the Site, and new truck. Pics Welcome really nice truck with really cool story be sure to post pics as it comes along __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

08-24-2009, 03:25 AM	#3
petey-pablo "THE GREEN GOBLIN" Join Date: Mar 2008 Location: Fremont Ca. Posts: 1,025	Re: New to the Site, and new truck. Pics Welcome from fremont ca __________________ Petey-pablo "THE GREEN GOBLIN" 1972 Cheyenne 10 Short Fleet Side Front 2.5inch Spindles with 2inch Springs Rear 4inch drop Springs. 454BBC TH400,Posi 1971 Cheyenne 10 Long Fleet Side 454BBC TH350,Posi Sold Drive it like you stole it! Petey-pablo@sbcglobal.net

08-24-2009, 03:38 AM	#4
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: New to the Site, and new truck. Pics Welcome! Nice, solid truck. I grew up in the Santa Cruz/Watsonville area. I miss that area. __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

08-24-2009, 04:37 AM	#5
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: New to the Site, and new truck. Pics welcome and that looks like a wonderful start to a project, what kind of wheels is on there? looks like widened steel wheels

08-24-2009, 08:07 AM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: New to the Site, and new truck. Pics Welcome to the site.That`s a great story.You`ll find there are quite a few heirloom trucks here.Welcome to the heirloom club. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-24-2009, 08:23 AM	#7
Tim_A Registered User Join Date: Aug 2009 Location: Naples, FL Posts: 62	Re: New to the Site, and new truck. Pics Welcome! Great truck. __________________ '67 Impala '69 Chevy 350 C-10 shortstep

08-24-2009, 08:37 AM	#8
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: New to the Site, and new truck. Pics Welcome aboard and you will definetly enjoy the ride in here....Great story and I am hoping to do the same with mine by passing it on to my youngest then go from there.. __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

08-24-2009, 11:10 AM	#9
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: New to the Site, and new truck. Pics Welcome to the board and the heirloom club. My '69 was passed from my grandfather to my father and now to me. __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

08-24-2009, 11:19 AM	#10
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: New to the Site, and new truck. Pics to the board from Mid-MO!!! Great looking project! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

08-24-2009, 01:01 PM	#12
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	Re: New to the Site, and new truck. Pics the 67-70 1/2 ton rigs such as yours were all 6 lug. GM changed to the 5 on 5 bolt circle starting with with the 71 1/2 ton trucks. welcome to the board from Shawnee, KS!! __________________ Doug THANK YOU to our American Soldiers & Veterans - POW MIA "You will NEVER be forgotten". The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson

08-24-2009, 01:03 PM	#13
DragRag Registered User Join Date: Aug 2009 Location: Good old US of A! Posts: 26	Re: New to the Site, and new truck. Pics Thanks for clearing that up for me.

08-24-2009, 01:22 PM	#14
Ole Blue 68 Registered User Join Date: Aug 2005 Location: Philly Posts: 1,140	Re: New to the Site, and new truck. Pics Welcome from Philly

08-24-2009, 08:56 PM	#15
unclewatts 70 Chevrolet=Obsession Join Date: Jun 2009 Location: nice ca Posts: 1,067	Re: New to the Site, and new truck. Pics Welcome to the board from Lake County. Glad to hear that you plan to restore it to original condition. God bless the Fremont GM assembly plant! __________________ I'm Just like my truck. Old, Ugly and Grouchy. Except my truck starts easily in the morning and doesn't smoke! IT'S NOT EASY BEING GREEN! -Kermit the frog 1970 Chevrolet C-10 Longbed Stepside : 350, Muncie M20, 3.08 GM corp. positraction Forest green exterior/light green interior(Where all my money goes) 1996 Toyota Corolla (Parts runner)

08-24-2009, 09:45 PM	#16
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: New to the Site, and new truck. Pics welcome from Texas, looks like you got a good truck to start off with. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]



Register or Log In To remove these advertisements.

08-24-2009, 11:01 PM	#17
BAGNDRAGIT Just Not Low Enough! Join Date: Mar 2009 Location: Phoenix, AZ Posts: 525	Re: New to the Site, and new truck. Pics Welcome from Phoenix, thats a great truck you have there, and some good help haha. cant wait to see what you do with it!!! __________________ NEED ELECTRICAL HELP? ASK ME! 67-72 Full Wiring Diagrams Lots Of Info, TAKE A LOOK 1967 Chevy C-10 Shortbox Bagged 327 4spd Previous: 1971 Chevy C-10 Short Sep I6 Auto (Traded) 1973 Chevy C-20 THE REDNECK BATTLE TRUCK 2001 Chevy Silverado 2Dr 5.3L Shortbox. R.I.P. 1969 Volkswagen Bug This is my first meeting, I have a horsepower problem.

Register or Log In To remove these advertisements.