Project NOT4SLE - The 1947 - Present Chevrolet & GMC Truck Message Board Network

my67chevytruck · 08-25-2009, 07:48 AM

I think i would go with a 1" or 2" phenolic carb spacer and that should get you above the AC bracket. I would go this route before bending the carb fuel line.

what oil filler problem you referring too?

*vegaschevy* · 08-25-2009, 01:10 PM

Quote:

Originally Posted by my67chevytruck

I think i would go with a 1" or 2" phenolic carb spacer and that should get you above the AC bracket. I would go this route before bending the carb fuel line.

what oil filler problem you referring too?

I want to get rid of the stovepipe filler on the truck and go with something low profile since i am changing out the intake. I found a couple plugs and grommets but nothing fits snug

*vegaschevy* · 08-26-2009, 09:41 PM

I purchased a carb spacer plate today along with a skip white distributor. I figured I see no sense in timing the oem original distributor on this truck to get it running.
If I am going to patch this motor till OI build a new one I figured I might as well try to help it run better till then. I also ordered a set of 90* spark plug wires, a crimping tool and a dress up kit to continue putting lipstick on a pig.

Ill have pics hopefully on friday for you.

*vegaschevy* · 09-19-2009, 01:35 AM

my buddy picked up a 67-68 cowl hood for this truck in Ca today. So all I need is some small stuff to complete the swap lol

*vegaschevy* · 09-24-2009, 05:28 PM

A few pics of working on it a couple weeks ago since my last pics. Today when I get home I am going ot finish the fuel line and get the rad installed.

08-25-2009, 07:48 AM	#1
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Project NOT4SLE I think i would go with a 1" or 2" phenolic carb spacer and that should get you above the AC bracket. I would go this route before bending the carb fuel line. what oil filler problem you referring too? __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470 Last edited by my67chevytruck; 08-25-2009 at 07:54 AM.

08-26-2009, 09:41 PM	#3
vegaschevy Account Suspended Join Date: May 2009 Location: las vegas nv Posts: 1,493	Re: Project NOT4SLE I purchased a carb spacer plate today along with a skip white distributor. I figured I see no sense in timing the oem original distributor on this truck to get it running. If I am going to patch this motor till OI build a new one I figured I might as well try to help it run better till then. I also ordered a set of 90* spark plug wires, a crimping tool and a dress up kit to continue putting lipstick on a pig. Ill have pics hopefully on friday for you.

09-19-2009, 01:35 AM	#4
vegaschevy Account Suspended Join Date: May 2009 Location: las vegas nv Posts: 1,493	Re: Project NOT4SLE my buddy picked up a 67-68 cowl hood for this truck in Ca today. So all I need is some small stuff to complete the swap lol

09-24-2009, 05:28 PM	#5
vegaschevy Account Suspended Join Date: May 2009 Location: las vegas nv Posts: 1,493	Re: Project NOT4SLE A few pics of working on it a couple weeks ago since my last pics. Today when I get home I am going ot finish the fuel line and get the rad installed.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.