how do i get the ignition tumbler out??!!!??! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

oldblue1968chevy · 08-23-2009, 02:34 PM

HOW DO I GET THE IGNITION TUMBLER OUT OF MY 68C10?

I spun the bezel left 10000000 times and still nothing..its just loose now..what am i doing wrong or missing thanks!

glock35ipsc · 08-23-2009, 02:40 PM

Tighten it back up if you can. There should be a small hole next to the key slot. Put the key in, and insert a paper clip in that little hole. Turn the key (can't remember which way, try both) and it should turn then pull out.

oldblue1968chevy · 08-23-2009, 02:41 PM

crap!

old dad thought it turned out like a nut...

so THATS what that lil hole is for..hmm

THANKS!!!!!!

glock35ipsc · 08-23-2009, 03:05 PM

One the tumbler is out, the bezel will spin right off then.

oldblue1968chevy · 08-23-2009, 03:25 PM

Well i got it out and back in took awhile

BUT I CAN STILL START MY TRUCK WITH A SCREWDRIVER ANY OTHER KEY ETC WTF IM MAD LOL I BOUGHT 23$ KIT THAT DIDNT FIX M PROBLEM??!!

what'd i do wrong?

cparman · 08-23-2009, 03:27 PM

once you get the bezel tight, put key in, paper clip in hand, turn key to accessory put the paper clip, and turn it a bit more to the left, while pulling out on the lock cyl

oldblue1968chevy · 08-23-2009, 03:36 PM

ok i can pull the key out while drivin down the road etc and i can still start it with a screwdriver etc..why is this? this is the whole reason i replaced this so my mexican buddy doesnt move my truck while im in school!! lol

lovnthe70 · 08-23-2009, 05:37 PM

same thing with my truck, it is handy though after you start your truck but then have to run back inside for something cause you dont have to turn it off to get your house key! ill be watching to see if anyone has a solution, ive been meaning to do something about this before my truck gets stolen!

Longhorn Man · 08-23-2009, 06:34 PM

what part did you replace? The ignition, or the tumbler?
(it has a worn tumbler)

oldblue1968chevy · 08-23-2009, 07:58 PM

the thing were the key goes in...i think the tumbler.....if you force it you can still start it with another key (my old one)

*vegaschevy* · 08-24-2009, 01:14 AM

Quote:

Originally Posted by glock35ipsc

Tighten it back up if you can. There should be a small hole next to the key slot. Put the key in, and insert a paper clip in that little hole. Turn the key (can't remember which way, try both) and it should turn then pull out.

what if you do not have a key?

mas09ts · 08-24-2009, 01:56 AM

Quote:

Originally Posted by oldblue1968chevy

ok i can pull the key out while drivin down the road etc and i can still start it with a screwdriver etc..why is this? this is the whole reason i replaced this so my mexican buddy doesnt move my truck while im in school!! lol

Yeah mine does the same thing idk why, maybe someone here might have an answer.

70LonghornCST · 08-24-2009, 03:42 AM

inquiring minds want to know...

**GR8-68** · 08-24-2009, 04:32 AM

Quote:

Originally Posted by vegaschevy

what if you do not have a key?

X2

tecky11 · 08-24-2009, 04:41 AM

that is a good question, in my 72 i have the sameproblem. the door key you have to use the real key, but the iginitions anythin works as long as it fits in the hole. any ideas? inquiring minds wnat to know!

glock35ipsc · 08-24-2009, 09:12 AM

Well, if 'anything' will fit in the hole and turn it, then that's what you would use to get it out. If you don't have a key and nothing else will turn it, then I don't know. PM LocDoc, he'd probably know.

*2tons of fun* · 08-24-2009, 09:44 AM

my short fleet had the same anything will start it prob, i would for get to get my keys out of my pocket so i would just use my knife.

now im on the other end of the problem, i bought a truck and the guy lost the key, i told him dont worry they will usualy roll over with another key or knife. no dice, the thing is tight as a drum :laughing:

smoky02 · 08-24-2009, 10:46 AM

I ordered a new ignition and tumbler from ECE and my truck will only start with that key

**kev2809** · 08-24-2009, 11:01 AM

good luck 2 tons of fun, i thought the same thing when i bought my suburban, and i had hell getting everything out without the key. ended up stripping my little ign. bezel and bent the hole in the dash a little...nothing i cant fix but it still was a pita

Ont67shortbox · 08-24-2009, 02:11 PM

I bought a new cylinder and keys from Napa,it was $23 dollars,solved the problem.

**mr48chev** · 08-24-2009, 02:39 PM

Quote:

Originally Posted by vegaschevy

what if you do not have a key?

Usually you can find an old worn GM key that will turn the tumbler on these trucks. I never throw an old key away as it has saved my bacon more than once over the years.

I think LocDoc said in another thread that the passenger door key should be the same as the original ignition key if the tumble hasn't been replaced. In that case you can pull the lock out of the passenger door and take it to a locksmith and have new keys made.

Longhorn Man · 08-24-2009, 04:27 PM

if that doesn't work, then it is time to get the hammer and a big pinch out.

**LockDoc** · 08-24-2009, 10:43 PM

-
As far as getting the ignition tumbler out read this post...

http://67-72chevytrucks.com/vboard/s...d.php?t=358919

If your new lock cylinder is made overseas it may not have any tumblers in it. Thats why anything will turn it. On the original lock cylinders it would either be that the tumblers are stuck, bent, worn out, or someone may have removed them. The tumblers are what keeps the lock cylinder from turning unless the key is inserted.

LockDoc

BAGNDRAGIT · 08-24-2009, 11:14 PM

i just replaced the whole thing, that solved all my issues....

KEL · 08-25-2009, 08:21 AM

I bought the matching door locks and ignition from GMC Paul's.
One key works all.
I'm happy with it.

08-23-2009, 02:34 PM	#1
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	how do i get the ignition tumbler out??!!!??! HOW DO I GET THE IGNITION TUMBLER OUT OF MY 68C10? I spun the bezel left 10000000 times and still nothing..its just loose now..what am i doing wrong or missing thanks! __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

08-23-2009, 02:40 PM	#2
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,685	Re: how do i get the ignition tumbler out??!!!??! Tighten it back up if you can. There should be a small hole next to the key slot. Put the key in, and insert a paper clip in that little hole. Turn the key (can't remember which way, try both) and it should turn then pull out. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

08-23-2009, 02:41 PM	#3
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: how do i get the ignition tumbler out??!!!??! crap! old dad thought it turned out like a nut... so THATS what that lil hole is for..hmm THANKS!!!!!! __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

08-23-2009, 03:05 PM	#4
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,685	Re: how do i get the ignition tumbler out??!!!??! One the tumbler is out, the bezel will spin right off then. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

08-23-2009, 03:25 PM	#5
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: how do i get the ignition tumbler out??!!!??! Well i got it out and back in took awhile BUT I CAN STILL START MY TRUCK WITH A SCREWDRIVER ANY OTHER KEY ETC WTF IM MAD LOL I BOUGHT 23$ KIT THAT DIDNT FIX M PROBLEM??!! what'd i do wrong? __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

08-23-2009, 03:27 PM	#6
cparman sharp as a marble Join Date: Jan 2007 Location: atlantic beach,florida Posts: 1,082	Re: how do i get the ignition tumbler out??!!!??! once you get the bezel tight, put key in, paper clip in hand, turn key to accessory put the paper clip, and turn it a bit more to the left, while pulling out on the lock cyl

08-23-2009, 03:36 PM	#7
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: how do i get the ignition tumbler out??!!!??! ok i can pull the key out while drivin down the road etc and i can still start it with a screwdriver etc..why is this? this is the whole reason i replaced this so my mexican buddy doesnt move my truck while im in school!! lol __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

08-23-2009, 05:37 PM	#8
lovnthe70 Registered User Join Date: Nov 2008 Location: Tempe, AZ Posts: 181	Re: how do i get the ignition tumbler out??!!!??! same thing with my truck, it is handy though after you start your truck but then have to run back inside for something cause you dont have to turn it off to get your house key! ill be watching to see if anyone has a solution, ive been meaning to do something about this before my truck gets stolen! __________________ 1970 GMC- 454 DONT GIVE ME NO JIBBA JABBA!!!

08-23-2009, 06:34 PM	#9
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: how do i get the ignition tumbler out??!!!??! what part did you replace? The ignition, or the tumbler? (it has a worn tumbler)

08-23-2009, 07:58 PM	#10
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: how do i get the ignition tumbler out??!!!??! the thing were the key goes in...i think the tumbler.....if you force it you can still start it with another key (my old one) __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

08-24-2009, 03:42 AM	#13
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: how do i get the ignition tumbler out??!!!??! inquiring minds want to know... __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

08-24-2009, 04:41 AM	#15
tecky11 Registered User Join Date: Jan 2009 Location: phoenix,AZ Posts: 451	Re: how do i get the ignition tumbler out??!!!??! that is a good question, in my 72 i have the sameproblem. the door key you have to use the real key, but the iginitions anythin works as long as it fits in the hole. any ideas? inquiring minds wnat to know!

08-24-2009, 09:12 AM	#16
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,685	Re: how do i get the ignition tumbler out??!!!??! Well, if 'anything' will fit in the hole and turn it, then that's what you would use to get it out. If you don't have a key and nothing else will turn it, then I don't know. PM LocDoc, he'd probably know. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

08-24-2009, 09:44 AM	#17
2tons of fun Account Suspended Join Date: Jan 2009 Location: galt ca, Posts: 749	Re: how do i get the ignition tumbler out??!!!??! my short fleet had the same anything will start it prob, i would for get to get my keys out of my pocket so i would just use my knife. now im on the other end of the problem, i bought a truck and the guy lost the key, i told him dont worry they will usualy roll over with another key or knife. no dice, the thing is tight as a drum :laughing:

08-24-2009, 10:46 AM	#18
smoky02 Registered User Join Date: Oct 2003 Location: Sunny, Florida, some might call it South Alabama Posts: 834	Re: how do i get the ignition tumbler out??!!!??! I ordered a new ignition and tumbler from ECE and my truck will only start with that key __________________ Just sold my C10...sad day... Looking for a 1972 Blazer to hopefully fill the hole in my heart.



Register or Log In To remove these advertisements.

08-24-2009, 11:01 AM	#19
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: how do i get the ignition tumbler out??!!!??! good luck 2 tons of fun, i thought the same thing when i bought my suburban, and i had hell getting everything out without the key. ended up stripping my little ign. bezel and bent the hole in the dash a little...nothing i cant fix but it still was a pita __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

08-24-2009, 02:11 PM	#20
Ont67shortbox Registered User Join Date: May 2003 Location: Ontario Posts: 279	Re: how do i get the ignition tumbler out??!!!??! I bought a new cylinder and keys from Napa,it was $23 dollars,solved the problem.

08-24-2009, 04:27 PM	#22
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: how do i get the ignition tumbler out??!!!??! if that doesn't work, then it is time to get the hammer and a big pinch out.

08-24-2009, 10:43 PM	#23
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,648	Re: how do i get the ignition tumbler out??!!!??! - As far as getting the ignition tumbler out read this post... http://67-72chevytrucks.com/vboard/s...d.php?t=358919 If your new lock cylinder is made overseas it may not have any tumblers in it. Thats why anything will turn it. On the original lock cylinders it would either be that the tumblers are stuck, bent, worn out, or someone may have removed them. The tumblers are what keeps the lock cylinder from turning unless the key is inserted. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

08-24-2009, 11:14 PM	#24
BAGNDRAGIT Just Not Low Enough! Join Date: Mar 2009 Location: Phoenix, AZ Posts: 525	Re: how do i get the ignition tumbler out??!!!??! i just replaced the whole thing, that solved all my issues.... __________________ NEED ELECTRICAL HELP? ASK ME! 67-72 Full Wiring Diagrams Lots Of Info, TAKE A LOOK 1967 Chevy C-10 Shortbox Bagged 327 4spd Previous: 1971 Chevy C-10 Short Sep I6 Auto (Traded) 1973 Chevy C-20 THE REDNECK BATTLE TRUCK 2001 Chevy Silverado 2Dr 5.3L Shortbox. R.I.P. 1969 Volkswagen Bug This is my first meeting, I have a horsepower problem.

08-25-2009, 08:21 AM	#25
KEL 72 GMC Join Date: Feb 2008 Location: Wells, Maine Posts: 534	Re: how do i get the ignition tumbler out??!!!??! I bought the matching door locks and ignition from GMC Paul's. One key works all. I'm happy with it.

Register or Log In To remove these advertisements.