The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-24-2009, 08:54 PM   #1
pjdee
Registered User
 
Join Date: Feb 2009
Location: cleveland heights ohio
Posts: 5
Vent window help!

Howdy,
I'm trying to put in a vent window on my 85 C-10. Emphasis on "trying".
I ended up getting the main window off the track and then spent the next hour or two trying to get the window back on track. No luck. So now I have nothing in the door. Just hoping it does not rain. Any hints or tips would be greatly appreciated. what to do first etc.... Many thanks in advance!
pjdee
pjdee is offline   Reply With Quote
Old 08-24-2009, 09:01 PM   #2
wydomkr
Registered User
 
Join Date: Mar 2006
Location: Rapid City, SD
Posts: 96
Re: Vent window help!

I'll be doing this in the next week or so, but from what I've read, the door glass didn't have to come out, at least I hope that's the case.
__________________
Keith
-------------
1980 C-10
1981 C-30
wydomkr is offline   Reply With Quote
Old 08-24-2009, 09:04 PM   #3
ont_guy_38
Registered User
 
ont_guy_38's Avatar
 
Join Date: Jul 2007
Location: Ontario Canada
Posts: 1,006
Re: Vent window help!

k i will try and explain how i used to do it but it,s been awhile.First of all remove the bolts from the back track and then roll down the window slide it all the way towards the back of the door this will give you enough room to slide the new vent window into the door once you get that in and bolted down just slide the window into the vent window track put the rear track back in place making sure the window is sitting in it tighten bolts and thats it.I used to be able to transfer the whole guts in about 15 minutes on one of these doors
ont_guy_38 is offline   Reply With Quote
Old 08-24-2009, 09:05 PM   #4
pjdee
Registered User
 
Join Date: Feb 2009
Location: cleveland heights ohio
Posts: 5
Re: Vent window help!

I was able to get the vent window in and I thought I was done
(insert laugh track) so I go to roll up the window and it was not going up straight and then it got ugly!
pjdee is offline   Reply With Quote
Old 08-24-2009, 09:06 PM   #5
pjdee
Registered User
 
Join Date: Feb 2009
Location: cleveland heights ohio
Posts: 5
Re: Vent window help!

The problem is now I can even get the window in!
pjdee is offline   Reply With Quote
Old 08-24-2009, 09:16 PM   #6
ont_guy_38
Registered User
 
ont_guy_38's Avatar
 
Join Date: Jul 2007
Location: Ontario Canada
Posts: 1,006
Re: Vent window help!

if you have knocked it out the track it,s hard to get back in without the rear channel being loose or have you have knocked it off the regulator track then
ont_guy_38 is offline   Reply With Quote
Old 08-24-2009, 09:27 PM   #7
pjdee
Registered User
 
Join Date: Feb 2009
Location: cleveland heights ohio
Posts: 5
Re: Vent window help!

Its all out, I have the glass in my garage.
I can't get the rollers in the places they go to,
one lines up the other pops out etc...
I have the 4 bolts off by the crank is that right?
thanks for taking the time to help!
pjdee is offline   Reply With Quote
Old 08-25-2009, 03:58 PM   #8
pjdee
Registered User
 
Join Date: Feb 2009
Location: cleveland heights ohio
Posts: 5
Red face Re: Vent window help!

Well I got it all back together, just needed to step away
for awhile and then it seemed to go smoothly
if you ever get a window off the tracks lower the regulator as
far as you can it will allow you get the rollers in the right places.
Like they say "experience is the best teacher, the problem
is it gives the test first and the lesson later."
Thanks again for all those who chimed to help me out!
pjdee is offline   Reply With Quote
Old 08-25-2009, 04:16 PM   #9
ont_guy_38
Registered User
 
ont_guy_38's Avatar
 
Join Date: Jul 2007
Location: Ontario Canada
Posts: 1,006
Re: Vent window help!

Glad you got it back together I was going to say yesterday just relax and take a good look at what you need to do,sometimes it,s very hard to explain in words how to do something
ont_guy_38 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:19 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com