|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
08-27-2009, 03:27 PM
|
#1 |
|
Registered User
Join Date: Oct 2005
Location: Ontario, Canada
Posts: 145
|
Where is switch for reverse lights?
I have a 1970 C10 with a 250ci six and three on the tree? Anyone know where the switch is for the reverse lights (back up lamps)? Is it on transmission or maybe the steering column?
thanks Mark |
|
|
|
08-27-2009, 03:53 PM
|
#2 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: Where is switch for reverse lights?
bottom of the steering column
|
|
|
|
|
08-27-2009, 05:47 PM
|
#3 |
|
Grandpa in the rustmobile...
Join Date: Nov 2008
Location: Spokane WA/Viola TN
Posts: 11,422
|
Re: Where is switch for reverse lights?
why when i back up in reverse my backup lights dont come on?
__________________
John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4 |
|
|
|
|
08-27-2009, 05:51 PM
|
#4 | |
|
Registered User
Join Date: Dec 2008
Location: Yay Area CA
Posts: 2,329
|
Re: Where is switch for reverse lights?
Three on the tree as in manual trans should be on the tranny.
__________________
1965 GMC shortwide big window 1969 Chevy C20 long (for now) 2005 Silverado 2500HD Crew Cab Quote:
|
|
|
|
|
|
08-27-2009, 06:03 PM
|
#5 |
|
I am a Referee of life.
Join Date: Jun 2000
Location: Greensboro N.C.
Posts: 13,993
|
Re: Where is switch for reverse lights?
Mines on the lower part of the column.IIRC it is on top where it's hard to see or get to.If the lights aren't working try adjusting it first.It adjusts by loosening the bolts and sliding it slightly.You need to have the key on and the tranny in reverse.Then when they light the adjustment should be good.Tighten the bolts and shift out to be sure they go off before putting the tools away.If this doesn't work try jumping the two wires going to it.Then you can be pretty sure the switch isn't causing the problem.It's a fun position to get into so be sure and take everything with you the first time.
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" |
|
|
|
|
08-27-2009, 06:06 PM
|
#6 |
|
CAN'T FIX NOTHIN
Join Date: Sep 2006
Location: SOUTHRUST VIRGINIA !!!
Posts: 2,112
|
Re: Where is switch for reverse lights?
my 67 3spd on the column has the switch on the steering column , it is factory because I ordered a new one at NAPA but when I took it apart the only thing wrong with my old one was it had the little tab broke off , I put the tab back on with JB WELD in 06 and it has worked fine since ,,
__________________
1967 C10 Shortbed Fleetside Small back glass 6 cyl 3spd on the tree 3.08 gears underdash AC |
|
|
|
|
08-27-2009, 06:07 PM
|
#7 | |
|
Senior Member
Join Date: Nov 2003
Location: Brookings, SD
Posts: 10,497
|
Re: Where is switch for reverse lights?
Quote:
__________________
Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs. |
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
