Air Lift Dominator 2600, what fittings?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dznucks · 08-26-2009, 03:27 PM

I am tyring to find fittings for my dominator 2600's. i believe its a 3/4" NPT hole for the air fitting. Can anyone confirm? I am running 3/8" line and need a 90 deg, swivel, push-to-lock style fitting.

i can only find a 3/8" tube X 1/2" NPT 90 degree swivel. the only way i can see making that work is to use a 3/4" npt X 1/2" npt bushing.

I am going to be using bag hats so i need a 90 degree and it needs to be as low profile as possible to reduce the height of the bag hat.

what are yall using? Got part numbers? pics?

**kev2809** · 08-26-2009, 05:15 PM

I thought the dom 2600 come with 1/2 ports.. I haven't got my fittings yet but im using 4 of the 2600 dom and I think the site says 1/2" ports

chevygurly · 08-26-2009, 06:38 PM

yes they are 1/2" ports on the dom bags

**michael bustamante** · 08-26-2009, 07:23 PM

yea I bought 1/2 npt to 3/8 pushloks. get the brass ones, I heard the plastic ones arent so great

dznucks · 08-27-2009, 12:26 PM

yea, ok. i'm an idiot. i should have looked up the thread specs before.....of course i was assuming that because it physically measured 3/4 it was 3/4.

thanks

ShowSS12 · 08-28-2009, 12:42 AM

Quote:

Originally Posted by michael bustamante

yea I bought 1/2 npt to 3/8 pushloks. get the brass ones, I heard the plastic ones arent so great

get the numatik nickle ones....

dznucks · 08-28-2009, 07:44 AM

i ordered them from fastenal. they are nickel plated brass push-locks.

part # 0443084 $31.50 for a 5 pack. compare to ART's $11 for one.

08-26-2009, 03:27 PM	#1
dznucks Registered User Join Date: Feb 2006 Location: Smyrna, Ga Posts: 1,647	Air Lift Dominator 2600, what fittings?? I am tyring to find fittings for my dominator 2600's. i believe its a 3/4" NPT hole for the air fitting. Can anyone confirm? I am running 3/8" line and need a 90 deg, swivel, push-to-lock style fitting. i can only find a 3/8" tube X 1/2" NPT 90 degree swivel. the only way i can see making that work is to use a 3/4" npt X 1/2" npt bushing. I am going to be using bag hats so i need a 90 degree and it needs to be as low profile as possible to reduce the height of the bag hat. what are yall using? Got part numbers? pics?

08-26-2009, 05:15 PM	#2
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,170	Re: Air Lift Dominator 2600, what fittings?? I thought the dom 2600 come with 1/2 ports.. I haven't got my fittings yet but im using 4 of the 2600 dom and I think the site says 1/2" ports __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

08-26-2009, 06:38 PM	#3
chevygurly Registered User Join Date: Apr 2009 Location: California Posts: 22	Re: Air Lift Dominator 2600, what fittings?? yes they are 1/2" ports on the dom bags

08-26-2009, 07:23 PM	#4
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,850	Re: Air Lift Dominator 2600, what fittings?? yea I bought 1/2 npt to 3/8 pushloks. get the brass ones, I heard the plastic ones arent so great __________________ 1967custom

08-27-2009, 12:26 PM	#5
dznucks Registered User Join Date: Feb 2006 Location: Smyrna, Ga Posts: 1,647	Re: Air Lift Dominator 2600, what fittings?? yea, ok. i'm an idiot. i should have looked up the thread specs before.....of course i was assuming that because it physically measured 3/4 it was 3/4. thanks

08-28-2009, 07:44 AM	#7
dznucks Registered User Join Date: Feb 2006 Location: Smyrna, Ga Posts: 1,647	Re: Air Lift Dominator 2600, what fittings?? i ordered them from fastenal. they are nickel plated brass push-locks. part # 0443084 $31.50 for a 5 pack. compare to ART's $11 for one.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.