What would you do to this truck?

[Ben IV]

make it lay frame on a set on vintec's or salt flats.

[aggie91]

Originally Posted by lolife99

Rolling "showcase" for new Porterbuilt products! (the mild version)
As in, a-arms, trans crossmember, trailing arm crossmember, tubular trailing arms, and a cool set of 20's. Billet Specialties (grey centered) Bonnevilles would be my choice.

Originally Posted by N2TRUX

I would put it as low as it would go with out cutting the bed. Add a set of 22's and drive the snot out of it.

I like both of these ideas, leave the body alone...

Another idea is to use your new tubular arms front and rear with your and swap the 8" ralys in front for some 7's or 6.5" (from a van) with a better tire combination, use Accu Air's ride height system.

Then, DRIVE IT!!

[GVizzle]

Originally Posted by aggie91

I like both of these ideas, leave the body alone...

Another idea is to use your new tubular arms front and rear with your and swap the 8" ralys in front for some 7's or 6.5" (from a van) with a better tire combination, use Accu Air's ride height system.

Then, DRIVE IT!!

The body, as far as Paint and trim, will be left alone.

The drop will be Extreme.

Tire and wheel setup will be a 20 front 22 rear with grey centers

Leaning toward

Wheel Vintiques series 90 billet rally

Billet Specialties Bonneville-G

Opinions Please............................

Oh, and of course It will be a driver.

[PipsC10]

I vote for the billet rally

[SCOTI]

Originally Posted by GVizzle

The body, as far as Paint and trim, will be left alone.

The drop will be Extreme.

Tire and wheel setup will be a 20 front 22 rear with grey centers

Leaning toward

Wheel Vintiques series 90 billet rally

Billet Specialties Bonneville-G

Opinions Please............................

Oh, and of course It will be a driver.

No billet ralleys. I love ralleys (even the measely 15" steel variety). But I do not like the large diameter car ralley on a truck. Will it be a PB 4-link DM out back or ??

[c10addict]

Originally Posted by SCOTI

No billet ralleys. I love ralleys (even the measely 15" steel variety). But I do not like the large diameter car ralley on a truck. Will it be a PB 4-link DM out back or ??

I agree with SCOTI... No dice on the big ralleys!!!

[GVizzle]

Originally Posted by SCOTI

No billet ralleys. I love ralleys (even the measely 15" steel variety). But I do not like the large diameter car ralley on a truck. Will it be a PB 4-link DM out back or ??

Thanks for the imput Guys.

Yes, PB 4-link DM. Dont worry the bed will be very well made.

Also, 1" BD.

[Blitz]

I vote FOR grey Billet Rallies w/ 20/20 combo.

[chevellelover]

i would lower it in the front and get a cowl hood and paint it to match and then drive the piss out of it!!!!!!!!

[shifty]

Originally Posted by shifty

shave the reflectors
Remove the lower trim
1pc windows
take down the drip rail
shave the front bumper and tuck it up more
pancake the hood
take the front down a minimum of 2"
relocate gas tank

i would also get rid of the bobo stock mirrors and consider doing a 67/68 front end swap instead of pancaking the hood the front end on the 67/68 trucks is soooo much hotter

[XXL]

This wheel is available in a 26" ... maybe just coat the circumference in some black Dip-n-Grip instead of mounting tires

[Ronm909]

stay away from Wheelsnext. do a google on them. but add fraud in the text. just had a nightmare of an experiance. took me for 600$ and left me hanging. took a complaint to the BBB and a month later to get my money back..