71 3/4 chevy 2wd getting parted now - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 09-03-2009, 11:45 PM

This was a running truck within the last year. Ask questions in thread. Pay pal or money or cash. I don't charge any pay pal fees!!!
NO SHIPPING GRILLS, fenders, hoods, beds, doors, rearends, frontends, cabs, rear bumpers, radiator supports, seat
I'm going to try to get it parted over the weekend if I'm lucky enough to have time
If I don't have a part you need priced ask and I'll price in thread

There are pics of everything taken off at the bottom of this page and on the 2nd page
outer grill, one dent on pass side $75, inner is broke
power brake booster $40 plus shipping
air cleaner and spacer $25 plus shipping
power steering pump and brackets $40 plus ship
motor pullies $30 shipped, lower crank pulley has a chip out of it
shroud, has a tab broke off $15 plus shipping with lower clips, it was tight on truck-SOLD
Edlebrock carb, SOLD
oil filler $15 plus shipping
front bumper $25, one bend in it-sold
front turn signals housings and lens $32 shipped
front headlight/alt wiring is good $30 shipped
engine wiring is good $22 shipped-SOLD
HEI is good $25 plus shipping-SOLD
7 blade fan and clutch $20 plus shipping
Th350 automatic linkage $25 plus shipping
AT crossmember $50 shipped
350 Motor and tranny $100-sold
Alternator brackets $30 shipped
steering column $40 plus shipping
ps box $25 plus shipping
gauge setup $35 shipped-SOLD
under dash wiring, if good $40 shipped-SOLD
front fenders $50 pair-SOLD
wing windows $30 plus shipping, pass side has some wear on chrome, drivers side
cigarette lighter assembly $18 shipped
radio with knobs $30 shipped, unknown condition-SOLD
Thanks Randy
pass side door panel $15-SOLD

teeitup · 09-03-2009, 11:48 PM

7888888888

teeitup · 09-03-2009, 11:49 PM

833333333333

teeitup · 09-03-2009, 11:50 PM

86666666666

sjarrett71 · 09-04-2009, 12:33 AM

If the linkage for the TH350 is the same for a TH400 I will take it.

**71blksuper4x4** · 09-04-2009, 12:34 AM

Randy, I would like to speak for the bumper for the moment. My buddy is looking for one to replace a badly damaged one on his truck. How nice is the grille emblem? I might be interested in it. Also, do you have a nice 71-72 grille setup? Thanks Trevor

**71blksuper4x4** · 09-04-2009, 12:36 AM

Oh, BTW, where is the dealer emblem from? Someday I might track down something from my hometown and I am always on the hunt.

8bolt · 09-04-2009, 01:36 AM

HI Randy how are the wheel tubs in this one.Thanks 8bolt

teeitup · 09-04-2009, 07:16 AM

sjarrett71, some turbo 400 have a different frame bracket that looks like a 4x4 bracket. I'm pretty suire it will work though. You might ask on message board for sure
71blksuper4x4, Trevor, I can hold the bumper till you find out, emblem isn't bad but not perfect. I think I have a pretty decent grill setup out there, I'm going to start a thread this weekend on them. I'll look I may have a dealer emblem from Osage City
8bolt, I'll look after work
Thanks Randy

kacz81 · 09-04-2009, 07:24 AM

I'll take the fan shroud and a price/size for the carb

kacz81 · 09-04-2009, 07:52 AM

I'll get in line on the front bumper if you will ship it

OLEBEATER · 09-04-2009, 08:03 AM

Hey Randy, I see that this truck has the flat type bracket on the brake booster; I will take that one if available. Put a price on that with the rest of my things (bolt, spacer and clutch hole cover) and let me kno the total. Zip is 22435. Thanks........Roland

gcburdic · 09-04-2009, 12:42 PM

Boy Randy, that front clip looks good!!!...Wished I lived closer...unless of course you'll ship!!

n8wgc · 09-04-2009, 01:02 PM

Randy: Can you give a price on the
rear view mirror and cost to ship to
the 48843 zip code.
Bud
Howell, Mich

TomBennett · 09-04-2009, 01:04 PM

What kind of shape is the core support in and if good how much? I live in the kc area and could come pick it up.

TomBennett · 09-04-2009, 01:06 PM

What is broke on the inner grill? I don't see it in the pics. I also need an inner fender well for passenger side.

teeitup · 09-04-2009, 06:42 PM

Guys, I just got off work, I'll get with everyone Sat, I have a birthday party tonight

8bolt, tubs are beat up, sorry
kacz81, I'll get a pic of shoud where its broke. Also I'll figure out the carb. Sorry no shipping bumper
Olebeater, Roland, are you needing one for a 3/4 or 1/2 they are different lengths.
gcburdic, Geoff, it isn't bad, sorry about the shipping, lol
n8wgc, Bud, $15 shipped for rearview mirror
TomBennett, support is rusted on pass side. Inner grill has broken clips on top, I have some others, I'm starting a thread this weekend on grills. I also have some inners around here.

Thanks Randy

**too much stuff** · 09-04-2009, 07:09 PM

Hi randy, what is the story with the pass. door panel? Eric

FOREVER71 · 09-04-2009, 11:45 PM

hoe does the tail light harness look?..let me know cost if it looks good...thanks

Cyclone44 · 09-05-2009, 06:31 AM

This is sold Randy!..........engine wiring is good $22 shipped.....

OLEBEATER · 09-05-2009, 04:10 PM

Need one for my half ton Randy, never thought about the difference.

teeitup · 09-05-2009, 10:06 PM

Toomuchstuff, Eric, its in pretty good shape $15 plus ship or I can hold it for you
Forever71, its hacked up, sorry
Cyclone$$, George, I got it off and there is pic to follow, it has one cut wire that goes to starter, see pic
Olebeater, Roland, sorry I forgot to tell you about that
Thanks Randy

teeitup · 09-05-2009, 10:08 PM

Got it most the way parted just have to pull motor and tranny and also tranny crossmember
Pics for everyone, sorry no shipping prices yet
Thanks Randy

teeitup · 09-05-2009, 10:09 PM

9555555555

teeitup · 09-05-2009, 10:10 PM

400000000000

09-03-2009, 11:45 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	71 3/4 chevy 2wd getting parted now This was a running truck within the last year. Ask questions in thread. Pay pal or money or cash. I don't charge any pay pal fees!!! NO SHIPPING GRILLS, fenders, hoods, beds, doors, rearends, frontends, cabs, rear bumpers, radiator supports, seat I'm going to try to get it parted over the weekend if I'm lucky enough to have time If I don't have a part you need priced ask and I'll price in thread There are pics of everything taken off at the bottom of this page and on the 2nd page outer grill, one dent on pass side $75, inner is broke power brake booster $40 plus shipping air cleaner and spacer $25 plus shipping power steering pump and brackets $40 plus ship motor pullies $30 shipped, lower crank pulley has a chip out of it shroud, has a tab broke off $15 plus shipping with lower clips, it was tight on truck-SOLD Edlebrock carb, SOLD oil filler $15 plus shipping front bumper $25, one bend in it-sold front turn signals housings and lens $32 shipped front headlight/alt wiring is good $30 shipped engine wiring is good $22 shipped-SOLD HEI is good $25 plus shipping-SOLD 7 blade fan and clutch $20 plus shipping Th350 automatic linkage $25 plus shipping AT crossmember $50 shipped 350 Motor and tranny $100-sold Alternator brackets $30 shipped steering column $40 plus shipping ps box $25 plus shipping gauge setup $35 shipped-SOLD under dash wiring, if good $40 shipped-SOLD front fenders $50 pair-SOLD wing windows $30 plus shipping, pass side has some wear on chrome, drivers side cigarette lighter assembly $18 shipped radio with knobs $30 shipped, unknown condition-SOLD Thanks Randy pass side door panel $15-SOLD Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 09-15-2009 at 09:52 PM.

09-03-2009, 11:48 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 3/4 chevy 2wd getting parted now 7888888888 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-03-2009, 11:49 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 3/4 chevy 2wd getting parted now 833333333333 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-03-2009, 11:50 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 3/4 chevy 2wd getting parted now 86666666666 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-04-2009, 12:33 AM	#5
sjarrett71 Registered User Join Date: Dec 2006 Location: Rolla, MO Posts: 2,463	Re: 71 3/4 chevy 2wd getting parted now If the linkage for the TH350 is the same for a TH400 I will take it. __________________ -Scott-

09-04-2009, 12:34 AM	#6
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,152	Re: 71 3/4 chevy 2wd getting parted now Randy, I would like to speak for the bumper for the moment. My buddy is looking for one to replace a badly damaged one on his truck. How nice is the grille emblem? I might be interested in it. Also, do you have a nice 71-72 grille setup? Thanks Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever Last edited by 71blksuper4x4; 09-04-2009 at 12:40 AM.

09-04-2009, 12:36 AM	#7
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,152	Re: 71 3/4 chevy 2wd getting parted now Oh, BTW, where is the dealer emblem from? Someday I might track down something from my hometown and I am always on the hunt. __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

09-04-2009, 01:36 AM	#8
8bolt Registered User Join Date: May 2005 Location: COLD COUNTY Posts: 168	Re: 71 3/4 chevy 2wd getting parted now HI Randy how are the wheel tubs in this one.Thanks 8bolt

09-04-2009, 07:16 AM	#9
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 3/4 chevy 2wd getting parted now sjarrett71, some turbo 400 have a different frame bracket that looks like a 4x4 bracket. I'm pretty suire it will work though. You might ask on message board for sure 71blksuper4x4, Trevor, I can hold the bumper till you find out, emblem isn't bad but not perfect. I think I have a pretty decent grill setup out there, I'm going to start a thread this weekend on them. I'll look I may have a dealer emblem from Osage City 8bolt, I'll look after work Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-04-2009, 07:24 AM	#10
kacz81 Registered User Join Date: Jul 2009 Location: Shorewood,IL. Posts: 75	Re: 71 3/4 chevy 2wd getting parted now I'll take the fan shroud and a price/size for the carb

09-04-2009, 07:52 AM	#11
kacz81 Registered User Join Date: Jul 2009 Location: Shorewood,IL. Posts: 75	Re: 71 3/4 chevy 2wd getting parted now I'll get in line on the front bumper if you will ship it

09-04-2009, 08:03 AM	#12
OLEBEATER Registered User Join Date: Mar 2009 Location: Virginia Posts: 295	Re: 71 3/4 chevy 2wd getting parted now Hey Randy, I see that this truck has the flat type bracket on the brake booster; I will take that one if available. Put a price on that with the rest of my things (bolt, spacer and clutch hole cover) and let me kno the total. Zip is 22435. Thanks........Roland

09-04-2009, 12:42 PM	#13
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: 71 3/4 chevy 2wd getting parted now Boy Randy, that front clip looks good!!!...Wished I lived closer...unless of course you'll ship!! __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

09-04-2009, 01:02 PM	#14
n8wgc Registered User Join Date: Oct 2008 Location: Howell Michigan Posts: 25	Re: 71 3/4 chevy 2wd getting parted now Randy: Can you give a price on the rear view mirror and cost to ship to the 48843 zip code. Bud Howell, Mich

09-04-2009, 01:04 PM	#15
TomBennett Registered User Join Date: Aug 2009 Location: Peculiar, MO Posts: 61	Re: 71 3/4 chevy 2wd getting parted now What kind of shape is the core support in and if good how much? I live in the kc area and could come pick it up.



Register or Log In To remove these advertisements.

09-04-2009, 01:06 PM	#16
TomBennett Registered User Join Date: Aug 2009 Location: Peculiar, MO Posts: 61	Re: 71 3/4 chevy 2wd getting parted now What is broke on the inner grill? I don't see it in the pics. I also need an inner fender well for passenger side.

09-04-2009, 06:42 PM	#17
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 3/4 chevy 2wd getting parted now Guys, I just got off work, I'll get with everyone Sat, I have a birthday party tonight 8bolt, tubs are beat up, sorry kacz81, I'll get a pic of shoud where its broke. Also I'll figure out the carb. Sorry no shipping bumper Olebeater, Roland, are you needing one for a 3/4 or 1/2 they are different lengths. gcburdic, Geoff, it isn't bad, sorry about the shipping, lol n8wgc, Bud, $15 shipped for rearview mirror TomBennett, support is rusted on pass side. Inner grill has broken clips on top, I have some others, I'm starting a thread this weekend on grills. I also have some inners around here. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-04-2009, 07:09 PM	#18
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,721	Re: 71 3/4 chevy 2wd getting parted now Hi randy, what is the story with the pass. door panel? Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

09-04-2009, 11:45 PM	#19
FOREVER71 Registered User Join Date: May 2008 Location: PORTLAND,ORGON Posts: 585	Re: 71 3/4 chevy 2wd getting parted now hoe does the tail light harness look?..let me know cost if it looks good...thanks

09-05-2009, 06:31 AM	#20
Cyclone44 Step Brother Join Date: Sep 2007 Location: K-town Posts: 4,029	Re: 71 3/4 chevy 2wd getting parted now This is sold Randy!..........engine wiring is good $22 shipped.....

09-05-2009, 04:10 PM	#21
OLEBEATER Registered User Join Date: Mar 2009 Location: Virginia Posts: 295	Re: 71 3/4 chevy 2wd getting parted now Need one for my half ton Randy, never thought about the difference.

09-05-2009, 10:06 PM	#22
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 3/4 chevy 2wd getting parted now Toomuchstuff, Eric, its in pretty good shape $15 plus ship or I can hold it for you Forever71, its hacked up, sorry Cyclone$$, George, I got it off and there is pic to follow, it has one cut wire that goes to starter, see pic Olebeater, Roland, sorry I forgot to tell you about that Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-05-2009, 10:08 PM	#23
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 3/4 chevy 2wd getting parted now Got it most the way parted just have to pull motor and tranny and also tranny crossmember Pics for everyone, sorry no shipping prices yet Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-05-2009, 10:09 PM	#24
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 3/4 chevy 2wd getting parted now 9555555555 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-05-2009, 10:10 PM	#25
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 3/4 chevy 2wd getting parted now 400000000000 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.