![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
...just another truck junkie..
![]() Join Date: May 2009
Location: Watertown, SD
Posts: 698
|
It's never simple, is it?
Tonight I was going to put new sway bar bushings on my '71. No problem, that won't take long.... So I get the sway bar off, broke a bolt, no big deal. I was planning to replace them anyway. I start cleaning up the bushing brackets and one is bent, and I mean really out of shape. That's not good.... so under the front I go.... The frame bracket on the drivers side is bent.... looking from the side it's pretty obvious, not sure how I didn't notice it before.... It's pulled forward, like a chain was wrapped around it and the truck yanked around. Great, now I get to pop those rivets and replace that bracket. Amazing how a simple job can snowball into something more
![]()
__________________
Mike "Bear" Shea |
![]() |
![]() |
![]() |
#2 |
20' Daredevil (Ret)
![]() Join Date: May 2003
Location: Jefferson State
Posts: 13,643
|
Re: It's never simple, is it?
Ain't it the truth.. Sometimes the simplest jobs can snowball into the worst pains in the.........
![]()
__________________
- Mike - 1972 K20 LWB 350/350/205 RIP El Jay |
![]() |
![]() |
![]() |
#3 |
PROJECT 7DEUCE
![]() Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,608
|
Re: It's never simple, is it?
Im pretty sure we have all been down the short to long road before.... But in the end it always turns out better than we thought.
__________________
GO BIG GREEN ![]() MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. |
![]() |
![]() |
![]() |
#4 |
Just Not Low Enough!
Join Date: Mar 2009
Location: Phoenix, AZ
Posts: 525
|
Re: It's never simple, is it?
well said frenchblue.
__________________
NEED ELECTRICAL HELP? ASK ME! 67-72 Full Wiring Diagrams Lots Of Info, TAKE A LOOK 1967 Chevy C-10 Shortbox Bagged 327 4spd ![]() Previous: 1971 Chevy C-10 Short Sep I6 Auto (Traded) 1973 Chevy C-20 *THE REDNECK BATTLE TRUCK* 2001 Chevy Silverado 2Dr 5.3L Shortbox. R.I.P. 1969 Volkswagen Bug This is my first meeting, I have a horsepower problem. |
![]() |
![]() |
![]() |
#5 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: It's never simple, is it?
if it was simple, your neighbors would all have cool trucks like us!
You probably have lame neighbors like I do huh? |
![]() |
![]() |
![]() |
#6 |
Too many toys,not enough money
Join Date: May 2008
Location: Bozeman,MT
Posts: 237
|
Re: It's never simple, is it?
yea, tell me. I spent 4 nights trying to get half of my drivers side u-bolt on the rear axle ( that was rusted solid) out so I could install the lowering blocks I spent 2 nights building! But, dang I love these trucks! Throw a 12 pack of brew into the fun, and it makes it worth it! Just have fun doing it.
|
![]() |
![]() |
![]() |
#7 |
...just another truck junkie..
![]() Join Date: May 2009
Location: Watertown, SD
Posts: 698
|
Re: It's never simple, is it?
That is an understatement ![]()
__________________
Mike "Bear" Shea |
![]() |
![]() |
![]() |
#8 | |
Registered User
Join Date: Jul 2003
Location: Cypress, Tx
Posts: 4,005
|
Re: It's never simple, is it?
Quote:
Shawn
__________________
1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE |
|
![]() |
![]() |
![]() |
#9 |
Watch out for your cornhole !
![]() Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Re: It's never simple, is it?
Just take a mini sledge and beat it back as straight as you can. It doesn't have to be perfect.
__________________
I'm on the Instagram- @Gearhead_Kevin |
![]() |
![]() |
![]() |
#10 | |
...just another truck junkie..
![]() Join Date: May 2009
Location: Watertown, SD
Posts: 698
|
Re: It's never simple, is it?
Quote:
For most people that would be perfectly fine. Problem is, I'm an anal-retentive perfectionist so not having it perfect will bug the ever loving crap out of me ![]()
__________________
Mike "Bear" Shea |
|
![]() |
![]() |
![]() |
#11 |
Watch out for your cornhole !
![]() Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Re: It's never simple, is it?
Oh, I understand that. I have never found anyone sicker than myself in the OCD arena. Carry on !
__________________
I'm on the Instagram- @Gearhead_Kevin |
![]() |
![]() |
![]() |
#12 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: It's never simple, is it?
I have something like OCD... but it is called CDO... in alphabetical order... like it should be!!!
With me, everrything has to be symetrical, otherrwise it bugs the crap outta me. Just take a hammer, and try to straighten the bent one, and when it is close, go to the other side, and bent it so it isn't perfect... then they'll match! |
![]() |
![]() |
![]() |
#13 |
Senior Member
![]() Join Date: Sep 2007
Location: Albuquerque NM
Posts: 7,848
|
Re: It's never simple, is it?
ok ocd Bear! i got a set of those brackets in the parts for sale section if youre interested
__________________
1967custom Last edited by michael bustamante; 09-04-2009 at 07:13 PM. |
![]() |
![]() |
![]() |
#14 | |
Watch out for your cornhole !
![]() Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Re: It's never simple, is it?
Quote:
__________________
I'm on the Instagram- @Gearhead_Kevin |
|
![]() |
![]() |
![]() |
#15 |
Redefining LowBudget
Join Date: Mar 2009
Location: lebanon Cow Hampshire
Posts: 4,538
|
Re: It's never simple, is it?
if it make you feel better my truck is up on jack stands.....
this mornng I decided it was time to pull the A/C box off and get my air contol damper working proprly since it's starting to get cool in the evening ...so I dump the air bags to make it easy to reach over the rad support pull it all aprt find broken heater/defrost door which has to come out from the otherside so screw it that will be a project for another day....I do find out why my fan only has one speed ( high) I plug it back inot the resitor so theres a FREE BE that I have been chasing for awhile... so I clean every thing back up put it back together things are going well and I'm pretty happy and making good time..........Until......after I clean up I jump in the truck and air it up ...CLUNK?????? WTF is that!!! so I jump out and bounce the hell out of the fender and CLUNK ??CLUNK??CLUNK??.. out comes the jack up in the air on the jackstand ...Looks like my upper control arm bushings are gone so I did find one @ Advanced Auto for $21 complete so at least it was cheap ( Napa was $52) So I guess I know what I'm doing tomorrow........ |
![]() |
![]() |
![]() |
#16 |
Registered User
![]() Join Date: Nov 2006
Location: KINGSPORT,TN.
Posts: 3,035
|
Re: It's never simple, is it?
Good to know i,am not the only one this happens to. Drive on fella....
__________________
I BELIEVE IN JOHN 3:16 |
![]() |
![]() |
![]() |
#17 | |
Registered User
Join Date: Jan 2007
Location: Denton, Texas
Posts: 356
|
Re: It's never simple, is it?
Quote:
![]()
__________________
Andrew '69 C-20(292, 4-speed) Retired Daily Driver '64 C-10(250, 3-speed) Fixerupper '97 F*rd Mustang GT(4.6L, 5-speed) Daily Driver If I only wanted two pedals I'd have bought a bicycle.
![]() Last edited by MXmaniac; 09-05-2009 at 01:36 AM. |
|
![]() |
![]() |
![]() |
#18 | ||||
...just another truck junkie..
![]() Join Date: May 2009
Location: Watertown, SD
Posts: 698
|
Re: It's never simple, is it?
Quote:
Quote:
![]() ![]() Quote:
Quote:
![]() Yes, they were... and the worst part is that I know better than to have that attitude. I've been down this road many times, you would think I would be much more pessimistic when it comes to fixing anything.
__________________
Mike "Bear" Shea |
||||
![]() |
![]() |
![]() |
Bookmarks |
|
|