|
09-05-2009, 12:02 PM
|
#1 |
|
Registered User
Join Date: Apr 2008
Location: Houston, Texas
Posts: 11
|
Brake problems...
MY NEIGHBOR HAS A 68-GMC THAT HE HIS WORKING ON FOR A CUSTOMER, AND IT HAS NEW WHEEL CYLINDERS ALL THE WAY AROUND, NO LEAKS, BUT HE HAS WENT THROUGH 6 MASTER CYLINDERS, NEW FROM THE PARTS HOUSE, BENCH BLED THEM ALL PRIOR TO INSTALLATION, AND I HELPED HIM BLEED THEM AFTER THEY WERE PUT ON. STILL GOES ALMOST TO THE FLOOR ONCE BLED. WE FIGURE THE MASTER CYLINDER IS ALL IT CAN BE, BUT GETTING 6 BAD ONES? WE WOULD REALLY APPRECIATE ANY FEEDBACK ON THIS FROM YOU GUYS.
THANKS, SHORTBED HARDHEAD..HOUSTON 
|
|
|
|
09-06-2009, 03:27 PM
|
#2 |
|
67-72 parts collector,…
 
Join Date: Nov 2002
Location: Mid-MO
Posts: 22,700
|
Re: Brake problems...
Are you getting good fluid at each corner with no air in the lines?
Are the shoes adjusted out enough?
__________________
Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 |
|
|
|
|
09-06-2009, 04:45 PM
|
#3 |
|
Registered User
Join Date: Apr 2009
Location: swindon, england
Posts: 290
|
Re: Brake problems...
I have just had the very same problem, it would lock up the brakes but the pedal was allmost on the floor, It turned out that i had been sent the wrong bore inside the master cylnder,
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
