Research help needed - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Manuel Raptor · 08-31-2009, 03:09 PM

I am looking for some of these brackets if someone has some for sale please let me know. Thanks

BLAZEtoBLAZE · 08-31-2009, 03:13 PM

Yes they are different in a big way. LMC and every where else i have been looking on the internet says they fit both trucks and blazers. I finally found a driver side bracket for a blazer a while back still looking for a pass. side one though

bouncytruck · 08-31-2009, 03:43 PM

BLAZEtoBLAZE, if you become a subscribing member, you can post a "wanted to buy" thread and I'm someone on the board has the part(s) you need.

Now, back to the topic - carpet strips and tailgate seal retainers would be good. I've also seen a lot of demand for complete bedsides.

jb4short · 08-31-2009, 04:11 PM

Quote:

Originally Posted by bouncytruck

BLAZEtoBLAZE, if you become a subscribing member, you can post a "wanted to buy" thread and I'm someone on the board has the part(s) you need.

Now, back to the topic - carpet strips and tailgate seal retainers would be good. I've also seen a lot of demand for complete bedsides.

Thanks- can you e-mail me any pictures of what parts I'm looking for?

AJs72K5 · 08-31-2009, 04:51 PM

Firewall heater delete...covers for when the evaporator (AC) / heater core (non-AC) box and fan are removed.

vtblazer · 08-31-2009, 05:29 PM

Quote:

Originally Posted by bouncytruck

I'm sure someone on the board has the part(s) you need.

I have a pair, I'll send ya a pm.

Quote:

Originally Posted by Tri-ProAutomotive

Thanks- can you e-mail me any pictures of what parts I'm looking for?

Jon,
There will be tail gate seal retainer going into the package too.

jb4short · 08-31-2009, 06:53 PM

Quote:

Originally Posted by vtblazer

I have a pair, I'll send ya a pm.

Jon,
There will be tail gate seal retainer going into the package too.

awesome- thanks Kurt

jb4short · 08-31-2009, 06:53 PM

Quote:

Originally Posted by AJs72K5

Firewall heater delete...covers for when the evaporator (AC) / heater core (non-AC) box and fan are removed.

doesn't the guy in Canada do those?

**jaros44sr** · 08-31-2009, 07:40 PM

Since it is so costly to make a complete wind shield, how about a patch panel...12"- 15" long. Doesn't even have to have the bump in it

AJs72K5 · 08-31-2009, 07:53 PM

Quote:

Originally Posted by Tri-ProAutomotive

doesn't the guy in Canada do those?

There's a guy in Canada, eh?

**jaros44sr** · 08-31-2009, 08:32 PM

Quote:

Originally Posted by AJs72K5

There's a guy in Canada, eh?

There's also a guy from Maine-ah

**jaros44sr** · 08-31-2009, 08:37 PM

Quote:

Originally Posted by bouncytruck

BLAZEtoBLAZE, if you become a subscribing member, you can post a "wanted to buy" thread and I'm someone on the board has the part(s) you need.

good idea

Quote:

Originally Posted by BLAZEtoBLAZE

Yes they are different in a big way. LMC and every where else i have been looking on the internet says they fit both trucks and blazers. I finally found a driver side bracket for a blazer a while back still looking for a pass. side one though

When BLAZEtoBLAZE turns blue, PM me your home addy and I'll send you one

BTW,

Best 25 bucks you'll ever invest in your truck

jb4short · 09-01-2009, 08:22 AM

Quote:

Originally Posted by AJs72K5

There's a guy in Canada, eh?

Here you go: http://www.infantirides.com/products/007.htm

AJs72K5 · 09-01-2009, 08:52 AM

Quote:

Originally Posted by Tri-ProAutomotive

Here you go: http://www.infantirides.com/products/007.htm

Yeah...those have to be welded in. I just had my firewall painted (before I decided to remove the AC), so I'm not ready to weld on it just yet. Was thinking more along the lines of what Vintage Air includes in their AC setup.

red71cheyenne · 09-03-2009, 01:16 AM

Did anyone say an entire kick panel from floor to the bottom of the air vent for passenger and driver's side?

And how about the little portion where the gas pedal studs mount.

Second on the entire bed floor, blazer specific, don't know if its identical to short bed, I've never owned one.

Also second on the carpet strips made of pre-molded stainless, both front and rear. I have one for a template I can send when I get home in November. Not sure if its front or rear.

robs71k5 · 09-04-2009, 12:41 AM

Radiator tubes are not reproduced either

I now have a dye to press out rear seat tie down brackets .They are very close to originals .I form with 4130 steel ,a grade wich is superior to mild steel ones from factory .The gage is a little thinner but never the less looks and strength are not comprimized. I will be tweaking the form to eventually bend stainless aswell in the same gage as orig.email me direct if anyone wants a set to robandsandy@shaw.ca
This was in responce to remanufactured parts not being made .and indentifying that I am not commercial just hobbiest but cost are associated with building such parts .Once again not intending on breaking any rules here and my appauligies if I have Thanks

JimmyFloyd · 09-07-2009, 11:26 PM

This is what I am talking about. The windshield frame is three parts. If you could make any of the three parts, it would be great.

08-31-2009, 03:09 PM	#26
Manuel Raptor Registered User Join Date: Jun 2009 Location: Diamond Bar, Ca Posts: 94	Re: Research help needed I am looking for some of these brackets if someone has some for sale please let me know. Thanks __________________ 72 K5 CST Last edited by Manuel Raptor; 08-31-2009 at 03:10 PM.

08-31-2009, 03:13 PM	#27
BLAZEtoBLAZE Registered User Join Date: Mar 2009 Location: Ottawa, Ks Posts: 18	Re: Research help needed Yes they are different in a big way. LMC and every where else i have been looking on the internet says they fit both trucks and blazers. I finally found a driver side bracket for a blazer a while back still looking for a pass. side one though __________________ 56 GMC Coe 3 door 49 GM COE custom built street rod 84 Blazer 12in Lift 70 Nova pro street project

08-31-2009, 03:43 PM	#28
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Re: Research help needed BLAZEtoBLAZE, if you become a subscribing member, you can post a "wanted to buy" thread and I'm someone on the board has the part(s) you need. Now, back to the topic - carpet strips and tailgate seal retainers would be good. I've also seen a lot of demand for complete bedsides. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L Last edited by bouncytruck; 08-31-2009 at 03:45 PM.

08-31-2009, 04:51 PM	#30
AJs72K5 Registered User Join Date: Nov 2007 Location: South Tx Posts: 1,083	Re: Research help needed Firewall heater delete...covers for when the evaporator (AC) / heater core (non-AC) box and fan are removed. __________________ - AJ Gray Matter Build - 1972 K5 with some stuff Last edited by AJs72K5; 08-31-2009 at 04:52 PM.

08-31-2009, 07:40 PM	#34
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,761	Re: Research help needed Since it is so costly to make a complete wind shield, how about a patch panel...12"- 15" long. Doesn't even have to have the bump in it __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 08-31-2009 at 07:41 PM.

09-03-2009, 01:16 AM	#40
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: Research help needed Did anyone say an entire kick panel from floor to the bottom of the air vent for passenger and driver's side? And how about the little portion where the gas pedal studs mount. Second on the entire bed floor, blazer specific, don't know if its identical to short bed, I've never owned one. Also second on the carpet strips made of pre-molded stainless, both front and rear. I have one for a template I can send when I get home in November. Not sure if its front or rear. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

09-04-2009, 12:41 AM	#41
robs71k5 K5drive Join Date: Nov 2004 Location: burnaby BC Canada Posts: 815	Re: Research help needed Radiator tubes are not reproduced either I now have a dye to press out rear seat tie down brackets .They are very close to originals .I form with 4130 steel ,a grade wich is superior to mild steel ones from factory .The gage is a little thinner but never the less looks and strength are not comprimized. I will be tweaking the form to eventually bend stainless aswell in the same gage as orig.email me direct if anyone wants a set to robandsandy@shaw.ca This was in responce to remanufactured parts not being made .and indentifying that I am not commercial just hobbiest but cost are associated with building such parts .Once again not intending on breaking any rules here and my appauligies if I have Thanks

09-07-2009, 11:26 PM	#42
JimmyFloyd Registered User Join Date: Apr 2009 Location: Rochester, NY Posts: 1,458	Re: Research help needed This is what I am talking about. The windshield frame is three parts. If you could make any of the three parts, it would be great. __________________ 1970 Blazer 350/SM465/205 SOLD! \| 1998 Z3



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.