Jack, crank, lug tool, and a long (hold-down?) spring out of a '67 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jim_PA · 08-22-2009, 11:57 PM

I've seen others claiming this design is orignal, but I still don't have any way of knowing for sure, other than it did come out of a 67 C10:

PRICE CUT! $30 + shipping

Jim_PA · 08-24-2009, 11:16 PM

This is cheaper than AAA service!

Jim_PA · 08-25-2009, 09:03 PM

any takers?

jsmithbm · 08-25-2009, 09:09 PM

how much is shipping to 30297?

Jim_PA · 08-25-2009, 10:03 PM

$8

jsmithbm · 08-25-2009, 10:06 PM

hmm, i wonder there that long spring goes? I'm thinking about it. I've got some moneys hanging over on paypal.

Jim_PA · 08-25-2009, 10:09 PM

I've seen it in pictures when used in a blazer, I think?

jsmithbm · 08-25-2009, 10:12 PM

i think i am going to pass Jim, i also need a brake booster and portional valve. I would like to have an original jack setup. If you dont have it sold in a few weeks send me a pm.

Jim_PA · 08-25-2009, 10:13 PM

Here's the thread. Looks like that big spring I pictured is for a blazer. Let me go out and see if I have the correct spring for trucks.

http://67-72chevytrucks.com/vboard/s...d.php?t=332278

Jim_PA · 08-25-2009, 10:16 PM

I have the retaining spring that goes behind the door jamb.

I believe the only thing missing is the floor bracket, the spring for the floor bracket, and the bag for the crank and handle.

ckexswb · 08-25-2009, 10:29 PM

If $40 shipped to 90277 count me in. Paypal

**LockDoc** · 08-26-2009, 08:50 PM

Quote:

Originally Posted by Jim_PA

Here's the thread. Looks like that big spring I pictured is for a blazer. Let me go out and see if I have the correct spring for trucks.

http://67-72chevytrucks.com/vboard/s...d.php?t=332278

I can't prove it but I think the long spring was used on some 67's and the jack was mounted under the seat with it...

LockDoc

Jim_PA · 08-26-2009, 10:54 PM

Quote:

Originally Posted by LockDoc

I can't prove it but I think the long spring was used on some 67's and the jack was mounted under the seat with it...

LockDoc

The truck I got this jack out of had the jack mount bracket and small spring on the floor next to the gas tank like many others I've seen.

What's interesting is --- this truck didn't have the hole drilled in the passenger side door jamb for the jack handle/lug tool spring (the one that goes in the dead space behind the door jamb...) The recess isn't even there for the hole like my 68 or 72 cabs...

Looks like this truck never came with the retaining spring for the handle and lug tool behind the door jamb. That long spring must be for this style of jack setup, but I don't really have any way of knowing where.

Jim_PA · 08-26-2009, 10:59 PM

Glad I still have this pic... Notice there is no place for the spring to be bolted to this door jamb. but you can clearly see the bracket on the floor with the small spring for the jack.

**too much stuff** · 08-26-2009, 11:23 PM

Quote:

Originally Posted by LockDoc

I can't prove it but I think the long spring was used on some 67's and the jack was mounted under the seat with it...

LockDoc

I have to agree with that...

Jim_PA · 08-26-2009, 11:34 PM

Quote:

Originally Posted by too much stuff

I have to agree with that...

I'm starting to think the price of my seemingly "67-only" ultra-rare jack setup is way too low

Jim_PA · 09-01-2009, 11:36 PM

still for sale

Jim_PA · 09-02-2009, 10:36 AM

$30 + shipping.

bean · 09-02-2009, 11:11 AM

how much would shipping be to temple, tx 76504? thanks.

Jim_PA · 09-02-2009, 12:02 PM

Quote:

Originally Posted by bean

how much would shipping be to temple, tx 76504? thanks.

$13 for parcel post

$19 for priority mail

**michael bustamante** · 09-02-2009, 07:13 PM

that is a 67 only spring to hold the jack under the seat. theres also a bracket that bolts next to the passenger seat belt (buckle side) that has a u shaped cut out on it that shares a bolt with the gas tank. Ive only seen this set up in a 67.

Jim_PA · 09-09-2009, 12:46 PM

Still for sale

bestchevyfan · 09-09-2009, 01:53 PM

Jim, i will take it . Shipping to 35816 a busness address. Amount for paypal. Thanks,buddy

08-22-2009, 11:57 PM	#1
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Jack, crank, lug tool, and a long (hold-down?) spring out of a '67 I've seen others claiming this design is orignal, but I still don't have any way of knowing for sure, other than it did come out of a 67 C10: PRICE CUT! $30 + shipping Last edited by Jim_PA; 09-02-2009 at 10:36 AM.

08-24-2009, 11:16 PM	#2
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Re: Jack, crank, lug tool, and a long (hold-down?) spring out of a '67 This is cheaper than AAA service!

08-25-2009, 09:03 PM	#3
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Re: Jack, crank, lug tool, and a long (hold-down?) spring out of a '67 any takers?

08-25-2009, 09:09 PM	#4
jsmithbm Registered User Join Date: Jun 2009 Location: Newnan, GA Posts: 485	Re: Jack, crank, lug tool, and a long (hold-down?) spring out of a '67 how much is shipping to 30297? __________________ Learning as I go! -------------------------------------

08-25-2009, 10:03 PM	#5
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Re: Jack, crank, lug tool, and a long (hold-down?) spring out of a '67 $8

08-25-2009, 10:06 PM	#6
jsmithbm Registered User Join Date: Jun 2009 Location: Newnan, GA Posts: 485	Re: Jack, crank, lug tool, and a long (hold-down?) spring out of a '67 hmm, i wonder there that long spring goes? I'm thinking about it. I've got some moneys hanging over on paypal. __________________ Learning as I go! -------------------------------------

08-25-2009, 10:09 PM	#7
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Re: Jack, crank, lug tool, and a long (hold-down?) spring out of a '67 I've seen it in pictures when used in a blazer, I think?

08-25-2009, 10:12 PM	#8
jsmithbm Registered User Join Date: Jun 2009 Location: Newnan, GA Posts: 485	Re: Jack, crank, lug tool, and a long (hold-down?) spring out of a '67 i think i am going to pass Jim, i also need a brake booster and portional valve. I would like to have an original jack setup. If you dont have it sold in a few weeks send me a pm. __________________ Learning as I go! -------------------------------------

08-25-2009, 10:13 PM	#9
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Re: Jack, crank, lug tool, and a long (hold-down?) spring out of a '67 Here's the thread. Looks like that big spring I pictured is for a blazer. Let me go out and see if I have the correct spring for trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=332278 Last edited by Jim_PA; 08-25-2009 at 10:13 PM.

08-25-2009, 10:16 PM	#10
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Re: Jack, crank, lug tool, and a long (hold-down?) spring out of a '67 I have the retaining spring that goes behind the door jamb. I believe the only thing missing is the floor bracket, the spring for the floor bracket, and the bag for the crank and handle.

08-25-2009, 10:29 PM	#11
ckexswb 67-72=-5 Join Date: Jun 2007 Location: calif/ beach Posts: 807	Re: Jack, crank, lug tool, and a long (hold-down?) spring out of a '67 If $40 shipped to 90277 count me in. Paypal

08-26-2009, 10:59 PM	#14
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Re: Jack, crank, lug tool, and a long (hold-down?) spring out of a '67 Glad I still have this pic... Notice there is no place for the spring to be bolted to this door jamb. but you can clearly see the bracket on the floor with the small spring for the jack. Last edited by Jim_PA; 08-26-2009 at 11:00 PM.

09-01-2009, 11:36 PM	#17
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Re: Jack, crank, lug tool, and a long (hold-down?) spring out of a '67 still for sale

09-02-2009, 10:36 AM	#18
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Re: Jack, crank, lug tool, and a long (hold-down?) spring out of a '67 $30 + shipping.

09-02-2009, 11:11 AM	#19
bean Registered User Join Date: Jun 2002 Location: Fort Worth, TX Posts: 920	Re: Jack, crank, lug tool, and a long (hold-down?) spring out of a '67 how much would shipping be to temple, tx 76504? thanks.



Register or Log In To remove these advertisements.

09-02-2009, 07:13 PM	#21
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: Jack, crank, lug tool, and a long (hold-down?) spring out of a '67 that is a 67 only spring to hold the jack under the seat. theres also a bracket that bolts next to the passenger seat belt (buckle side) that has a u shaped cut out on it that shares a bolt with the gas tank. Ive only seen this set up in a 67. __________________ 1967custom Last edited by michael bustamante; 09-02-2009 at 07:14 PM.

09-09-2009, 12:46 PM	#22
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Re: Jack, crank, lug tool, and a long (hold-down?) spring out of a '67 Still for sale

09-09-2009, 01:53 PM	#23
bestchevyfan Registered User Join Date: Jun 2002 Location: new market, alabama Posts: 1,330	Re: Jack, crank, lug tool, and a long (hold-down?) spring out of a '67 Jim, i will take it . Shipping to 35816 a busness address. Amount for paypal. Thanks,buddy

Register or Log In To remove these advertisements.