Washer and bolt for the fender - The 1947 - Present Chevrolet & GMC Truck Message Board Network

djw32 · 09-09-2009, 06:17 PM

Where can I find the part number for the bolt and washer, the washer is about 1" in diameter, and the bolt has a point at the start and then works into the threads, that is the last one on the fender that goes through the frame( imagine that you're looking at the truck from the front)? I am missing the one bolt and washer on the passenger side.

David

I can post a picture on friday if need be.

Longhorn Man · 09-09-2009, 10:49 PM

why not go to the junk yard?
I doubt you'll ever find one at the dealer.

**leddzepp** · 09-09-2009, 10:57 PM

Become a subscribing member, post a WTB (want to buy) ad and I'll bet someone would be willing to send you a couple for the cost of postage.

**LockDoc** · 09-09-2009, 11:33 PM

-
If this is what you need the washer is closer to 2". It goes in the larger square hole in the rear of the inner fender panel.

After reading your post a couple more times I'm thinking that's not the one you need....

LockDoc

djw32 · 09-10-2009, 12:20 AM

Lock Doc,
That is the bolt and washer I need.

2"...1"...washer...I was going off of memory.

djw32 · 09-10-2009, 12:22 AM

Quote:

Originally Posted by Longhorn Man

why not go to the junk yard?
I doubt you'll ever find one at the dealer.

Southern California does not have junk yards full of 67-72 chevy truck. I was hoping that this bolt and washer would also be used on the 73-87 c-10.

**leddzepp** · 09-10-2009, 12:24 AM

Where are you at in So Cali? I might be able to point you in the right direction...

djw32 · 09-10-2009, 12:39 AM

I live in Brea

**leddzepp** · 09-10-2009, 12:43 AM

www.kingstrucks.com

Jeremiah is also a board member. He is located in Escondildo, and has lots of OEM 67-72 truck parts. I have purchased stuff from him in the past, and he is good people. His contact info is on his website.

djw32 · 09-10-2009, 12:50 AM

Quote:

Originally Posted by leddzepp

www.kingstrucks.com

Jeremiah is also a board member. He is located in Escondildo, and has lots of OEM 67-72 truck parts. I have purchased stuff from him in the past, and he is good people. His contact info is on his website.

Thank you, Sir.

09-09-2009, 06:17 PM	#1
djw32 Registered User Join Date: May 2006 Location: So.Cal Posts: 542	Washer and bolt for the fender Where can I find the part number for the bolt and washer, the washer is about 1" in diameter, and the bolt has a point at the start and then works into the threads, that is the last one on the fender that goes through the frame( imagine that you're looking at the truck from the front)? I am missing the one bolt and washer on the passenger side. David I can post a picture on friday if need be. Last edited by djw32; 09-09-2009 at 06:20 PM.

09-09-2009, 10:49 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Washer and bolt for the fender why not go to the junk yard? I doubt you'll ever find one at the dealer.

09-09-2009, 10:57 PM	#3
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,001	Re: Washer and bolt for the fender Become a subscribing member, post a WTB (want to buy) ad and I'll bet someone would be willing to send you a couple for the cost of postage. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

09-09-2009, 11:33 PM	#4
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,465	Re: Washer and bolt for the fender - If this is what you need the washer is closer to 2". It goes in the larger square hole in the rear of the inner fender panel. After reading your post a couple more times I'm thinking that's not the one you need.... LockDoc Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; 09-09-2009 at 11:36 PM.

09-10-2009, 12:20 AM	#5
djw32 Registered User Join Date: May 2006 Location: So.Cal Posts: 542	Re: Washer and bolt for the fender Lock Doc, That is the bolt and washer I need. 2"...1"...washer...I was going off of memory.

09-10-2009, 12:24 AM	#7
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,001	Re: Washer and bolt for the fender Where are you at in So Cali? I might be able to point you in the right direction... __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

09-10-2009, 12:39 AM	#8
djw32 Registered User Join Date: May 2006 Location: So.Cal Posts: 542	Re: Washer and bolt for the fender I live in Brea Last edited by djw32; 09-10-2009 at 12:49 AM.

09-10-2009, 12:43 AM	#9
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,001	Re: Washer and bolt for the fender www.kingstrucks.com Jeremiah is also a board member. He is located in Escondildo, and has lots of OEM 67-72 truck parts. I have purchased stuff from him in the past, and he is good people. His contact info is on his website. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.