Got a hold of a REAL camera! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67chevemall · 09-04-2009, 10:40 AM

13 years of blood sweat and tears.......

CG · 09-04-2009, 11:01 AM

Looks great. I like the chopped look on stepsides, but they dont really work for me as much on a fleetside. What is the final color going to be?

long69 · 09-04-2009, 02:21 PM

i like it. especially after i saw one driving down the road. i wish i wasn't tall so i could at least consider it.

72BlckButy · 09-04-2009, 02:38 PM

Nice work!

**70cst** · 09-04-2009, 03:06 PM

Quote:

Originally Posted by CG

Looks great. I like the chopped look on stepsides, but they dont really work for me as much on a fleetside. What is the final color going to be?

Very Impressive.

big_al_71 · 09-04-2009, 03:20 PM

Cool looking truck!!!

67chevemall · 09-04-2009, 03:36 PM

Thanks guys! Board has been awsome too.
Still have the front air bags to install to level it.
Vent windows have to be rebuilt with tempered so I can put the chrome locks on it.
Need a headliner and rubber floor mat

I love Flat Black and paint just about everything from my lawnmower to my fridge
The truck was Grabber Blue for a few years.
I am into the DARK Metallic rootbeer look I have seen at a few shows

Then its off to Barrette Jackson

Longhorn Man · 09-04-2009, 04:10 PM

a flat black mower and fridge... now THAT is dedication!
I like your style

OARNGESI · 09-04-2009, 08:08 PM

Really nice truck

JoeKan · 09-04-2009, 08:11 PM

thatsanica!!

**kev2809** · 09-04-2009, 08:51 PM

nice truck, any pics of the fridge and lawnmower?

did you mold your rollpan to your fenders?

FRENCHBLUE72 · 09-04-2009, 08:52 PM

Very nice .......

prostreetC-10 · 09-04-2009, 09:56 PM

Can't beat that front end and the flat black. It looks really tough. I think it would be cool if someone photoshop'd another 2 or so inches off the stance to see how that would look.

Those tires have like zero sidewall. What " is the wheels?

BCOWANWHEELS · 09-04-2009, 10:45 PM

Need to lower it 2-3 inches more

Richard8971 · 09-05-2009, 12:03 AM

I love the chopped top and stepside... damn... I may need to chop the top on mine!

D

jojo · 09-05-2009, 12:15 AM

my eyes are playing tricks on me I thought it said "13 years of blood sweat and beers" !!

sweet truck. maybe it's the roll pan or the chopped top but the rear fenders look wider than normal.

**mr48chev** · 09-05-2009, 12:22 AM

It looks good but the back end of the bed looks a bit droopy llke it needs to come up about an inch or so to keep the line of the bed rail parallel with the style line on the cab. it looks like the frame got bent the way it sits.

I can't get used to those skinny little tires on a truck but that's just me.

67chevemall · 09-06-2009, 09:38 AM

Quote:

Originally Posted by mr48chev

It looks good but the back end of the bed looks a bit droopy llke it needs to come up about an inch or so to keep the line of the bed rail parallel with the style line on the cab. it looks like the frame got bent the way it sits.

Yep I just put the rear bags in and they drop another 2-3 or more inches
I just cant because the front bags are not in yet.......chopped springs rest in the front right now.

I can't get used to those skinny little tires on a truck but that's just me.

Yep I just put the rear bags in and they drop another 2-3 or more inches
I just cant because the front bags are not in yet.......chopped springs rest in the front right now.

I have another set ready for pink slip kills.
1970's Pro Trac 50's on the back and M/t 10X26" tires up front....This is the set up I like on it. The Chromes are to piss off the ex wife and car shows.......

prostreetC-10 · 09-06-2009, 09:50 AM

Make sure and post pics when you get the front down with the back. That will be neat to see!

allen123 · 09-06-2009, 12:37 PM

Sick truck! gotta love flat black its my favorite too

Lated · 09-06-2009, 01:52 PM

How much chop did you do? I'm wanting to drop mine to right above the pivot for the vent windows. Something like this rough paint chop I did awhile back. What kind of seat do you have in your truck? I picked up a set of 4th-gen Camaro buckets that I think will let me do about a 7-8" chop (I'm 6').

67chevemall · 09-08-2009, 03:47 PM

4"
1992 Acrura Integra seats
Only have to bend the front track 90' for them to fit

67chevemall · 09-11-2009, 04:48 PM

Couple more pics

09-04-2009, 10:40 AM	#1
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	Got a hold of a REAL camera! 13 years of blood sweat and tears....... __________________ 1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD Last edited by 67chevemall; 07-09-2010 at 02:26 PM.

09-04-2009, 11:01 AM	#2
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 20,021	Re: Got a hold of a REAL camera! Looks great. I like the chopped look on stepsides, but they dont really work for me as much on a fleetside. What is the final color going to be?

09-04-2009, 02:21 PM	#3
long69 Registered User Join Date: Oct 2006 Location: lost angeles Posts: 159	Re: Got a hold of a REAL camera! i like it. especially after i saw one driving down the road. i wish i wasn't tall so i could at least consider it.

09-04-2009, 02:38 PM	#4
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Got a hold of a REAL camera! Nice work! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

09-04-2009, 03:20 PM	#6
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Got a hold of a REAL camera! Cool looking truck!!! __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

09-04-2009, 03:36 PM	#7
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	Re: Got a hold of a REAL camera! Thanks guys! Board has been awsome too. Still have the front air bags to install to level it. Vent windows have to be rebuilt with tempered so I can put the chrome locks on it. Need a headliner and rubber floor mat I love Flat Black and paint just about everything from my lawnmower to my fridge The truck was Grabber Blue for a few years. I am into the DARK Metallic rootbeer look I have seen at a few shows Then its off to Barrette Jackson __________________ 1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD

09-04-2009, 04:10 PM	#8
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Got a hold of a REAL camera! a flat black mower and fridge... now THAT is dedication! I like your style

09-04-2009, 08:08 PM	#9
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: Got a hold of a REAL camera! Really nice truck __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

09-04-2009, 08:11 PM	#10
JoeKan Registered User Join Date: Jul 2008 Location: Kansas Posts: 707	Re: Got a hold of a REAL camera! thatsanica!!

09-04-2009, 08:51 PM	#11
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: Got a hold of a REAL camera! nice truck, any pics of the fridge and lawnmower? did you mold your rollpan to your fenders? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

09-04-2009, 08:52 PM	#12
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Got a hold of a REAL camera! Very nice ....... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-04-2009, 09:56 PM	#13
prostreetC-10 My Carbon Footprint Join Date: Oct 2008 Location: Orygun Posts: 5,527	Re: Got a hold of a REAL camera! Can't beat that front end and the flat black. It looks really tough. I think it would be cool if someone photoshop'd another 2 or so inches off the stance to see how that would look. Those tires have like zero sidewall. What " is the wheels? __________________ A quick "pedalfest" *Still getting loose (carb test)* 496 Initial fire up video! Last edited by prostreetC-10; 09-04-2009 at 09:57 PM.

09-04-2009, 10:45 PM	#14
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: Got a hold of a REAL camera! Need to lower it 2-3 inches more __________________ I BELIEVE IN JOHN 3:16

09-05-2009, 12:03 AM	#15
Richard8971 Still livin the "dream" in '54 Join Date: Nov 2006 Location: Tucson, AZ Posts: 2,656	Re: Got a hold of a REAL camera! I love the chopped top and stepside... damn... I may need to chop the top on mine! D __________________ Current build. 1954 Chevrolet 3800 "Ella" SOLD! My '67 stepper "Tangerine Dream" "Anything worth doing is worth doing right" James Dean “When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth.” Sherlock Holmes "There is no spoon." Neo

09-05-2009, 12:15 AM	#16
jojo printing is my trade Join Date: May 2009 Location: San Antonio, Texas Posts: 349	Re: Got a hold of a REAL camera! my eyes are playing tricks on me I thought it said "13 years of blood sweat and beers" !! sweet truck. maybe it's the roll pan or the chopped top but the rear fenders look wider than normal. __________________ Jojo's '70 stepside build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=344184



Register or Log In To remove these advertisements.

09-05-2009, 12:22 AM	#17
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,708	Re: Got a hold of a REAL camera! It looks good but the back end of the bed looks a bit droopy llke it needs to come up about an inch or so to keep the line of the bed rail parallel with the style line on the cab. it looks like the frame got bent the way it sits. I can't get used to those skinny little tires on a truck but that's just me.

09-06-2009, 09:50 AM	#19
prostreetC-10 My Carbon Footprint Join Date: Oct 2008 Location: Orygun Posts: 5,527	Re: Got a hold of a REAL camera! Make sure and post pics when you get the front down with the back. That will be neat to see! __________________ A quick "pedalfest" *Still getting loose (carb test)* 496 Initial fire up video!

09-06-2009, 12:37 PM	#20
allen123 It'll buff out Join Date: Mar 2008 Location: Blanchard,Ok Posts: 1,376	Re: Got a hold of a REAL camera! Sick truck! gotta love flat black its my favorite too __________________ 1972 Chevy c10 swb 2008 CBR600RR Grafitti edition My Build Cody Allen

09-06-2009, 01:52 PM	#21
Lated Registered User Join Date: Feb 2007 Location: Colorado Posts: 255	Re: Got a hold of a REAL camera! How much chop did you do? I'm wanting to drop mine to right above the pivot for the vent windows. Something like this rough paint chop I did awhile back. What kind of seat do you have in your truck? I picked up a set of 4th-gen Camaro buckets that I think will let me do about a 7-8" chop (I'm 6'). Attached Images __________________ “If you don’t have time to do it right now, how will you ever find time to fix it.” - author unknown '70 SWB Step-Side (More rust than metal)

09-08-2009, 03:47 PM	#22
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	Re: Got a hold of a REAL camera! 4" 1992 Acrura Integra seats Only have to bend the front track 90' for them to fit __________________ 1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD

09-11-2009, 04:48 PM	#23
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	Re: Got a hold of a REAL camera! Couple more pics __________________ 1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD Last edited by 67chevemall; 07-09-2010 at 02:26 PM.

Register or Log In To remove these advertisements.