Parting out 69 GMC 3/4 ton AZ - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ERASER5 · 08-18-2009, 09:24 PM

So that's $60 for the hitch then. PM sent.

BIG69GMC · 08-19-2009, 05:03 PM

Hello! does it got a spare or how much for just one wheel? my zip is 87031
Thx!!!

07lbz2500 · 08-20-2009, 06:21 PM

Did you happen to check if those leafs are 2.5" wide.

Marshall S · 08-25-2009, 09:14 PM

Are you also selling the fenders? If so is the right one in good condition or rusted through in the usual spot? If shipping is possible, how much to 97321?
Thanks

ERASER5 · 08-27-2009, 01:10 AM

What kind of bumper was on the truck? I did a rough placement test and my bumper brackets are in the way. I'll need to modify something. I may just be able to move the bumper up a bit. We will see.

Gearhead dude · 08-27-2009, 11:24 PM

I'm interested in the engine/headlight harness if still available. Shipped to 77479.

**t korinek** · 08-28-2009, 02:58 AM

eraser5 it had a chrome step bumper on it, I still have it.
Gearhead dude harness's are sold
Marshall S Passenger fender in good shape, not rusted out $125 shipped
07lbz2500 leaf springs are 2 3/8" wide
big69GMC I don't have any wheels without tires right now & it would cost too much to ship them both.

Gearhead dude · 08-28-2009, 08:11 AM

Thanks for the quick reply.

Hammer500 · 08-28-2009, 11:01 AM

How much for the door panels, headliner, and mirror cover shipped to Canada, postal code
T2Z 4S6?

ERASER5 · 08-29-2009, 02:02 AM

I went back and studied the hitch and bumper photos. The problem is my brackets. Small problem since the bumper is shot anyway.

*mickeymouse* · 08-29-2009, 07:51 AM

Driver's side fender?

Hammer500 · 09-01-2009, 09:17 AM

Hi. If you don't Ship to Canada how much would the door panels, headliner and mirror cover be shipped to 59484?

ERASER5 · 09-01-2009, 10:18 PM

Quote:

Originally Posted by t korinek

eraser5 it had a chrome step bumper on it, I still have it.

Yes, I think I might want the bumper, however, you said no shipping. So are you firm on that?

HarrisonTX · 09-07-2009, 06:43 AM

The front disc brake parts.
Is this everything i need to change from front drum brakes on my 3/4 ton chevy?

**t korinek** · 09-10-2009, 03:26 AM

harrisonTX I have everything needed on this truck for a disk brake conversion, these parts are heavy & shipping will be expensive

Hammer500 heres pics of the arm rests & door chrome, there are 2 hairline cracks on one of the armrests $10 for the pair & the door chrome has some bubbling on the chrome but it is not seen when installed $20 for both

mickeymouse, driver fender not worth shipping

**t korinek** · 09-10-2009, 03:27 AM

pics of the armrest with cracks

2000tj · 09-10-2009, 10:08 PM

How is the tailgate? How much shipped to 28806?

monte0185 · 09-11-2009, 01:55 PM

how much for all the rear spring perches shipped to 38011?

**t korinek** · 09-12-2009, 01:39 AM

2000tj
This gate is sraight, but rusted bad, I have another that I'll have to get pics of please give me a few days.

monte0185 $65 shipped for all the rear perches

2000tj · 09-12-2009, 02:58 AM

Thanks, I am not in big hurry.

BIGCHEVYMAN · 09-12-2009, 01:53 PM

how much for the cab? thanks

08-18-2009, 09:24 PM	#51
ERASER5 Registered User Join Date: Jun 2006 Location: Indiana Posts: 4,859	Re: Parting out 69 GMC 3/4 ton AZ So that's $60 for the hitch then. PM sent. __________________ '70 GMC C1500 LWB Power disc brakes. WooHoo! Posi 6 Lug Dana 60

08-19-2009, 05:03 PM	#52
BIG69GMC Registered User Join Date: Jul 2009 Location: Albuquerque, NM Posts: 101	Re: Parting out 69 GMC 3/4 ton AZ Hello! does it got a spare or how much for just one wheel? my zip is 87031 Thx!!!

08-20-2009, 06:21 PM	#53
07lbz2500 Registered User Join Date: May 2008 Location: pittsburgh. PA Posts: 13	Re: Parting out 69 GMC 3/4 ton AZ Did you happen to check if those leafs are 2.5" wide.

08-25-2009, 09:14 PM	#54
Marshall S Registered User Join Date: Sep 2007 Location: Albany, OR Posts: 5	Re: Parting out 69 GMC 3/4 ton AZ Are you also selling the fenders? If so is the right one in good condition or rusted through in the usual spot? If shipping is possible, how much to 97321? Thanks

08-27-2009, 01:10 AM	#55
ERASER5 Registered User Join Date: Jun 2006 Location: Indiana Posts: 4,859	Re: Parting out 69 GMC 3/4 ton AZ What kind of bumper was on the truck? I did a rough placement test and my bumper brackets are in the way. I'll need to modify something. I may just be able to move the bumper up a bit. We will see. __________________ '70 GMC C1500 LWB Power disc brakes. WooHoo! Posi 6 Lug Dana 60

08-27-2009, 11:24 PM	#56
Gearhead dude Registered User Join Date: Feb 2009 Location: Sugar Land, TX Posts: 102	Re: Parting out 69 GMC 3/4 ton AZ I'm interested in the engine/headlight harness if still available. Shipped to 77479.

08-28-2009, 02:58 AM	#57
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	Re: Parting out 69 GMC 3/4 ton AZ eraser5 it had a chrome step bumper on it, I still have it. Gearhead dude harness's are sold Marshall S Passenger fender in good shape, not rusted out $125 shipped 07lbz2500 leaf springs are 2 3/8" wide big69GMC I don't have any wheels without tires right now & it would cost too much to ship them both. __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

08-28-2009, 08:11 AM	#58
Gearhead dude Registered User Join Date: Feb 2009 Location: Sugar Land, TX Posts: 102	Re: Parting out 69 GMC 3/4 ton AZ Thanks for the quick reply.

08-28-2009, 11:01 AM	#59
Hammer500 Registered User Join Date: May 2009 Location: Calgary, Alberta Posts: 115	Re: Parting out 69 GMC 3/4 ton AZ How much for the door panels, headliner, and mirror cover shipped to Canada, postal code T2Z 4S6? __________________ 69 Chev C/10 350/200 4R LWB 69 Chev K/20 4x4 350/4sp LWB 69 GMC Sierra Grande 396/400 LWB

08-29-2009, 02:02 AM	#60
ERASER5 Registered User Join Date: Jun 2006 Location: Indiana Posts: 4,859	Re: Parting out 69 GMC 3/4 ton AZ I went back and studied the hitch and bumper photos. The problem is my brackets. Small problem since the bumper is shot anyway. __________________ '70 GMC C1500 LWB Power disc brakes. WooHoo! Posi 6 Lug Dana 60

08-29-2009, 07:51 AM	#61
mickeymouse Account Suspended Join Date: Nov 2005 Location: Where ever the Navy sends me. Posts: 116	Re: Parting out 69 GMC 3/4 ton AZ Driver's side fender?

09-01-2009, 09:17 AM	#62
Hammer500 Registered User Join Date: May 2009 Location: Calgary, Alberta Posts: 115	Re: Parting out 69 GMC 3/4 ton AZ Hi. If you don't Ship to Canada how much would the door panels, headliner and mirror cover be shipped to 59484? __________________ 69 Chev C/10 350/200 4R LWB 69 Chev K/20 4x4 350/4sp LWB 69 GMC Sierra Grande 396/400 LWB

09-07-2009, 06:43 AM	#64
HarrisonTX Registered User Join Date: Nov 2003 Location: Waco TX Posts: 247	Re: Parting out 69 GMC 3/4 ton AZ The front disc brake parts. Is this everything i need to change from front drum brakes on my 3/4 ton chevy? __________________ '69 custom/camper '74 260z 302 chevy/tko500 swap in progrss '79 Malibu 355 all forged 4 speed car. '86 k5 blazer '06 Duramax

09-10-2009, 03:26 AM	#65
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	Re: Parting out 69 GMC 3/4 ton AZ harrisonTX I have everything needed on this truck for a disk brake conversion, these parts are heavy & shipping will be expensive Hammer500 heres pics of the arm rests & door chrome, there are 2 hairline cracks on one of the armrests $10 for the pair & the door chrome has some bubbling on the chrome but it is not seen when installed $20 for both mickeymouse, driver fender not worth shipping Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

09-10-2009, 03:27 AM	#66
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	Re: Parting out 69 GMC 3/4 ton AZ pics of the armrest with cracks Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!



Register or Log In To remove these advertisements.

09-10-2009, 10:08 PM	#67
2000tj Registered User Join Date: Jul 2009 Location: Wellington, CO Posts: 108	Re: Parting out 69 GMC 3/4 ton AZ How is the tailgate? How much shipped to 28806?

09-11-2009, 01:55 PM	#68
monte0185 Registered User Join Date: Oct 2008 Location: Brighton, TN Posts: 1,267	Re: Parting out 69 GMC 3/4 ton AZ how much for all the rear spring perches shipped to 38011? __________________ A computer once beat me at chess, but it was no match for me at kick boxing. Duct tape is like the force. It has a light side, a dark side, and it holds the world together.

09-12-2009, 01:39 AM	#69
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	Re: Parting out 69 GMC 3/4 ton AZ 2000tj This gate is sraight, but rusted bad, I have another that I'll have to get pics of please give me a few days. monte0185 $65 shipped for all the rear perches __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

09-12-2009, 02:58 AM	#70
2000tj Registered User Join Date: Jul 2009 Location: Wellington, CO Posts: 108	Re: Parting out 69 GMC 3/4 ton AZ Thanks, I am not in big hurry.

09-12-2009, 01:53 PM	#71
BIGCHEVYMAN Senior Member Join Date: Apr 2002 Location: Portland , Tennessee , United States Posts: 1,024	Re: Parting out 69 GMC 3/4 ton AZ how much for the cab? thanks

Register or Log In To remove these advertisements.