The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-19-2009, 11:34 PM   #1
xbanone
Registered User
 
xbanone's Avatar
 
Join Date: Oct 2008
Location: WV
Posts: 209
Hard to find parts

I have a '76 GMC K15. There are a few parts for the 73-76/77's that are hard to find, I wanted to see if you all can help. I am mostly looking for interior parts and grilles.

I have a set of doors off an '81 C10 that I want to use. So which year door panels should I look for?

I also need a dash bezel, i would like to use a silver faced one like the '81 and up silverados used.

Lastly, I would like a grille in better shape. I want to stay GMC and with the 73-80 front end. I also have the external hood release.

I have a plethora of 81-87 parts but nothing for the 80 and down, I have checked all the usual places like LMC and Classicparts. Any other ideas?

Thanks
Brady
__________________
1976 K15 Short/Step
1981 C10 short/wide
1994 K1500 ECSB
xbanone is offline   Reply With Quote
Old 09-19-2009, 11:47 PM   #2
f.monroe
Senior Member
 
f.monroe's Avatar
 
Join Date: May 2004
Location: Caldwell,Tx.
Posts: 3,648
Re: Hard to find parts

81 doors are basically 77-87 doors with a few exceptions like glass thickness and the inside door handle itself so thos years would work for door panels . Dash panel had bright trim on the face of Cheyenne and Silverado models and the 78-80 dash bezel will work with the correct year dash pad . 81 and 82 will work but will require an 81/82 dash pad . The grilles can be had in good used condition . I dont think the aftermarket makes GMC grilles .
Frank
__________________
Born and proudly residing in a Red State !
f.monroe is offline   Reply With Quote
Old 09-20-2009, 04:28 PM   #3
old Rusty C10
Robert Olson Transport
 
old Rusty C10's Avatar
 
Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,313
Re: Hard to find parts

have you tried our site vendors like captkaos or tri-pro automotive?
__________________
Bob



1951 International running on a squarebody chassis


"If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board"
http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!)


PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport

Live each day to the fullest.. you never know when fate is going to pull the rug out from under you...
I hate cancer!!
old Rusty C10 is offline   Reply With Quote
Old 09-20-2009, 05:29 PM   #4
LONGHAIR
just can't cover up my redneck
 
Join Date: May 2004
Location: Columbus OH
Posts: 11,414
Re: Hard to find parts

Please keep this in a "vendor/supplier" range.
If this turns toward a "want to buy" or poeple start making offers to "sell" this thread will be locked and edited (or removed)

Keep it with-in the rules.
__________________
You can review the site's rules here.



Quote:
Originally Posted by Longhorn Man View Post
As for reading directions...
The directions are nothing but another man's opinion.
Learn from the mistakes of others, you won't live long enough to make them all yourself...

Bad planning on your part does not necessarily constitute an instant emergency on my part....

The great thing about being a pessimist is that you are either pleasantly surprised or right.
LONGHAIR is offline   Reply With Quote
Old 09-20-2009, 10:30 PM   #5
xbanone
Registered User
 
xbanone's Avatar
 
Join Date: Oct 2008
Location: WV
Posts: 209
Re: Hard to find parts

Quote:
Originally Posted by LONGHAIR View Post
Please keep this in a "vendor/supplier" range.
If this turns toward a "want to buy" or poeple start making offers to "sell" this thread will be locked and edited (or removed)

Keep it with-in the rules.
Longhair,

Sorry if my post seams like a wtb, but I'm really just looking for some ideas of the correct years to pull parts from. Most of what I see at vendors exclude alot of the early 73-76 GMC specific parts, I need to know what other years will work. I just need some one to point me in the right direction
__________________
1976 K15 Short/Step
1981 C10 short/wide
1994 K1500 ECSB
xbanone is offline   Reply With Quote
Old 09-21-2009, 12:19 AM   #6
KQQL IT
At the body shop.
 
KQQL IT's Avatar
 
Join Date: Aug 2009
Location: Land of fruits and nuts.
Posts: 5,260
Re: Hard to find parts

Man i know the feeling i looked fora 73/74 gmc grille for some time gave up got a 73 chevy grille
KQQL IT is offline   Reply With Quote
Old 09-21-2009, 12:29 AM   #7
KQQL IT
At the body shop.
 
KQQL IT's Avatar
 
Join Date: Aug 2009
Location: Land of fruits and nuts.
Posts: 5,260
Smile Re: Hard to find parts

Quote:
Originally Posted by KQQL IT View Post
Man i know the feeling i looked fora 73/74 gmc grille for some time gave up got a 73 chevy grille
After *****in about it i look on flea bay and its the second item WTH... buyitnow rules
__________________
" That didnt make it any newer "
" Dont antique the equipment "

Last edited by KQQL IT; 09-21-2009 at 12:29 AM.
KQQL IT is offline   Reply With Quote
Old 09-21-2009, 12:42 AM   #8
xbanone
Registered User
 
xbanone's Avatar
 
Join Date: Oct 2008
Location: WV
Posts: 209
Re: Hard to find parts

Quote:
Originally Posted by KQQL IT View Post
After *****in about it i look on flea bay and its the second item WTH... buyitnow rules
Did you buy it? I didn't see one.

Quote:
Originally Posted by f.monroe View Post
81 doors are basically 77-87 doors with a few exceptions like glass thickness and the inside door handle itself so thos years would work for door panels . Dash panel had bright trim on the face of Cheyenne and Silverado models and the 78-80 dash bezel will work with the correct year dash pad . 81 and 82 will work but will require an 81/82 dash pad . The grilles can be had in good used condition . I dont think the aftermarket makes GMC grilles .
Frank
I did not know that about the thicker glass. I would assume that is a good thing. I have one question about your reply. I was looking @ 77-80 door panels and see different handles. What would I need to do to get them to work for me?

I have a set of cherry '81 doors with power that are going on the 81 C10. The doors that are currently on the C10 will come off and the guts will come out and go into some '86 blazer doors I have and go on the '76 K15. I think I need the 77-80 door panels for this one. (please correct me if I'm wrong on the fit). Is that confusing enough?

I found 77-80 dash panels @ brothers called blac/silver or balck/chrome. I am assuming that is the style I am after. What makes a instrument panel a 73-76 or 77-80?

Sorry about all the questions. You would think a body style that ran for 18 years would be easier than this.

Thanks
__________________
1976 K15 Short/Step
1981 C10 short/wide
1994 K1500 ECSB

Last edited by xbanone; 09-21-2009 at 12:44 AM.
xbanone is offline   Reply With Quote
Old 09-21-2009, 12:48 AM   #9
KQQL IT
At the body shop.
 
KQQL IT's Avatar
 
Join Date: Aug 2009
Location: Land of fruits and nuts.
Posts: 5,260
Re: Hard to find parts

Ya i bought it 44$ to my door . The gauge cluster if differnt by the oil pressure gauge the 77 and prior is mechanical i believe and maybe amp v.s volt gauge

Last edited by KQQL IT; 09-21-2009 at 12:49 AM.
KQQL IT is offline   Reply With Quote
Old 09-21-2009, 01:05 AM   #10
xbanone
Registered User
 
xbanone's Avatar
 
Join Date: Oct 2008
Location: WV
Posts: 209
Re: Hard to find parts

Quote:
Originally Posted by KQQL IT View Post
Ya i bought it 44$ to my door . The gauge cluster if differnt by the oil pressure gauge the 77 and prior is mechanical i believe and maybe amp v.s volt gauge
I know about the differences in the cluster but what about the bezel?
__________________
1976 K15 Short/Step
1981 C10 short/wide
1994 K1500 ECSB
xbanone is offline   Reply With Quote
Old 09-21-2009, 01:10 AM   #11
KQQL IT
At the body shop.
 
KQQL IT's Avatar
 
Join Date: Aug 2009
Location: Land of fruits and nuts.
Posts: 5,260
Re: Hard to find parts

I wish i had a answer for that im using 81 up interior and a 92 seat.
KQQL IT is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:32 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com