I am looking for a truck cover - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**sportsman712000** · 11-23-2008, 05:32 PM

I am wanting to buy my dad a cover for his 72 for Christmas. He just needs a lightweight one that has a good lining so it wont scratch his paint. Its gonna be in the garage so it will just be a dust cover really but i still wanna get him a decent fitting cover. Any ideas on where to get one? Thanks..Greg

lilred67 · 11-23-2008, 08:01 PM

i have a california car cover for mine.
i really like it.
www.californiacarcover.com

tinlid · 11-23-2008, 08:08 PM

2nd that on Beverly Hills Covers. Pricey but very nice.

cdowns · 11-23-2008, 08:43 PM

check out jc whitney they have a wide variety of quality carcovers at good prices

1968SWBBigBlock · 11-23-2008, 09:10 PM

2nd JC Whitney - I bought mine from them and I am very please with it

alexmadison · 09-26-2009, 04:42 PM

I found some decent ones from empire. This cover was a replacement cover for a custom cover that cost three times as much and started leaking water and collecting dust under the cover in less than a year. My Empire cover is 4 months old, has survived numerous strong thunderstorms and seering Texas sun, and so far is exceeding my expectations. I have 3 cars under cover, soon the other two will be covered by Empire.

http://empirecovers-review.blogspot.com/

mbgmike · 09-26-2009, 06:46 PM

Here are some of the ones we offer

all swb

http://www.covercraft.com/

custom fit $499.00
deluxe $175.00
Multi Bond $99.00
Poly cotton blend $125.00
Technalon $239.00

http://www.coverking.com/
Univeral CoverBond 4 $185.00
Coverguard $53.00
TriGuard $155.00
Tyvek $175.00

http://www.wolfautocovers.com/

Duralite $85.00
Evolution $189.00
Sentrex $89.00

Mike

unclewatts · 09-26-2009, 11:11 PM

I gotta Wolf and I'm pretty happy with it.

11-23-2008, 05:32 PM	#1
sportsman712000 Registered User Join Date: Aug 2008 Location: Hazel Green AL Posts: 27	I am looking for a truck cover I am wanting to buy my dad a cover for his 72 for Christmas. He just needs a lightweight one that has a good lining so it wont scratch his paint. Its gonna be in the garage so it will just be a dust cover really but i still wanna get him a decent fitting cover. Any ideas on where to get one? Thanks..Greg

11-23-2008, 08:01 PM	#2
lilred67 Senior Member Join Date: Mar 2005 Location: weatherford,texas Posts: 1,003	Re: I am looking for a truck cover i have a california car cover for mine. i really like it. www.californiacarcover.com

11-23-2008, 08:08 PM	#3
tinlid Registered User Join Date: Nov 2008 Location: Englewood, CO Posts: 95	Re: I am looking for a truck cover 2nd that on Beverly Hills Covers. Pricey but very nice.

11-23-2008, 08:43 PM	#4
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: I am looking for a truck cover check out jc whitney they have a wide variety of quality carcovers at good prices __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY Last edited by cdowns; 11-23-2008 at 08:45 PM.

11-23-2008, 09:10 PM	#5
1968SWBBigBlock Active Member Join Date: Oct 2006 Location: Ohio Posts: 1,643	Re: I am looking for a truck cover 2nd JC Whitney - I bought mine from them and I am very please with it __________________ 1968 SWB 454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts 781 heads Ported with 2.19/1.88 SSTvalves Lunati 60204 cam, Micro Trol lifters, Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition Holley 770 Street Avenger carb,Headers armor coated Built by Watson Ruppel Performance in Sarahsville Ohio. Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall 12 Bolt Eaton Posi 4.10 Richmond Gears moser axles 18.5" x 31" Hoosier Pro Street Radials ET Classic 5 Wheels - polished Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone) Custom Paint & Body Work Special thanks to my wife, my son and my money tree

09-26-2009, 04:42 PM	#6
alexmadison Registered User Join Date: Nov 2008 Location: corpus, tx Posts: 10	Re: I am looking for a truck cover I found some decent ones from empire. This cover was a replacement cover for a custom cover that cost three times as much and started leaking water and collecting dust under the cover in less than a year. My Empire cover is 4 months old, has survived numerous strong thunderstorms and seering Texas sun, and so far is exceeding my expectations. I have 3 cars under cover, soon the other two will be covered by Empire. http://empirecovers-review.blogspot.com/

09-26-2009, 06:46 PM	#7
mbgmike Registered User Join Date: Aug 2005 Location: Pasadena,Tx /Pto Pta DR Posts: 5,415	Re: I am looking for a truck cover Here are some of the ones we offer all swb http://www.covercraft.com/ custom fit $499.00 deluxe $175.00 Multi Bond $99.00 Poly cotton blend $125.00 Technalon $239.00 http://www.coverking.com/ Univeral CoverBond 4 $185.00 Coverguard $53.00 TriGuard $155.00 Tyvek $175.00 http://www.wolfautocovers.com/ Duralite $85.00 Evolution $189.00 Sentrex $89.00 Mike Last edited by mbgmike; 09-26-2009 at 06:49 PM. Reason: spelling

09-26-2009, 11:11 PM	#8
unclewatts 70 Chevrolet=Obsession Join Date: Jun 2009 Location: nice ca Posts: 1,067	Re: I am looking for a truck cover I gotta Wolf and I'm pretty happy with it. __________________ I'm Just like my truck. Old, Ugly and Grouchy. Except my truck starts easily in the morning and doesn't smoke! IT'S NOT EASY BEING GREEN! -Kermit the frog 1970 Chevrolet C-10 Longbed Stepside : 350, Muncie M20, 3.08 GM corp. positraction Forest green exterior/light green interior(Where all my money goes) 1996 Toyota Corolla (Parts runner)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.