junction block on an 85 v6??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ortega · 09-27-2009, 11:04 PM

im tying to keep the wiring the same on my truck which had a v6 before and now has a 454. the junction block has to poles, one side goes to the alternator and starter, does any body where the other pole is supposed to go to?
thanks

glock35ipsc · 09-27-2009, 11:58 PM

To the bulkhead connector behind the fuse block to send power to the fuse block.

ortega · 09-28-2009, 12:43 AM

oh does it. i was confused because on my diagram it goes to the front around the grill area. if i want to connect this wire where do i connect it too. my bulkhead has two power wires already, one from the main wire on the alt and one from the connector on the alt spliced with a wire from the starter. im really confused, but i want to wire my engine right

glock35ipsc · 09-28-2009, 09:06 AM

Hmm, I'll have to look at mine again. I just finished rewiring it for the 5.3 install. I was sure it ran to the bulkhead, but I'll have to double check now.

ortega · 09-28-2009, 08:50 PM

was your truck a v8 though, because in the haynes manual, the v8 an 6 cylinder junction block is wired different.

glock35ipsc · 09-28-2009, 11:19 PM

Quote:

Originally Posted by ortega

was your truck a v8 though, because in the haynes manual, the v8 an 6 cylinder junction block is wired different.

Oh crap, I didn't even see that 6!!!

Sorry!

09-27-2009, 11:04 PM	#1
ortega Registered User Join Date: Aug 2007 Location: sun valley Posts: 98	junction block on an 85 v6??? im tying to keep the wiring the same on my truck which had a v6 before and now has a 454. the junction block has to poles, one side goes to the alternator and starter, does any body where the other pole is supposed to go to? thanks

09-27-2009, 11:58 PM	#2
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,685	Re: junction block on an 85 v6??? To the bulkhead connector behind the fuse block to send power to the fuse block. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

09-28-2009, 12:43 AM	#3
ortega Registered User Join Date: Aug 2007 Location: sun valley Posts: 98	Re: junction block on an 85 v6??? oh does it. i was confused because on my diagram it goes to the front around the grill area. if i want to connect this wire where do i connect it too. my bulkhead has two power wires already, one from the main wire on the alt and one from the connector on the alt spliced with a wire from the starter. im really confused, but i want to wire my engine right

09-28-2009, 09:06 AM	#4
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,685	Re: junction block on an 85 v6??? Hmm, I'll have to look at mine again. I just finished rewiring it for the 5.3 install. I was sure it ran to the bulkhead, but I'll have to double check now. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

09-28-2009, 08:50 PM	#5
ortega Registered User Join Date: Aug 2007 Location: sun valley Posts: 98	Re: junction block on an 85 v6??? was your truck a v8 though, because in the haynes manual, the v8 an 6 cylinder junction block is wired different.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.