SD WTB: Chunk of firewall - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71stub · 10-05-2009, 03:02 PM

I need this piece of firewall for my 60 since the PO cut mine out. Let me know how much you need for it and I can get you the dimensions of the piece I need. I would like it to be at least an inch or two at least larger than my hole around. Thanks.

Bears63 · 10-05-2009, 03:25 PM

How about a chunk off a '63 cab? I know that it's not going to be exact since your's probably has a hydraulic clutch while the '63 had mechanical, so some of that area might be a little different, but I'm not sure how much. That part on the truck I'm parting out is decent. Shoot me the measurements you need and I can check it out and get some pics. Keep in mind that the truck is sitting over by Doland, so it may not be until next weekend when I can measure and cut the piece out.

*LILRED66* · 10-05-2009, 09:29 PM

I have that area from a '60 GMC cab, so it will be the same. With the dimensions, I can cut out whatever you need. Please let me know if I can help.

PS - Was the PO trying to get some hot air into the cab, or what?

10-05-2009, 03:02 PM	#1
71stub Registered User Join Date: Mar 2008 Location: Forman, ND Posts: 365	WTB: Chunk of firewall I need this piece of firewall for my 60 since the PO cut mine out. Let me know how much you need for it and I can get you the dimensions of the piece I need. I would like it to be at least an inch or two at least larger than my hole around. Thanks. Attached Images __________________ 1971 Cheyenne Short Fleet - 468BB/TH400, Tilt, Tach, PS, PB 1967 Custom Short Fleet - 327/4spd

10-05-2009, 03:25 PM	#2
Bears63 ...just another truck junkie.. Join Date: May 2009 Location: Watertown, SD Posts: 698	Re: WTB: Chunk of firewall How about a chunk off a '63 cab? I know that it's not going to be exact since your's probably has a hydraulic clutch while the '63 had mechanical, so some of that area might be a little different, but I'm not sure how much. That part on the truck I'm parting out is decent. Shoot me the measurements you need and I can check it out and get some pics. Keep in mind that the truck is sitting over by Doland, so it may not be until next weekend when I can measure and cut the piece out. __________________ Mike "Bear" Shea

10-05-2009, 09:29 PM	#3
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: WTB: Chunk of firewall I have that area from a '60 GMC cab, so it will be the same. With the dimensions, I can cut out whatever you need. Please let me know if I can help. PS - Was the PO trying to get some hot air into the cab, or what?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.