10-04-2009, 10:27 PM | #1 |
Registered User
Join Date: Jan 2008
Location: WINNIPEG
Posts: 5
|
no spark ??
okay so heres the question ---- 1971 k5 350/ new dizzy/ wires/plugs/ neut switch etc
i turn the ignition to start and it wont fire .... i can hold the key in the start position all day and it wont fire..... but as soon as i let the key go... in the run position she fires and starts up right away wtf ????
__________________
azzkikr 1971 chevy K5 Blazer 350/350 .30 over 35"s 4"inch lift custom upholstry |
10-05-2009, 12:01 AM | #2 |
Registered User
Join Date: May 2007
Location: texas
Posts: 329
|
Re: no spark ??
First guess would be the ingnition switch itself. Have you checked to see if you're getting fire at the plugs when it's cranking?
|
10-05-2009, 06:50 AM | #3 |
Registered User
Join Date: Oct 2003
Location: Central Vermont
Posts: 8,537
|
Re: no spark ??
Wires on the solenoid switched?
Something about start power vs. run power between the two small wires. |
10-05-2009, 12:34 PM | #4 |
Registered User
Join Date: Jan 2001
Location: Orem, Utah
Posts: 7,980
|
Re: no spark ??
|
10-05-2009, 06:24 PM | #5 |
Registered User
Join Date: Jan 2008
Location: WINNIPEG
Posts: 5
|
Re: no spark ??
thanks for the info guys heres what i've found only 2 wires hooked up battery and purple ignition what color is the third wire supposed to be ??
anybody?
__________________
azzkikr 1971 chevy K5 Blazer 350/350 .30 over 35"s 4"inch lift custom upholstry |
10-06-2009, 01:43 PM | #6 |
Registered User
Join Date: Jan 2008
Location: WINNIPEG
Posts: 5
|
Re: no spark ??
problem solved !!! when i changed out the dizzy to the msd type i ran a heavier gauge power wire but unintenionally hooked it up to the radio terminal on the fusebox this wire has to be hooked up to the unfused 12 volt terminal or youll have these stupid problems thanks for your input guys !!!
__________________
azzkikr 1971 chevy K5 Blazer 350/350 .30 over 35"s 4"inch lift custom upholstry |
Bookmarks |
|
|