can anybody help ID some headers? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

arejaye · 10-11-2009, 05:36 PM

I'm a newbie to the site, and glad I found it! Last weekend I bought a '71 Chevy C10. She's a bit on the rough side still, but that'll change soon enough. Right now, there's a 350 that's been dropped in, and it has the standard rams head exhaust manifolds on it(attached to a couple sweet Cherry Bombs). My dilema is this, (and trust me, you'll know I'm a newbie in many ways)....how can I ID a pair of headers that were left here from a former tenant? I know he was a Chevy guy, but ya never know about old stored stuff, and IF the headers will fit the beast, I'd def want to install 'em, but how would I know IF they'd fit my engine, or maybe if they belong entirely on another brand(god forbid) like Ford or Mopar? Measure from dead center, one pipe to the next and match known patterns? Hey....I told ya I was a newbie! haha

**70cst** · 10-11-2009, 06:20 PM

arejaye amd

from Ohio... Well you are asking a tough question. Ti ID your headers you should look to see if there are any markings on the headers. Maybe a pert number or makers mark. As far as will they fit...the only way to tell is to bolt them on. Not only do the flanges need to fit but the angles of the pipes need to clear your frame also. I'll let others chime in who have more knowledge that I. Good Luck.

toddtheodd · 10-11-2009, 07:23 PM

Can't ID crap if we can't see them...

10-11-2009, 05:36 PM	#1
arejaye Registered User Join Date: Oct 2009 Location: New London, N.C. Posts: 1	can anybody help ID some headers? I'm a newbie to the site, and glad I found it! Last weekend I bought a '71 Chevy C10. She's a bit on the rough side still, but that'll change soon enough. Right now, there's a 350 that's been dropped in, and it has the standard rams head exhaust manifolds on it(attached to a couple sweet Cherry Bombs). My dilema is this, (and trust me, you'll know I'm a newbie in many ways)....how can I ID a pair of headers that were left here from a former tenant? I know he was a Chevy guy, but ya never know about old stored stuff, and IF the headers will fit the beast, I'd def want to install 'em, but how would I know IF they'd fit my engine, or maybe if they belong entirely on another brand(god forbid) like Ford or Mopar? Measure from dead center, one pipe to the next and match known patterns? Hey....I told ya I was a newbie! haha

10-11-2009, 06:20 PM	#2
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,365	Re: can anybody help ID some headers? arejaye amd from Ohio... Well you are asking a tough question. Ti ID your headers you should look to see if there are any markings on the headers. Maybe a pert number or makers mark. As far as will they fit...the only way to tell is to bolt them on. Not only do the flanges need to fit but the angles of the pipes need to clear your frame also. I'll let others chime in who have more knowledge that I. Good Luck. __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

10-11-2009, 07:23 PM	#3
toddtheodd The oddest Todd around Join Date: May 2004 Location: Miami, Florida Posts: 1,418	Re: can anybody help ID some headers? Can't ID crap if we can't see them... __________________ "The greatest pleasure is to vanquish your enemies and chase them before you, to rob them of their wealth and see those dear to them bathed in tears, to ride their horses and clasp to your bosom their wives and daughters." Ghengis Khan IIOY???



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.