poly bushing prob... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

skeeterbug · 10-13-2009, 03:44 PM

i have hit a small snag in the rebuild of my '71 lwb, i cant seem to find a supplier that has all the mounting [B]HARDWARE AND POLY BUSHING[B] for the cab and rad support of my truck as a set. they all sell the poly bushings as a set and they all sell the hardware and oem rubber bushings as a kit but no kit with hardware and poly bushings as a kit!? anyone run into this problem or know who sells a kit with hardware and polybushings as a kit? please help.

cdowns · 10-13-2009, 03:47 PM

you're better off with the stock factory mounts IMO

skeeterbug · 10-13-2009, 05:41 PM

when u say mounts are u talking about the frame mounts that the bushings sit on or the oem rubber bushings that the body mount bolts go through.

10-13-2009, 03:44 PM	#1
skeeterbug Registered User Join Date: Jul 2009 Location: watertown, tn Posts: 332	poly bushing prob... i have hit a small snag in the rebuild of my '71 lwb, i cant seem to find a supplier that has all the mounting [B]HARDWARE AND POLY BUSHING[B] for the cab and rad support of my truck as a set. they all sell the poly bushings as a set and they all sell the hardware and oem rubber bushings as a kit but no kit with hardware and poly bushings as a kit!? anyone run into this problem or know who sells a kit with hardware and polybushings as a kit? please help. __________________ '71 LWB c10-"WORK" in progress 385 ci 4 bolt (4.040 bore), scat 6.0" forged h beams,scat forged crank 3.750, speed pro 5cc flat top, clevite bearings, .039 head gaskets,comp xr288hr 110* 288/294adv. 236/242@.50 555/576 lift, pbm hyd roller lifters, chad spiers 215cc imp. heads , comp 1.6 roler rockers, comp magnum push rods, edelbrock victor jr. single plane intake p&p (1206 gasket matched), quickfuel 750R DP , th 350 trans, 5.14 gear, 3000 stall 2012 best 1/8- 7.70 @ 87mph 1.70 60' (lil better) 2013 best 7.39 2014 best-7.38 New for 2013-strange rear coilovers, headman 1-3/4 headers, 5.13 r&p, .060 aluminum bed floor, 15x14 holeshots w/ 31x18.5 hoosier dot pro's, 15x4 holeshots w/ 26x5.5 m/t skinnies and 200+#'s in body weight loss & 6 point cage

10-13-2009, 03:47 PM	#2
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: poly bushing prob... you're better off with the stock factory mounts IMO __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

10-13-2009, 05:41 PM	#3
skeeterbug Registered User Join Date: Jul 2009 Location: watertown, tn Posts: 332	Re: poly bushing prob... when u say mounts are u talking about the frame mounts that the bushings sit on or the oem rubber bushings that the body mount bolts go through. __________________ '71 LWB c10-"WORK" in progress 385 ci 4 bolt (4.040 bore), scat 6.0" forged h beams,scat forged crank 3.750, speed pro 5cc flat top, clevite bearings, .039 head gaskets,comp xr288hr 110* 288/294adv. 236/242@.50 555/576 lift, pbm hyd roller lifters, chad spiers 215cc imp. heads , comp 1.6 roler rockers, comp magnum push rods, edelbrock victor jr. single plane intake p&p (1206 gasket matched), quickfuel 750R DP , th 350 trans, 5.14 gear, 3000 stall 2012 best 1/8- 7.70 @ 87mph 1.70 60' (lil better) 2013 best 7.39 2014 best-7.38 New for 2013-strange rear coilovers, headman 1-3/4 headers, 5.13 r&p, .060 aluminum bed floor, 15x14 holeshots w/ 31x18.5 hoosier dot pro's, 15x4 holeshots w/ 26x5.5 m/t skinnies and 200+#'s in body weight loss & 6 point cage



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.