OH Parting 72 LWB Chevy - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68 C-10 Panel · 10-04-2009, 02:55 PM

I see you said 67 painted bumper ..... was that the rear or the front, in the first pic? Really I am interested in both front and rear, and I think I could use some of the brackets. I am just outside detroit and could run down and pick up. Thanks.

**j_cst_10** · 10-04-2009, 08:02 PM

I have a 67 front bumper and a 67 hood (the hood is not all that great but would be ok for a driver)-not shown in pic. No brackets. I can supply some pics later on in the week if interested.

**j_cst_10** · 10-08-2009, 08:17 PM

Judoman, check your inbox when you get a chance.

cmt45169 · 10-09-2009, 06:45 AM

Is the tailgate still available? If so, what's the price on it? Thanks-

Redden05 · 10-14-2009, 07:13 PM

What condition is the passenger side door in?

**j_cst_10** · 10-14-2009, 08:30 PM

It is in ok shape, not great. A few extra holes where mirrors were on, but I may take a patch from it so it may not be worth it to you, depending on why you need it.

Nice SS, I am also a fellow Monte Carlo SS owner.

**j_cst_10** · 10-14-2009, 08:30 PM

Tailgate is junk.

Redden05 · 10-14-2009, 09:11 PM

I was looking for a rust free door. I am not so much worried about mirror holes.

And thanks. What year did you have?

mark57 · 10-14-2009, 10:01 PM

Did you have a chance to check on the area around the wiper motor mounts and the wiring trough ?

**j_cst_10** · 10-15-2009, 07:46 PM

Yeah sorry, I have been falling behind. I just gutted the interior and got the firewall cleared off. The panel appears to be in good shape. I am cutting the panels out of it Saturday with a plasma cutter, if it is good I will cut it out and give you a price.

**j_cst_10** · 10-15-2009, 07:50 PM

Redden05- I still own it, trying to get this 72 C10 out of the garage so I can get the car back in. I built a Dart headed 383 for it, puts down 340HP and 340 ft-lbs to the wheels, boxed control arms, eibach suspension, etc. Ran a 12.80 @110. Not really set up to launch at the strip. Next plans include a 5spd...

**70STOVEBOLT** · 10-15-2009, 08:17 PM

Jeff, got the marker lights, they look good, thanks.

mark57 · 10-15-2009, 08:41 PM

Quote:

Originally Posted by j_cst_10

Yeah sorry, I have been falling behind. I just gutted the interior and got the firewall cleared off. The panel appears to be in good shape. I am cutting the panels out of it Saturday with a plasma cutter, if it is good I will cut it out and give you a price.

Not a problem. I am ........ deep in a remodeling project so I am in no hurry. If you will not be using any part of the firewall, I would take the whole front from the windshield down to the bottom of the door (don't need the dash). I am sure once I get mine stripped out I will find more spots that need patched.

bossrod · 10-16-2009, 05:35 PM

What's the steering wheel like? Condition and color?

**j_cst_10** · 10-17-2009, 01:23 PM

It has the typical cracks and is missing the horn cover-beige color. Sorry, this truck is in beater condition. I will have a list of parts left over once the truck is gone that I will repost and see if anyone wants them.

**j_cst_10** · 10-17-2009, 01:24 PM

stovebolt-Glad you can use the side markers.

10-04-2009, 02:55 PM	#51
68 C-10 Panel Registered User Join Date: Apr 2009 Location: MI Posts: 88	Re: Parting 72 LWB Chevy I see you said 67 painted bumper ..... was that the rear or the front, in the first pic? Really I am interested in both front and rear, and I think I could use some of the brackets. I am just outside detroit and could run down and pick up. Thanks.

10-04-2009, 08:02 PM	#52
j_cst_10 Senior Member Join Date: Nov 2008 Location: Cleveland, OH Posts: 587	Re: Parting 72 LWB Chevy I have a 67 front bumper and a 67 hood (the hood is not all that great but would be ok for a driver)-not shown in pic. No brackets. I can supply some pics later on in the week if interested.

10-08-2009, 08:17 PM	#53
j_cst_10 Senior Member Join Date: Nov 2008 Location: Cleveland, OH Posts: 587	Re: Parting 72 LWB Chevy Judoman, check your inbox when you get a chance.

10-09-2009, 06:45 AM	#54
cmt45169 Registered User Join Date: May 2007 Location: Wilmington, Ohio Posts: 21	Re: Parting 72 LWB Chevy Is the tailgate still available? If so, what's the price on it? Thanks-

10-14-2009, 07:13 PM	#55
Redden05 Registered User Join Date: Jan 2007 Location: Watsontown PA 17777 Posts: 1,196	Re: Parting 72 LWB Chevy What condition is the passenger side door in?

10-14-2009, 08:30 PM	#56
j_cst_10 Senior Member Join Date: Nov 2008 Location: Cleveland, OH Posts: 587	Re: Parting 72 LWB Chevy It is in ok shape, not great. A few extra holes where mirrors were on, but I may take a patch from it so it may not be worth it to you, depending on why you need it. Nice SS, I am also a fellow Monte Carlo SS owner.

10-14-2009, 08:30 PM	#57
j_cst_10 Senior Member Join Date: Nov 2008 Location: Cleveland, OH Posts: 587	Re: Parting 72 LWB Chevy Tailgate is junk.

10-14-2009, 09:11 PM	#58
Redden05 Registered User Join Date: Jan 2007 Location: Watsontown PA 17777 Posts: 1,196	Re: Parting 72 LWB Chevy I was looking for a rust free door. I am not so much worried about mirror holes. And thanks. What year did you have?

10-14-2009, 10:01 PM	#59
mark57 Registered User Join Date: Aug 2008 Location: Mansfield, OH Posts: 130	Re: Parting 72 LWB Chevy Did you have a chance to check on the area around the wiper motor mounts and the wiring trough ?

10-15-2009, 07:46 PM	#60
j_cst_10 Senior Member Join Date: Nov 2008 Location: Cleveland, OH Posts: 587	Re: Parting 72 LWB Chevy Yeah sorry, I have been falling behind. I just gutted the interior and got the firewall cleared off. The panel appears to be in good shape. I am cutting the panels out of it Saturday with a plasma cutter, if it is good I will cut it out and give you a price.

10-15-2009, 07:50 PM	#61
j_cst_10 Senior Member Join Date: Nov 2008 Location: Cleveland, OH Posts: 587	Re: Parting 72 LWB Chevy Redden05- I still own it, trying to get this 72 C10 out of the garage so I can get the car back in. I built a Dart headed 383 for it, puts down 340HP and 340 ft-lbs to the wheels, boxed control arms, eibach suspension, etc. Ran a 12.80 @110. Not really set up to launch at the strip. Next plans include a 5spd... Last edited by j_cst_10; 10-15-2009 at 07:52 PM.

10-15-2009, 08:17 PM	#62
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,254	Re: Parting 72 LWB Chevy Jeff, got the marker lights, they look good, thanks. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

10-16-2009, 05:35 PM	#64
bossrod Registered User Join Date: Feb 2004 Location: Groton, CT Posts: 168	Re: Parting 72 LWB Chevy What's the steering wheel like? Condition and color?

10-17-2009, 01:23 PM	#65
j_cst_10 Senior Member Join Date: Nov 2008 Location: Cleveland, OH Posts: 587	Re: Parting 72 LWB Chevy It has the typical cracks and is missing the horn cover-beige color. Sorry, this truck is in beater condition. I will have a list of parts left over once the truck is gone that I will repost and see if anyone wants them.

10-17-2009, 01:24 PM	#66
j_cst_10 Senior Member Join Date: Nov 2008 Location: Cleveland, OH Posts: 587	Re: Parting 72 LWB Chevy stovebolt-Glad you can use the side markers.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.