4.3 installation - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Free88 · 10-16-2009, 09:17 PM

Does anyone have a picture of a 73-87 chevy with a 4.3 installed. Putting one in a daily driver and need photos to see where the motor mounts mount on the frame, as well as to where things hook up, especially electrical. Oh ya it is an 87 4.3 into a 86 frame. Thanks

cableguy0 · 10-16-2009, 09:25 PM

everything is exactly the same as a sbc v8 except its missing 2 cylinders. all the brackets and mount interchange its basically a direct bolt in swap

**old Rusty C10** · 10-16-2009, 10:20 PM

ive done the swap and it was direct bolt in to a small block that was on an 86 custom deluxe

Free88 · 10-17-2009, 12:00 AM

So it bolts right up to V8 mounts that are in there. Thanks guys.

gchemist · 10-17-2009, 10:10 AM

Yup!!

Post some pictures of it!!

**old Rusty C10** · 10-17-2009, 10:14 AM

you will need the radiator shroud for the v6 as its alot wider to make up for lost space.. all my old pics of the v6 truck were lost during a computer crash.. at least of the engine

Free88 · 10-17-2009, 11:40 AM

Thanks. Will do some pics when I start the install.

Pyrotechnic · 10-17-2009, 02:12 PM

I thought the motor mounts had to be moved ? The motors mounts are the same, but they bolt to a different place on the crossmember. That's how it is on 88-98 trucks anyway.

cjracing15 · 10-17-2009, 03:27 PM

I know the mounts are different on a 4X4. Frame and motor. Don't know about a 2 wheel drive.

10-16-2009, 09:17 PM	#1
Free88 Registered User Join Date: Jan 2004 Location: Northwestern Ontario Canada Posts: 359	4.3 installation Does anyone have a picture of a 73-87 chevy with a 4.3 installed. Putting one in a daily driver and need photos to see where the motor mounts mount on the frame, as well as to where things hook up, especially electrical. Oh ya it is an 87 4.3 into a 86 frame. Thanks __________________ 1986 Silverado Short box fleet side. project 2005 VW Tiguan 4 Motion 1997 Blazer S10 4x4 1990 Chevy Silverado K1500 Extended long box

10-16-2009, 09:25 PM	#2
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,950	Re: 4.3 installation everything is exactly the same as a sbc v8 except its missing 2 cylinders. all the brackets and mount interchange its basically a direct bolt in swap __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.

10-16-2009, 10:20 PM	#3
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,277	Re: 4.3 installation ive done the swap and it was direct bolt in to a small block that was on an 86 custom deluxe __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

10-17-2009, 12:00 AM	#4
Free88 Registered User Join Date: Jan 2004 Location: Northwestern Ontario Canada Posts: 359	Re: 4.3 installation So it bolts right up to V8 mounts that are in there. Thanks guys. __________________ 1986 Silverado Short box fleet side. project 2005 VW Tiguan 4 Motion 1997 Blazer S10 4x4 1990 Chevy Silverado K1500 Extended long box

10-17-2009, 10:10 AM	#5
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Re: 4.3 installation Yup!! Post some pictures of it!! __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

10-17-2009, 10:14 AM	#6
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,277	Re: 4.3 installation you will need the radiator shroud for the v6 as its alot wider to make up for lost space.. all my old pics of the v6 truck were lost during a computer crash.. at least of the engine __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

10-17-2009, 11:40 AM	#7
Free88 Registered User Join Date: Jan 2004 Location: Northwestern Ontario Canada Posts: 359	Re: 4.3 installation Thanks. Will do some pics when I start the install. __________________ 1986 Silverado Short box fleet side. project 2005 VW Tiguan 4 Motion 1997 Blazer S10 4x4 1990 Chevy Silverado K1500 Extended long box

10-17-2009, 02:12 PM	#8
Pyrotechnic Registered User Join Date: Feb 2007 Location: Austin, TX Posts: 3,930	Re: 4.3 installation I thought the motor mounts had to be moved ? The motors mounts are the same, but they bolt to a different place on the crossmember. That's how it is on 88-98 trucks anyway. __________________ 1977 GMC Sierra Grande

10-17-2009, 03:27 PM	#9
cjracing15 Registered User Join Date: Jan 2007 Location: Lexington, TN Posts: 1,427	Re: 4.3 installation I know the mounts are different on a 4X4. Frame and motor. Don't know about a 2 wheel drive. __________________ The fleet 94 Chevy 4x4 reg cab 2018 Traverse (wifes car) 1977 SWB stepside 1949 Chevy truck



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.