motor mounts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Terry33 · 10-20-2009, 01:43 PM

i have a 67 chevy c10 and it had a 292 inline 6, does anyone know if those motor mounts will work on with a 350?
thanks

69 longhorn · 10-20-2009, 02:06 PM

The dr side stand will work, but you need to swap the pass side stand for an I 250 stand(this will give a little engine setback , with no driveline mods.....using the original driveline). Or you can swap in the factory sb stands, & set the engine in (factory) sb V8 position. crazyAl

10-20-2009, 01:43 PM	#1
Terry33 Registered User Join Date: May 2008 Location: Tucson, AZ Posts: 3	motor mounts i have a 67 chevy c10 and it had a 292 inline 6, does anyone know if those motor mounts will work on with a 350? thanks

10-20-2009, 02:06 PM	#2
69 longhorn Registered User Join Date: Aug 2001 Location: rock island,il,usa Posts: 5,382	Re: motor mounts The dr side stand will work, but you need to swap the pass side stand for an I 250 stand(this will give a little engine setback , with no driveline mods.....using the original driveline). Or you can swap in the factory sb stands, & set the engine in (factory) sb V8 position. crazyAl __________________ http://community.webshots.com/user/hotrodhorn



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.