Cruise Control Intermitent Wipers(Factory)Tilt

[87Bob]

I have a tilt column that I am planning to put into my 85.

The truck has no cruise and no intermitent wipers.

The tilt column has the cruise and delayed wiper signal lever. But no interval wiper module.

Does anyone have a photo of the wiper module inplace on the column?
Does anyone have some underhood photos of a factory cruise set up? If you have parts availible see the WTB section.

Thanks!

[N2TRUX]

Anyone?

[87Bob]

Thanks for the bump.

[86 silverado short]

I would also like to see this set up. If anyone could help please.

[joe231]

back from the dead.......

[menace121978]

not whats wanted but thought i'd share anyways... i happened to score an intermitent wiper switch for the dash today at pick n pull. there was a cherry 85 stepper w/ what looked to be 117k miles. was a clunker turn in. very sad day seeing all those trucks with pink painted on the engines and parts RIPPED off. even seen a 454 in a 90's burb with 60k painted pink and a 99 ls5.3 in an ecsb truck. unbelievable.... anyways back on topic!!

[Keith Seymore]

Originally Posted by 87Bob

I have a tilt column that I am planning to put into my 85.

The truck has no cruise and no intermitent wipers.

The tilt column has the cruise and delayed wiper signal lever. But no interval wiper module.

Does anyone have a photo of the wiper module inplace on the column?
Does anyone have some underhood photos of a factory cruise set up? If you have parts availible see the WTB section.

Thanks!

Here's the wiper module, at home under the column:



I also have cruise, which I installed from a service kit, but it's on a V6. Let me know if you'd like some pictures (I don't have any underhood shots handy).

K

[joe231]

Originally Posted by menace121978

not whats wanted but thought i'd share anyways... i happened to score an intermitent wiper switch for the dash today at pick n pull. there was a cherry 85 stepper w/ what looked to be 117k miles. was a clunker turn in. very sad day seeing all those trucks with pink painted on the engines and parts RIPPED off. even seen a 454 in a 90's burb with 60k painted pink and a 99 ls5.3 in an ecsb truck. unbelievable.... anyways back on topic!!

I picked up the older dash mounted switch and module from my local pull-a-part for dirt cheap.....but it doesn't work
the P.O. had swapped in a newer tilt column with wipers and cruise on the turn stalk....so now I'm going to convert to use it

Originally Posted by Keith Seymore

Here's the wiper module, at home under the column:



I also have cruise, which I installed from a service kit, but it's on a V6. Let me know if you'd like some pictures (I don't have any underhood shots handy).

K

nice pic Keith....
I would like to see the cruise set-up if you don't mind snapping some pics

[Keith Seymore]

Ok - here's some cruise pics (disregard the dirty engine compartment, please).









As I mentioned, I added cruise to my truck as a service kit. It came with that vaccum diaphram, the mounting bracket, the fittings (on the throttle lever) and the necessary linkages. (It also came with the cruise stalk and necessary modules, switches and wiring).

Hope that helps, let me know if you have any followup questions.

K