|
10-28-2009, 09:46 AM
|
#11 |
|
Registered User
Join Date: Mar 2008
Location: tn
Posts: 286
|
Re: box dimensions
Ok here we go...
Maybe some one can make a diagram out of this for you ???? I used 3/4 MDF with Formica on both sides.. It was what was laying around at work back when I still had a job. In fact we used the CNC router and the program is saved. If I had access I could have whipped you up one in about 5 minutes.... Measurements in inches.. All out side dimensions..... Length 29 wide High 15, This is up the back as the slant on the front will be longer.. Depth at top 3 Depth at bottom is 7 .. Now as for the size of the hole I have no idea as of now and really don't want to pull the sub.. Note that the sub is mounted from the outside, also that it is a sealed box packed with poly fill.... Hope this helps....
__________________
"If at first you don't succeed use more duct tape" Red Green.... Danger --if you meet it promptly and without flinching -- you will reduce the danger by half. Never run away from anything. Never! -Winston Churchill A few of my holsters............. |
|
|
| Bookmarks |
|
|
Threaded Mode