"XTREME FORCE" CONCEPT Barrett jackson - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Damien · 10-06-2009, 12:10 PM

The Chevrolet S-10 Xtreme Force Concept Truck demonstrates what can be done with aftermarket parts, elbow grease and a little ingenuity. It was created so consumers could better visualize the many options they have in modifying their S-10 pickups. Special features include aggressive sportside fenders, PPG Orange Glow paint, GM Motorsports 4.5 Liter V6 engine with produces 450hp and 375 lbs/ft of torque, DANA 46 4.10:1 rear axle, ZQ8 suspension system and BF Goodrich Comp T/A Drag radial tires.

This sounds like it would be a very fun truck to have. It sold for $26,000. It was part of the GM collection. A lot of these concepts were sold this spring.

gchemist · 10-06-2009, 09:46 PM

wow, nice power. I bet it would be fun to drive!!

independentcustoms · 10-28-2009, 10:24 AM

$26000 is really not a bad price for that.

timcrow00 · 10-28-2009, 11:42 PM

would the 4.5l be a 4.3l .30 over and what else would it take to make 450hp besides a blower

67ChevyRedneck · 10-29-2009, 12:39 AM

At first glance I thought this was a stepside, but looking again they added the fenders off a stepside to a fleetside bed. I wish they would have left it a fleetside, I'm not big on the "dually fender look" on a small truck. Take that away, I think it looks friggin' awesome!

Damien · 10-29-2009, 12:21 PM

My 4.3 is .030 over and 266.34 cu. in. which is 4.4L. The Gm race block is aluminum and comes with a 4'' bore and can be bored to 4.125" and 350 mains (p/n 10134371). Or there is P/n 10134351 that comes with 400 mains and has a bore of 4.177 with a max of 4.125. Both blocks can take a 4" stroke. Gm also has 18* heads that were used in the Nascar Busch series v6 along with intakes for the standard non-vortec heads and race heads.
Here is the review from motor trend.
http://motortrend.automotive.com/627...kup/index.html
Here is the link to GM performance parts catalog. Look on page 273. (Open with internet Explorer)
http://viewer.zmags.com/publication/...#/0ede9029/274

BarryB · 10-29-2009, 10:48 PM

I remember that truck when they first built it, It was in one of my old mini truckin or truckin mags I used to get.
I wasn't long after that, the extreme series S10 trucks were released.

Damien · 10-30-2009, 01:07 PM

I think I have the "Truckin" mag that had the article. I think It was a small blurb with a picture from SEMA.

10-06-2009, 12:10 PM	#1
Damien Registered User Join Date: Mar 2007 Location: Farmington, MN Posts: 928	"XTREME FORCE" CONCEPT Barrett jackson The Chevrolet S-10 Xtreme Force Concept Truck demonstrates what can be done with aftermarket parts, elbow grease and a little ingenuity. It was created so consumers could better visualize the many options they have in modifying their S-10 pickups. Special features include aggressive sportside fenders, PPG Orange Glow paint, GM Motorsports 4.5 Liter V6 engine with produces 450hp and 375 lbs/ft of torque, DANA 46 4.10:1 rear axle, ZQ8 suspension system and BF Goodrich Comp T/A Drag radial tires. This sounds like it would be a very fun truck to have. It sold for $26,000. It was part of the GM collection. A lot of these concepts were sold this spring. __________________ I can still count my vehicles on two... wait three hands.

10-06-2009, 09:46 PM	#2
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Re: "XTREME FORCE" CONCEPT Barrett jackson wow, nice power. I bet it would be fun to drive!! __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

10-28-2009, 10:24 AM	#3
independentcustoms Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 133	Re: "XTREME FORCE" CONCEPT Barrett jackson $26000 is really not a bad price for that.

10-28-2009, 11:42 PM	#4
timcrow00 Registered User Join Date: Mar 2009 Location: mulvane, KS Posts: 200	Re: "XTREME FORCE" CONCEPT Barrett jackson would the 4.5l be a 4.3l .30 over and what else would it take to make 450hp besides a blower

10-29-2009, 12:39 AM	#5
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: "XTREME FORCE" CONCEPT Barrett jackson At first glance I thought this was a stepside, but looking again they added the fenders off a stepside to a fleetside bed. I wish they would have left it a fleetside, I'm not big on the "dually fender look" on a small truck. Take that away, I think it looks friggin' awesome! __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 10-29-2009 at 12:40 AM.

10-29-2009, 12:21 PM	#6
Damien Registered User Join Date: Mar 2007 Location: Farmington, MN Posts: 928	Re: "XTREME FORCE" CONCEPT Barrett jackson My 4.3 is .030 over and 266.34 cu. in. which is 4.4L. The Gm race block is aluminum and comes with a 4'' bore and can be bored to 4.125" and 350 mains (p/n 10134371). Or there is P/n 10134351 that comes with 400 mains and has a bore of 4.177 with a max of 4.125. Both blocks can take a 4" stroke. Gm also has 18* heads that were used in the Nascar Busch series v6 along with intakes for the standard non-vortec heads and race heads. Here is the review from motor trend. http://motortrend.automotive.com/627...kup/index.html Here is the link to GM performance parts catalog. Look on page 273. (Open with internet Explorer) http://viewer.zmags.com/publication/...#/0ede9029/274 __________________ I can still count my vehicles on two... wait three hands.

10-29-2009, 10:48 PM	#7
BarryB Senior Member Join Date: Jul 2006 Location: Blountville, Tn. Posts: 3,904	Re: "XTREME FORCE" CONCEPT Barrett jackson I remember that truck when they first built it, It was in one of my old mini truckin or truckin mags I used to get. I wasn't long after that, the extreme series S10 trucks were released. __________________ We could learn a lot from crayons... Some are sharp; some are pretty;and some are dull. Some have weird names; and all are different colours;but they all have to live in the same box. You may be only one person in the world, But you may also be the world to one person. * Some mistakes are too much fun to only make once. Two rules in life. 1. Never sweat the small stuff! 2. Everything is small stuff!

10-30-2009, 01:07 PM	#8
Damien Registered User Join Date: Mar 2007 Location: Farmington, MN Posts: 928	Re: "XTREME FORCE" CONCEPT Barrett jackson I think I have the "Truckin" mag that had the article. I think It was a small blurb with a picture from SEMA. __________________ I can still count my vehicles on two... wait three hands.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.