1970 GMC 3/4 ton parts truck Alberta/NT - The 1947 - Present Chevrolet & GMC Truck Message Board Network

northerngmc · 06-25-2009, 05:40 PM

For sale

1970 GMC 3/4 ton parts truck. I would like to sell as a whole but will part out if I do not get any interest as a whole (what's left) truck.

From what I know of the truck it was bought in Edmonton and shipped up the Maczenie River to Tulita (Fort Norman) where it spent most of it's life. I bought it about five years ago with the hope of fixing it up...... The north is a cold place where salt and other road chemicals are not used, therefore this truck has seen very little, if any salt.

Asking $800 for the whole truck.

$500 for the cab, with doors

$500 for front clip (fenders, hood, grill, inner fenders, core support all as one piece).

The truck has a V8 it in, but it is seized. 4 speed manual.

The truck is currently located in Fort Smith NT, but here is the deal. I am driving out to Leduc AB (just south of Edmonton) on July 1st and will deliver parts along the way (Hay River, High Level, Peace River, Valleyview, Whitecourt, (or divert throught Slave Lake/Athabasca) Edmonton). Or the truck/parts could be picked up near Leduc during the first two weeks of July.

Please respond in the thread.

I can take more pictures if needed as the truck is in my back yard ( and the wife says it shouldn't be!).

Please ask if you have questions.

I am also posting a 72 GMC 1/2 ton parts truck.

northerngmc · 06-25-2009, 05:41 PM

More pictures

northerngmc · 06-25-2009, 05:43 PM

I think the odometer shows about 80,000 miles.

northerngmc · 06-26-2009, 07:11 PM

Ttt

northerngmc · 10-31-2009, 02:29 PM

If someone is interested in the whole truck please let me know soon so I can tow it out of the yard before we get a big dump of snow.

Again I am hoping to drive to Edmonton the last week of November and can deliver for next to nothing into Northern Alberta.

Make me an offer!

06-25-2009, 05:40 PM	#1
northerngmc Registered User Join Date: Jan 2004 Location: Whitehorse YK Canada Posts: 2,651	1970 GMC 3/4 ton parts truck Alberta/NT For sale 1970 GMC 3/4 ton parts truck. I would like to sell as a whole but will part out if I do not get any interest as a whole (what's left) truck. From what I know of the truck it was bought in Edmonton and shipped up the Maczenie River to Tulita (Fort Norman) where it spent most of it's life. I bought it about five years ago with the hope of fixing it up...... The north is a cold place where salt and other road chemicals are not used, therefore this truck has seen very little, if any salt. Asking $800 for the whole truck. $500 for the cab, with doors $500 for front clip (fenders, hood, grill, inner fenders, core support all as one piece). The truck has a V8 it in, but it is seized. 4 speed manual. The truck is currently located in Fort Smith NT, but here is the deal. I am driving out to Leduc AB (just south of Edmonton) on July 1st and will deliver parts along the way (Hay River, High Level, Peace River, Valleyview, Whitecourt, (or divert throught Slave Lake/Athabasca) Edmonton). Or the truck/parts could be picked up near Leduc during the first two weeks of July. Please respond in the thread. I can take more pictures if needed as the truck is in my back yard ( and the wife says it shouldn't be!). Please ask if you have questions. I am also posting a 72 GMC 1/2 ton parts truck. Attached Images __________________ Blaine 59 GMC 9314 a.k.a. Whoopee 68 C20 50th Anniversary a.k.a. The Rat http://www.flickr.com/photos/northerngmc/ http://www.members.tripod.com/P-wee/index_032.htm 1.61803 is one H of a lot better than 3.14159, no really it is!

06-25-2009, 05:41 PM	#2
northerngmc Registered User Join Date: Jan 2004 Location: Whitehorse YK Canada Posts: 2,651	Re: 1970 GMC 3/4 ton parts truck Alberta/NT More pictures Attached Images __________________ Blaine 59 GMC 9314 a.k.a. Whoopee 68 C20 50th Anniversary a.k.a. The Rat http://www.flickr.com/photos/northerngmc/ http://www.members.tripod.com/P-wee/index_032.htm 1.61803 is one H of a lot better than 3.14159, no really it is!

06-25-2009, 05:43 PM	#3
northerngmc Registered User Join Date: Jan 2004 Location: Whitehorse YK Canada Posts: 2,651	Re: 1970 GMC 3/4 ton parts truck Alberta/NT I think the odometer shows about 80,000 miles. Attached Images __________________ Blaine 59 GMC 9314 a.k.a. Whoopee 68 C20 50th Anniversary a.k.a. The Rat http://www.flickr.com/photos/northerngmc/ http://www.members.tripod.com/P-wee/index_032.htm 1.61803 is one H of a lot better than 3.14159, no really it is!

06-26-2009, 07:11 PM	#4
northerngmc Registered User Join Date: Jan 2004 Location: Whitehorse YK Canada Posts: 2,651	Re: 1970 GMC 3/4 ton parts truck Alberta/NT Ttt __________________ Blaine 59 GMC 9314 a.k.a. Whoopee 68 C20 50th Anniversary a.k.a. The Rat http://www.flickr.com/photos/northerngmc/ http://www.members.tripod.com/P-wee/index_032.htm 1.61803 is one H of a lot better than 3.14159, no really it is!

10-31-2009, 02:29 PM	#5
northerngmc Registered User Join Date: Jan 2004 Location: Whitehorse YK Canada Posts: 2,651	Re: 1970 GMC 3/4 ton parts truck Alberta/NT If someone is interested in the whole truck please let me know soon so I can tow it out of the yard before we get a big dump of snow. Again I am hoping to drive to Edmonton the last week of November and can deliver for next to nothing into Northern Alberta. Make me an offer! __________________ Blaine 59 GMC 9314 a.k.a. Whoopee 68 C20 50th Anniversary a.k.a. The Rat http://www.flickr.com/photos/northerngmc/ http://www.members.tripod.com/P-wee/index_032.htm 1.61803 is one H of a lot better than 3.14159, no really it is!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.