TX New Flaming River Floor Shift Tilt Column - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jholley · 10-28-2009, 09:44 PM

I bought this column here on the board from PICKMUP a couple of months back for my 69. Since I'm selling the 69 I'm going to go ahead and sell the column too. I'm only asking what I paid for it which is $375 + $20 Shipping.

Here was his add from when I bought it.

"Check out the combination of billet steel u-jount that I came up with to use the stock intermediate shaft and save lots more...no need for splined shaft (saves $100) and no need for stainless intermediate shaft (saves another $100+).

These columns come with the new smooth molded arms and 3yr warranty.

You use your existing OEM intermediate shaft. Just pull the cover and cut it off one inch from the end. It still maintains the original collapsing feature and you can even cut it shorter, if you would like to move the column down and get the steering wheel further away from you. "

67c-10Texas · 10-29-2009, 05:21 PM

how does 325 sound and i can meet you in Temple. i am in san marcos

jholley · 10-29-2009, 05:42 PM

I'm pretty firm on the price for now. I just bought it a couple of months ago and haven't even taken it out of the box. I'm not trying to make any profit off of it, just what I paid. You aren't going to find one for this price brand new pretty much anywhere. I am willing to meet you in Temple to deliver it though.

jholley · 10-31-2009, 08:48 AM

This column comes with the tilt and turn signal levers as well as the universal joint for the bottom. You can eliminate your rag joint and custom fit your intermediate shaft to place the steering wheel farther away from you if you want. It's a quality piece.

**special-K** · 10-31-2009, 08:53 AM

I can`t tell,what metal/finish is it?Is it the paintable steel or brushed aluminum?

jholley · 10-31-2009, 10:24 AM

It's stainless steel.

67c-10Texas · 10-31-2009, 07:58 PM

i will take it - pm sent with arrangement details

thanks

darrell

67c-10Texas · 11-02-2009, 11:04 AM

paypal sent

10-28-2009, 09:44 PM	#1
jholley Registered User Join Date: Jul 2008 Location: TX Posts: 737	New Flaming River Floor Shift Tilt Column I bought this column here on the board from PICKMUP a couple of months back for my 69. Since I'm selling the 69 I'm going to go ahead and sell the column too. I'm only asking what I paid for it which is $375 + $20 Shipping. Here was his add from when I bought it. "Check out the combination of billet steel u-jount that I came up with to use the stock intermediate shaft and save lots more...no need for splined shaft (saves $100) and no need for stainless intermediate shaft (saves another $100+). These columns come with the new smooth molded arms and 3yr warranty. You use your existing OEM intermediate shaft. Just pull the cover and cut it off one inch from the end. It still maintains the original collapsing feature and you can even cut it shorter, if you would like to move the column down and get the steering wheel further away from you. " Attached Images __________________ ------------------------------------------------- Jim Garage fillers... 85 Chevy C10 Silverado LWB 07 Nissan Altima 2006 Mini Cooper S

10-29-2009, 05:21 PM	#2
67c-10Texas Registered User Join Date: Apr 2006 Location: Texas Posts: 259	Re: New Flaming River Floor Shift Tilt Column how does 325 sound and i can meet you in Temple. i am in san marcos

10-29-2009, 05:42 PM	#3
jholley Registered User Join Date: Jul 2008 Location: TX Posts: 737	Re: New Flaming River Floor Shift Tilt Column I'm pretty firm on the price for now. I just bought it a couple of months ago and haven't even taken it out of the box. I'm not trying to make any profit off of it, just what I paid. You aren't going to find one for this price brand new pretty much anywhere. I am willing to meet you in Temple to deliver it though. __________________ ------------------------------------------------- Jim Garage fillers... 85 Chevy C10 Silverado LWB 07 Nissan Altima 2006 Mini Cooper S

10-31-2009, 08:48 AM	#4
jholley Registered User Join Date: Jul 2008 Location: TX Posts: 737	Re: New Flaming River Floor Shift Tilt Column This column comes with the tilt and turn signal levers as well as the universal joint for the bottom. You can eliminate your rag joint and custom fit your intermediate shaft to place the steering wheel farther away from you if you want. It's a quality piece. __________________ ------------------------------------------------- Jim Garage fillers... 85 Chevy C10 Silverado LWB 07 Nissan Altima 2006 Mini Cooper S

10-31-2009, 08:53 AM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: New Flaming River Floor Shift Tilt Column I can`t tell,what metal/finish is it?Is it the paintable steel or brushed aluminum? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-31-2009, 10:24 AM	#6
jholley Registered User Join Date: Jul 2008 Location: TX Posts: 737	Re: New Flaming River Floor Shift Tilt Column It's stainless steel. __________________ ------------------------------------------------- Jim Garage fillers... 85 Chevy C10 Silverado LWB 07 Nissan Altima 2006 Mini Cooper S

10-31-2009, 07:58 PM	#7
67c-10Texas Registered User Join Date: Apr 2006 Location: Texas Posts: 259	Re: New Flaming River Floor Shift Tilt Column i will take it - pm sent with arrangement details thanks darrell

11-02-2009, 11:04 AM	#8
67c-10Texas Registered User Join Date: Apr 2006 Location: Texas Posts: 259	Re: New Flaming River Floor Shift Tilt Column paypal sent



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.