VA ft drive shaft out of a 72 4wd blazer f/s - The 1947 - Present Chevrolet & GMC Truck Message Board Network

billsbowtie · 11-02-2009, 08:28 PM

$100.00 shipped.

blazin 70 · 11-02-2009, 09:44 PM

Is the drive shaft tight with no slop in the splines?

billsbowtie · 11-02-2009, 10:31 PM

i will double check it tues.

billsbowtie · 11-03-2009, 10:25 PM

shaft seems to be good and tight splines look good there may be a 1/4 inch of play if that. bill

11-02-2009, 08:28 PM	#1
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	ft drive shaft out of a 72 4wd blazer f/s $100.00 shipped. __________________ i have 67/72 chevy truck parts f/s.

11-02-2009, 09:44 PM	#2
blazin 70 Registered User Join Date: Nov 2008 Location: canton nc Posts: 59	Re: ft drive shaft out of a 72 4wd blazer f/s Is the drive shaft tight with no slop in the splines?

11-02-2009, 10:31 PM	#3
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: ft drive shaft out of a 72 4wd blazer f/s i will double check it tues. __________________ i have 67/72 chevy truck parts f/s.

11-03-2009, 10:25 PM	#4
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: ft drive shaft out of a 72 4wd blazer f/s shaft seems to be good and tight splines look good there may be a 1/4 inch of play if that. bill __________________ i have 67/72 chevy truck parts f/s.



Register or Log In To remove these advertisements.