Need help with the ID of a maifold ...Thanks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**70cst** · 11-14-2009, 12:59 PM

Lets see if we can get info that 67ss is looking for...
We need help on a (69) GM part #? It's either 8283751 or 6283751. Is it cast or aluminum? If I were guessing I am thinking cast? And the answer is? Oh yes ... thanks in advance.

**too much stuff** · 11-14-2009, 01:06 PM

And the answer is: i think your number is 6263751. 1972 350 corvette. 4BC, cast iron, 200 horse.

**67sss** · 11-14-2009, 01:31 PM

would the "pad", I'll call it, for the choke screw- that goes into the manifold- be made of a different material? I ask because I busted the head off and had to drill out the rest with a 1/8th bit and it sure looked like aluminum to me?

11-14-2009, 12:59 PM	#1
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,365	Need help with the ID of a maifold ...Thanks Lets see if we can get info that 67ss is looking for... We need help on a (69) GM part #? It's either 8283751 or 6283751. Is it cast or aluminum? If I were guessing I am thinking cast? And the answer is? Oh yes ... thanks in advance. __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder! Last edited by 70cst; 11-14-2009 at 01:01 PM.

11-14-2009, 01:06 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,718	Re: Need help with the ID of a maifold ...Thanks And the answer is: i think your number is 6263751. 1972 350 corvette. 4BC, cast iron, 200 horse. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

11-14-2009, 01:31 PM	#3
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,322	Re: Need help with the ID of a manifold ...Thanks would the "pad", I'll call it, for the choke screw- that goes into the manifold- be made of a different material? I ask because I busted the head off and had to drill out the rest with a 1/8th bit and it sure looked like aluminum to me?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.