3/4 ton to 1/2 ton supension? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KQQL IT · 11-14-2009, 06:32 PM

The ball joint diameter where it presses into the lower A arm is larger. So you cant put a 1/2 balljoint in 3/4 A arm we tried. You can also reem the 1/2 ton spindle to the 3/4 ton ball joint.

**lolife99** · 11-14-2009, 07:29 PM

Quote:

Originally Posted by KQQL IT

The ball joint diameter where it presses into the lower A arm is larger. So you cant put a 1/2 balljoint in 3/4 A arm we tried. You can also reem the 1/2 ton spindle to the 3/4 ton ball joint.

That's the cool thing about ECE's "conversion" spindles.
No need to change your 3/4 ton ball joints.
The spindle works with the 3/4 ton balljoints and tie rod ends,... and uses a 1/2 ton rotor and caliper.

11-14-2009, 06:32 PM	#1
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,322	Re: 3/4 ton to 1/2 ton supension? The ball joint diameter where it presses into the lower A arm is larger. So you cant put a 1/2 balljoint in 3/4 A arm we tried. You can also reem the 1/2 ton spindle to the 3/4 ton ball joint. __________________ " That didnt make it any newer " " Dont antique the equipment "



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.