MN Headers, Exhaust Manifolds, Heat Shields - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hgs_notes · 11-09-2009, 01:22 AM

The headers are from Mr. Gasket, quite a while ago actually. I ran them for several years and had no leaks or other problems with them. They fit a small block and I had a 3 on the tree when I installed them. I later swapped to an automatic, but never ran a column shifter, but I can't really see where they would have clearance problems. I just decided to go with some coated headers, and don't want these to be wasted in a scrap pile. $35 plus shipping.

The exhaust manifolds are from the 70's sometime. I'll post the casting numbers and details later. They worked fine, ran them on my Jimmy, but swapped in some nice headers instead. $25 plus shipping.

Also have two of the spark plug heat shields. The other two were trashed. $10 shipping included.

hgs_notes · 11-09-2009, 06:36 PM

bump

49m · 11-09-2009, 09:35 PM

how much for shiping on the headers to 40075

hgs_notes · 11-10-2009, 12:24 AM

Quote:

Originally Posted by 49m

how much for shiping on the headers to 40075

I'll let you know tomorrow.

hgs_notes · 11-10-2009, 03:42 PM

Quote:

Originally Posted by 49m

how much for shiping on the headers to 40075

UPS is $29
USPS Priority is $26
USPS Parcel is $18

I'd recommend priority. If there is any problems and they return it to me, I have to pay for return shipping just to get it back, then pay again to re-ship it.

hgs_notes · 11-10-2009, 03:48 PM

The exhaust manifold casting numbers are 364753 for the left side and 346222 for the right side, which means 1976-1980.

**Don Brace** · 11-10-2009, 03:59 PM

What is the shipping to 55901 Rochester MN for the headers.
Thanks
Don Brace in MN

hgs_notes · 11-10-2009, 06:23 PM

Quote:

Originally Posted by Don Brace

What is the shipping to 55901 Rochester MN for the headers.
Thanks
Don Brace in MN

That would be $17 priority and you would probably get them next day.

hgs_notes · 11-11-2009, 10:23 AM

bump for the day

49m · 11-11-2009, 11:37 AM

i will pass

hgs_notes · 11-12-2009, 01:54 PM

offers?

1968CHEVYC10 · 11-12-2009, 02:24 PM

shipping on the headers to 77377?
thanks

hgs_notes · 11-12-2009, 03:20 PM

Quote:

Originally Posted by 1968CHEVYC10

shipping on the headers to 77377?
thanks

Probably too much. Priority is $43, parcel post is $20. UPS Ground is $32.

1968CHEVYC10 · 11-13-2009, 11:19 PM

$55 isn't too bad, I just have to decide if I want to spend it right now even though my truck isn't on the road yet. how would you rate these performance wise? and would I have any issues with clearance? I've got a 350 with a 3spd column tranny.

hgs_notes · 11-14-2009, 08:35 AM

Quote:

Originally Posted by 1968CHEVYC10

$55 isn't too bad, I just have to decide if I want to spend it right now even though my truck isn't on the road yet. how would you rate these performance wise? and would I have any issues with clearance? I've got a 350 with a 3spd column tranny.

Performance wise, they will compare with most other long tube headers on a small block. When I first installed them, I had a 3 on the tree and had no clearance issues with that. The only tight spot was #4 sparkplug I think, and that wasn't that bad. I had them a long time, but probably only about 12,000 miles.

hgs_notes · 11-15-2009, 03:39 PM

Quote:

Originally Posted by 1968CHEVYC10

$55 isn't too bad, I just have to decide if I want to spend it right now even though my truck isn't on the road yet. how would you rate these performance wise? and would I have any issues with clearance? I've got a 350 with a 3spd column tranny.

Don has decided to buy them, but thanks for the interest.

11-09-2009, 01:22 AM	#1
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Headers, Exhaust Manifolds, Heat Shields The headers are from Mr. Gasket, quite a while ago actually. I ran them for several years and had no leaks or other problems with them. They fit a small block and I had a 3 on the tree when I installed them. I later swapped to an automatic, but never ran a column shifter, but I can't really see where they would have clearance problems. I just decided to go with some coated headers, and don't want these to be wasted in a scrap pile. $35 plus shipping. The exhaust manifolds are from the 70's sometime. I'll post the casting numbers and details later. They worked fine, ran them on my Jimmy, but swapped in some nice headers instead. $25 plus shipping. Also have two of the spark plug heat shields. The other two were trashed. $10 shipping included. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

11-09-2009, 06:36 PM	#2
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Re: Headers, Exhaust Manifolds, Heat Shields bump __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

11-09-2009, 09:35 PM	#3
49m Registered User Join Date: Aug 2007 Location: Turners Station,Ky Posts: 842	Re: Headers, Exhaust Manifolds, Heat Shields how much for shiping on the headers to 40075 __________________ My Rides 1969 Mustang gt coupe 1971 Chevy Cheyenne 1986 Iroc camaro 1986 K10 Short Bed 1987 Iroc Camaro 1990 rs Camaro 1992 350 ss truck 1998 Honda Civic 2005 Ram 2500 Cummins My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=279831 Last edited by 49m; 11-09-2009 at 09:36 PM.

11-10-2009, 03:48 PM	#6
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Re: Headers, Exhaust Manifolds, Heat Shields The exhaust manifold casting numbers are 364753 for the left side and 346222 for the right side, which means 1976-1980. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

11-10-2009, 03:59 PM	#7
Don Brace Active Member Join Date: Nov 2002 Location: Clarks Grove MN Posts: 487	Re: Headers, Exhaust Manifolds, Heat Shields What is the shipping to 55901 Rochester MN for the headers. Thanks Don Brace in MN __________________ Don Brace 55 Nomad 56 Nomad 58 Impalla Coupe 58 Bel-Aire 4D HT 61 Impala CVRT 409 4 SP 2- 71 Longhorns Always looking for old toy trains, Juke boxes Pin ball and game machines.

11-11-2009, 10:23 AM	#9
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Re: Headers, Exhaust Manifolds, Heat Shields bump for the day __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

11-11-2009, 11:37 AM	#10
49m Registered User Join Date: Aug 2007 Location: Turners Station,Ky Posts: 842	Re: Headers, Exhaust Manifolds, Heat Shields i will pass __________________ My Rides 1969 Mustang gt coupe 1971 Chevy Cheyenne 1986 Iroc camaro 1986 K10 Short Bed 1987 Iroc Camaro 1990 rs Camaro 1992 350 ss truck 1998 Honda Civic 2005 Ram 2500 Cummins My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=279831

11-12-2009, 01:54 PM	#11
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Re: Headers, Exhaust Manifolds, Heat Shields offers? __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

11-12-2009, 02:24 PM	#12
1968CHEVYC10 Registered User Join Date: Aug 2009 Location: Tomball, TX Posts: 578	Re: Headers, Exhaust Manifolds, Heat Shields shipping on the headers to 77377? thanks __________________ '68 C10 LWB 6.2NA/NP833 3.73's

11-13-2009, 11:19 PM	#14
1968CHEVYC10 Registered User Join Date: Aug 2009 Location: Tomball, TX Posts: 578	Re: Headers, Exhaust Manifolds, Heat Shields $55 isn't too bad, I just have to decide if I want to spend it right now even though my truck isn't on the road yet. how would you rate these performance wise? and would I have any issues with clearance? I've got a 350 with a 3spd column tranny. __________________ '68 C10 LWB 6.2NA/NP833 3.73's



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.