factory tach dash - The 1947 - Present Chevrolet & GMC Truck Message Board Network

scott123 · 11-15-2009, 06:17 PM

i need a good vendor for the circuit strips for my factory tach dash...everything works except for the temp gage....strip is bad....s.

**leddzepp** · 11-15-2009, 06:21 PM

Did you try working the mounting nuts back and forth a little? I had the same problem, and it ended up being loose contact. Otherwise if it is bad, I have heard the repop that Brothers sells is well made.

JimKshortstep4x4 · 11-15-2009, 07:45 PM

If you work carefully it is possible to repair the strip by soldering a small jumper wire over the bad spot.

Jim

72BlckButy · 11-15-2009, 09:08 PM

I'd assume all the repop circuit panels are the same, but I know several that have used the one sold by Classic Parts of America (the old Chevy Duty).

scott123 · 11-16-2009, 07:48 AM

maybe i had never been looking for one but i aw one in Classic Chevy last night. I may tru to solder across the bad spot. So far I can't locate the actual cause. I think I will make the solder attempt and try it just in case there is something causing it I have not found. Thanks. Scott

KEL · 11-16-2009, 09:05 AM

didn't GM make a "solder pen" for repairing the
rear window defroster ? Might be worth a try.

11-15-2009, 06:17 PM	#1
scott123 Registered User Join Date: Dec 2007 Location: Middleburg, North Carolina Posts: 480	factory tach dash i need a good vendor for the circuit strips for my factory tach dash...everything works except for the temp gage....strip is bad....s.

11-15-2009, 06:21 PM	#2
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: factory tach dash Did you try working the mounting nuts back and forth a little? I had the same problem, and it ended up being loose contact. Otherwise if it is bad, I have heard the repop that Brothers sells is well made. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

11-15-2009, 07:45 PM	#3
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: factory tach dash If you work carefully it is possible to repair the strip by soldering a small jumper wire over the bad spot. Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC

11-15-2009, 09:08 PM	#4
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: factory tach dash I'd assume all the repop circuit panels are the same, but I know several that have used the one sold by Classic Parts of America (the old Chevy Duty). __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) Last edited by 72BlckButy; 11-15-2009 at 09:08 PM.

11-16-2009, 07:48 AM	#5
scott123 Registered User Join Date: Dec 2007 Location: Middleburg, North Carolina Posts: 480	Re: factory tach dash maybe i had never been looking for one but i aw one in Classic Chevy last night. I may tru to solder across the bad spot. So far I can't locate the actual cause. I think I will make the solder attempt and try it just in case there is something causing it I have not found. Thanks. Scott

11-16-2009, 09:05 AM	#6
KEL 72 GMC Join Date: Feb 2008 Location: Wells, Maine Posts: 534	Re: factory tach dash didn't GM make a "solder pen" for repairing the rear window defroster ? Might be worth a try.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.