bad cab mounts on the frame help! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

leadsled · 11-18-2009, 05:48 PM

Can i buy new cab mounts for my frame or do i try to make new ones?

**Clyde65** · 11-18-2009, 06:03 PM

You can make some, you can also buy some from guys here that will cut the rivets off of a parts truck they have and send them to you. LilRed might be able to help

navysnipe · 11-18-2009, 06:10 PM

Yeah, Brothers has them you can buy them in pairs, and get only the ones you need. They became available after I called around and got a set out a boneyard in California.

Navysnipe

leadsled · 11-18-2009, 07:04 PM

are the mounts the same as the 67's

**Captainfab** · 11-19-2009, 01:43 AM

Which mounts are you referring to, front or back, and what year of truck has the bad mounts? The rear mounts on a '67 are different than the rears on a '63-'66. I'm not sure about the fronts, I'd have to check.

Quote:

Originally Posted by leadsled

are the mounts the same as the 67's

*LILRED66* · 11-19-2009, 02:28 AM

Are you talking about the frame perches? Cab-to-frame mounts? Cab supports? Front or rear? 1/2 ton or 3/4 ton?

All of these things make a difference in what is available aftermarket or used.

I know where you can get all of the above, in good, used condition, so let me know if you are interested.

Good luck with your project.

G-REX · 11-19-2009, 07:06 AM

Try parker Metal Products near PittsburghPa. Actually in Tarentum off of Rt 366,bought alot of sheetmetal there and they will bend you anything .I don't know if they ship.

leadsled · 11-19-2009, 03:01 PM

the truck i have is a 66 c10 and all the cab mounts that are riveted to the frame are bad. what do i do

SCOTI · 11-19-2009, 03:18 PM

Quote:

Originally Posted by Captainfab

Which mounts are you referring to, front or back, and what year of truck has the bad mounts? The rear mounts on a '67 are different than the rears on a '63-'66. I'm not sure about the fronts, I'd have to check.

Rears are different (6x-66's are higher vs. 67-72's); the fronts are close enough to swap but the spacing on the rivet holes is different for the side of the frame.

G-REX · 11-19-2009, 03:42 PM

Again Parker Metal sells a universal frame to body mount with bushings included,used them on other s before,just nee to fab alittle.If you need the number,let me know.

**Captainfab** · 11-20-2009, 01:00 AM

Are just the tops bad.....where the mounts set? If so then If you can't find some good used oned to replace them, then just replace the top part. Do you have a way to weld? Most any welding/fabrication shop should be able to make the pieces for you (I know I could) as long as you provide them with either dimensions or patterns. Once you have your new pieces, cut out the bad part, and weld in the new pieces

Quote:

Originally Posted by leadsled

the truck i have is a 66 c10 and all the cab mounts that are riveted to the frame are bad. what do i do

11-18-2009, 05:48 PM	#1
leadsled Registered User Join Date: Jul 2009 Location: Pottsville Pa Posts: 19	bad cab mounts on the frame help! Can i buy new cab mounts for my frame or do i try to make new ones?

11-18-2009, 06:03 PM	#2
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,541	Re: bad cab mounts on the frame help! You can make some, you can also buy some from guys here that will cut the rivets off of a parts truck they have and send them to you. LilRed might be able to help __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!* Last edited by Clyde65; 11-18-2009 at 06:03 PM.

11-18-2009, 06:10 PM	#3
navysnipe Registered User Join Date: Apr 2008 Location: Sabattus, Maine Posts: 84	Re: bad cab mounts on the frame help! Yeah, Brothers has them you can buy them in pairs, and get only the ones you need. They became available after I called around and got a set out a boneyard in California. Navysnipe

11-18-2009, 07:04 PM	#4
leadsled Registered User Join Date: Jul 2009 Location: Pottsville Pa Posts: 19	Re: bad cab mounts on the frame help! are the mounts the same as the 67's

11-19-2009, 02:28 AM	#6
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: bad cab mounts on the frame help! Are you talking about the frame perches? Cab-to-frame mounts? Cab supports? Front or rear? 1/2 ton or 3/4 ton? All of these things make a difference in what is available aftermarket or used. I know where you can get all of the above, in good, used condition, so let me know if you are interested. Good luck with your project.

11-19-2009, 07:06 AM	#7
G-REX Registered User Join Date: Apr 2009 Location: Butler,Pa. Posts: 70	Re: bad cab mounts on the frame help! Try parker Metal Products near PittsburghPa. Actually in Tarentum off of Rt 366,bought alot of sheetmetal there and they will bend you anything .I don't know if they ship.

11-19-2009, 03:01 PM	#8
leadsled Registered User Join Date: Jul 2009 Location: Pottsville Pa Posts: 19	Re: bad cab mounts on the frame help! the truck i have is a 66 c10 and all the cab mounts that are riveted to the frame are bad. what do i do

11-19-2009, 03:42 PM	#10
G-REX Registered User Join Date: Apr 2009 Location: Butler,Pa. Posts: 70	Re: bad cab mounts on the frame help! Again Parker Metal sells a universal frame to body mount with bushings included,used them on other s before,just nee to fab alittle.If you need the number,let me know.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.