4SPD to 200 4R Neutral Safety Switch? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rsavage · 11-23-2009, 03:35 PM

I am gathering parts and info for a 200 4R install in my Burb. I have installed an automatic column only so far. Since my truck was a four speed, I assume that the harness did not have provisions for the Neutral safety switch. Anyone have a "fix" ? Secondly, What do you do about a backup light switch? Thanks for your expertise and assistance.

cdowns · 11-23-2009, 04:12 PM

fing the large cauge purple wire that goes to the "s" terminal of the starter and place theNSS in series in that wire//find the wires that go to backup lights and hook to the backup part of NSS

rsavage · 11-23-2009, 04:16 PM

Thanks much cdowns!

Longhorn Man · 11-23-2009, 06:09 PM

I'd run it without personally.
Just don't leave it in gear when you shut it off. It'll roll away and make you look like an idiot if you do.
I could neverr understand why an automatic got the switch, but the stickshift never did.

Average Joe · 11-24-2009, 01:41 AM

It seems as if every time I have a question regarding these trucks I find someone else asking the same question. So thanks for answering my question as well.

11-23-2009, 03:35 PM	#1
rsavage Registered User Join Date: Aug 2009 Location: Alden NY Posts: 2,705	4SPD to 200 4R Neutral Safety Switch? I am gathering parts and info for a 200 4R install in my Burb. I have installed an automatic column only so far. Since my truck was a four speed, I assume that the harness did not have provisions for the Neutral safety switch. Anyone have a "fix" ? Secondly, What do you do about a backup light switch? Thanks for your expertise and assistance.

11-23-2009, 04:12 PM	#2
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: 4SPD to 200 4R Neutral Safety Switch? fing the large cauge purple wire that goes to the "s" terminal of the starter and place theNSS in series in that wire//find the wires that go to backup lights and hook to the backup part of NSS __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

11-23-2009, 04:16 PM	#3
rsavage Registered User Join Date: Aug 2009 Location: Alden NY Posts: 2,705	Re: 4SPD to 200 4R Neutral Safety Switch? Thanks much cdowns!

11-23-2009, 06:09 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: 4SPD to 200 4R Neutral Safety Switch? I'd run it without personally. Just don't leave it in gear when you shut it off. It'll roll away and make you look like an idiot if you do. I could neverr understand why an automatic got the switch, but the stickshift never did.

11-24-2009, 01:41 AM	#5
Average Joe Registered User Join Date: Feb 2009 Location: Southern Oregon Posts: 1,352	Re: 4SPD to 200 4R Neutral Safety Switch? It seems as if every time I have a question regarding these trucks I find someone else asking the same question. So thanks for answering my question as well. __________________ 1967 C10 Suburban 454/TH400/3.07's An Average Joe and His 'Burb: http://67-72chevytrucks.com/vboard/s...d.php?t=775843



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.