69-72 seats? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hugger6933 · 11-28-2009, 01:02 AM

I am gathering parts for the two trucks I am building. I already have buddy buckets in my 68 GMC along with a tach-vac dash and tilt. My 70 c10 I have a tach-vac dash and a tilt. I need to find some buckets and a console. I see that some people say the console for the chevy truck is the same for many years after the body stlye change. Can any one tell me what years fit[right] and look like they belong there? Jim

**mikey531** · 11-28-2009, 08:14 AM

This is what I did

http://67-72chevytrucks.com/vboard/s...d.php?t=368266

hugger6933 · 11-28-2009, 09:22 AM

Those won't work for me. I'm 6'3 350 lbs. I have SEVERAL sets of those [since I rebuild them] and have about 10 of those 99 and up trucks for parts. The seat sets to tall in the truck for me. I was hoping for a more of a stock looking set up. I guess what I am asking is will buckets out of a 73-87 truck work the same as the69-72? Jim

**special-K** · 11-29-2009, 08:01 AM

The consoles stayed the same through`75,then went to the cup holder type.the seats are the same,too,except for the shape o the foam.I`d venture to say that,with the post`72 ones being more squared,the foam should be able to be shaed to the 71/72 or 69/70 shape.
The seats went to hi-back after that,until they were discontinued in pickups.

11-28-2009, 01:02 AM	#1
hugger6933 Registered User Join Date: Oct 2008 Location: Marianna Arkansas Posts: 7,261	69-72 seats? I am gathering parts for the two trucks I am building. I already have buddy buckets in my 68 GMC along with a tach-vac dash and tilt. My 70 c10 I have a tach-vac dash and a tilt. I need to find some buckets and a console. I see that some people say the console for the chevy truck is the same for many years after the body stlye change. Can any one tell me what years fit[right] and look like they belong there? Jim

11-28-2009, 08:14 AM	#2
mikey531 Senior Member Join Date: Jul 2009 Location: Exeter, NH Posts: 786	Re: 69-72 seats? This is what I did http://67-72chevytrucks.com/vboard/s...d.php?t=368266

11-28-2009, 09:22 AM	#3
hugger6933 Registered User Join Date: Oct 2008 Location: Marianna Arkansas Posts: 7,261	Re: 69-72 seats? Those won't work for me. I'm 6'3 350 lbs. I have SEVERAL sets of those [since I rebuild them] and have about 10 of those 99 and up trucks for parts. The seat sets to tall in the truck for me. I was hoping for a more of a stock looking set up. I guess what I am asking is will buckets out of a 73-87 truck work the same as the69-72? Jim

11-29-2009, 08:01 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: 69-72 seats? The consoles stayed the same through`75,then went to the cup holder type.the seats are the same,too,except for the shape o the foam.I`d venture to say that,with the post`72 ones being more squared,the foam should be able to be shaed to the 71/72 or 69/70 shape. The seats went to hi-back after that,until they were discontinued in pickups. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 11-29-2009 at 08:02 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.