Buddy bucket assembly pictures!? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mt Man Chad · 11-22-2009, 09:19 PM

I'm getting ready to put my Buddy buckets together next week!
Dipped and painted frame, new covers, new foam, nickel plated brackets ect ect ect... it should turn out nice!

Does anybody have detailed pictures of the bottom assembled with all the brackets, Thick washers "passenger side" if i remember right? and anything else to help assemble them.

I have all the correct parts just not assembly pictures to put it all together.

Thanks in advance!

Rack Man · 11-22-2009, 10:32 PM

Bump...I'd like to see the pics too...Mine came, what appeared to be complete but did not have any "thick washers" or really any other hardware except for bolts holding them to the frame...and of course the brackets that hold the center compartment to the frame...

RM

stllookn · 11-23-2009, 12:07 AM

hmmm...got this part.

**wancosc356** · 11-30-2009, 08:50 PM

Ttt

Sammy · 11-30-2009, 09:14 PM

Not sure what you was really wanting. Everything was self explanatory when I reinstalled mine.

**wancosc356** · 11-30-2009, 09:21 PM

I personally would like to see a schematic or even pictures of how the underside is all assembled.

I just got my set of buddy buckets today. The driver is installed on a slider. The passenger is not installed on the frame. Just curious how it all goes together. Thanks.

Chevy4Life · 11-30-2009, 10:32 PM

The pass. side bolts up using 4 little brackets. Thick spacers go between the seat and the slider. I'll see if I can find some pics.

**wancosc356** · 11-30-2009, 10:35 PM

My passenger seat has the 4 little brackets. So I just need to grab some hex bolts and nut to mount them?

Ill have to look at my driver side to see if there are spacers between the slider and seat.

Pics would be awesome. Thanks.

Chevy4Life · 11-30-2009, 10:38 PM

Yep they just bolt on. If your sliders are still on the seat they should still be there.

**wancosc356** · 11-30-2009, 10:40 PM

Ok. Cool. Thanks.

Does anyone repop the sliders? I think I would like to fab up a set for the passenger seat.

Chevy4Life · 11-30-2009, 10:56 PM

Not that I know of. I used a set from a dodge and flipped them around for the pass. side. My pass. seat doesn't fold forward so I did it mainly for access.

**wancosc356** · 11-30-2009, 11:05 PM

Oh ok. Both of my seats fold forward. But I think it would be nice to have that side on a slider too. Not a necessity though.

**clay68c10** · 12-01-2009, 12:33 AM

Do anyone's buckets have that seatbelt holder shown in the assy manual? Mine don't and there aren't any holes for it either.
My pass seat has sliders, anyone else? They're stock as far as I know.

**wancosc356** · 12-01-2009, 01:00 AM

Quote:

Originally Posted by clay68c10

Do anyone's buckets have that seatbelt holder shown in the assy manual? Mine don't and there aren't any holes for it either.
My pass seat has sliders, anyone else? They're stock as far as I know.

Mine don't. My passenger seat doesn't have sliders either. I don't think they had sliders on the passenger seat from the the factory.

11-22-2009, 09:19 PM	#1
Mt Man Chad Registered User Join Date: Oct 2006 Location: Oakridge Oregon Posts: 1,864	Buddy bucket assembly pictures!? I'm getting ready to put my Buddy buckets together next week! Dipped and painted frame, new covers, new foam, nickel plated brackets ect ect ect... it should turn out nice! Does anybody have detailed pictures of the bottom assembled with all the brackets, Thick washers "passenger side" if i remember right? and anything else to help assemble them. I have all the correct parts just not assembly pictures to put it all together. Thanks in advance! __________________ 68 CST SWB - Gold/White 50th anniversary /TH350/Buddy Buckets/3.73 Posi/dogdish caps. 68 K10 Burb - Gold/White 327/SM465/NP205/3.73 "Daa Burb" build thread

11-22-2009, 10:32 PM	#2
Rack Man Registered User Join Date: Sep 2008 Location: Tempe, AZ Posts: 770	Re: Buddy bucket assembly pictures!? Bump...I'd like to see the pics too...Mine came, what appeared to be complete but did not have any "thick washers" or really any other hardware except for bolts holding them to the frame...and of course the brackets that hold the center compartment to the frame... RM __________________ My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=309288 Last edited by Rack Man; 11-22-2009 at 10:33 PM.

11-23-2009, 12:07 AM	#3
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: Buddy bucket assembly pictures!? hmmm...got this part. Attached Images __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary) Last edited by stllookn; 11-23-2009 at 12:08 AM.

11-30-2009, 08:50 PM	#4
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: Buddy bucket assembly pictures!? Ttt __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

11-30-2009, 09:14 PM	#5
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: Buddy bucket assembly pictures!? Not sure what you was really wanting. Everything was self explanatory when I reinstalled mine. __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

11-30-2009, 09:21 PM	#6
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: Buddy bucket assembly pictures!? I personally would like to see a schematic or even pictures of how the underside is all assembled. I just got my set of buddy buckets today. The driver is installed on a slider. The passenger is not installed on the frame. Just curious how it all goes together. Thanks. __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

11-30-2009, 10:32 PM	#7
Chevy4Life Senior Member Join Date: Feb 2003 Location: Las Vegas, NV Posts: 749	Re: Buddy bucket assembly pictures!? The pass. side bolts up using 4 little brackets. Thick spacers go between the seat and the slider. I'll see if I can find some pics.

11-30-2009, 10:35 PM	#8
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: Buddy bucket assembly pictures!? My passenger seat has the 4 little brackets. So I just need to grab some hex bolts and nut to mount them? Ill have to look at my driver side to see if there are spacers between the slider and seat. Pics would be awesome. Thanks. __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

11-30-2009, 10:38 PM	#9
Chevy4Life Senior Member Join Date: Feb 2003 Location: Las Vegas, NV Posts: 749	Re: Buddy bucket assembly pictures!? Yep they just bolt on. If your sliders are still on the seat they should still be there.

11-30-2009, 10:40 PM	#10
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: Buddy bucket assembly pictures!? Ok. Cool. Thanks. Does anyone repop the sliders? I think I would like to fab up a set for the passenger seat. __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152 Last edited by wancosc356; 11-30-2009 at 10:41 PM.

11-30-2009, 10:56 PM	#11
Chevy4Life Senior Member Join Date: Feb 2003 Location: Las Vegas, NV Posts: 749	Re: Buddy bucket assembly pictures!? Not that I know of. I used a set from a dodge and flipped them around for the pass. side. My pass. seat doesn't fold forward so I did it mainly for access.

11-30-2009, 11:05 PM	#12
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: Buddy bucket assembly pictures!? Oh ok. Both of my seats fold forward. But I think it would be nice to have that side on a slider too. Not a necessity though. __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

12-01-2009, 12:33 AM	#13
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,991	Re: Buddy bucket assembly pictures!? Do anyone's buckets have that seatbelt holder shown in the assy manual? Mine don't and there aren't any holes for it either. My pass seat has sliders, anyone else? They're stock as far as I know. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.