MS Scrap Yard Bound - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*1sik52* · 11-24-2009, 11:00 AM

I have some parts leftover from a 72 Blazer that I parted out. As of this weekend I am going to haul the rest off to the scrap yard. If there is anything on this list speak now or forever hold your peace!

Rear Seat - $100
Vent Windows - $40.00
Door Glass w/regulators - $40.00
Blazer Door Caps - $25.00
High Trans Hump - $40.00
Front Drive Shaft - $60.00
Dana 44 front axle - $200

krue · 11-24-2009, 11:21 AM

I am definitely interested in the tailgate. Can you post some pics of it?

*1sik52* · 11-24-2009, 11:35 AM

The white stuff you see on the tailgate is some kind of adhesive that a PO had glued the original trim pieces back on the tailgate, but i have removed some of it. The tailgate is in really great shape and the rust you see is only very minimal surface rust. There are no dents in this tailgate and no bows.

krue · 11-24-2009, 11:52 AM

Looks good but I better wait to start collecting parts until I am going to use them. Does bill or ed know you are selling it?

*1sik52* · 11-24-2009, 12:02 PM

Quote:

Originally Posted by krue

Looks good but I better wait to start collecting parts until I am going to use them. Does bill or ed know you are selling it?

Not sure

**wancosc356** · 11-24-2009, 12:33 PM

Could I see a few more pics of the tailgate? How much is shipping to 29501?

hoss67 · 11-24-2009, 12:42 PM

Ok stupid question will that tailgate fit a fleetside truck or just a blazer? Very interested in it if it will fit. I can drive down an get it if other member passes on it.

**Palf70Step** · 11-24-2009, 12:50 PM

Greg

I'll take the tailgate if none of the others above are grabbing it from you.

May also grab the high hump too.

When you gonna be home this weekend?

*1sik52* · 11-24-2009, 07:46 PM

Quote:

Originally Posted by wancosc356

Could I see a few more pics of the tailgate? How much is shipping to 29501?

Not really looking to ship it. Sorry bud

Quote:

Originally Posted by hoss67

Ok stupid question will that tailgate fit a fleetside truck or just a blazer? Very interested in it if it will fit. I can drive down an get it if other member passes on it.

It will fit a fleetside or a Blazer, they are the same. Let me know

Quote:

Originally Posted by Palf70Step

Greg

I'll take the tailgate if none of the others above are grabbing it from you.

May also grab the high hump too.

When you gonna be home this weekend?

You are next in line Bill. I will be home all week except Saturday I have to make a run to P'cola Sat morning. Would be back afternoon.

**wancosc356** · 11-24-2009, 08:07 PM

Quote:

Originally Posted by 1sik52

Not really looking to ship it. Sorry bud

Its all good. Thanks anyways.

ccr72 · 11-24-2009, 08:17 PM

Sure would like to have that rear seat! I take it you dont wanna ship?

*1sik52* · 11-24-2009, 08:47 PM

Quote:

Originally Posted by ccr72

Sure would like to have that rear seat! I take it you dont wanna ship?

To big, Sorry

**Palf70Step** · 11-24-2009, 09:30 PM

Greg I'll give you a shout Friday and see where you stand with the parts.

Critter · 11-24-2009, 10:24 PM

What kind of shape are the visors and brackets in? Also, what color?

aggieguy713 · 11-24-2009, 11:21 PM

are the door glass and regulators for both sides

*1sik52* · 11-24-2009, 11:48 PM

Quote:

Originally Posted by Critter

What kind of shape are the visors and brackets in? Also, what color?

They are in good shape, Black in color

Quote:

Originally Posted by aggieguy713

are the door glass and regulators for both sides

Yes

hoss67 · 11-25-2009, 09:24 AM

Hey I will take it. Tell me how to pay you. I can pick it up Friday after Thanksgiving or next weekend.

Critter · 11-25-2009, 09:59 AM

Quote:

Originally Posted by 1sik52

They are in good shape, Black in color

If you can get me some pics of the visors I will probably take them. Thanks!

Critter · 11-25-2009, 03:25 PM

Also do you happen to have the little plastic grommet and screws that go below the vent windows on the doors? Thought it might be worth a try.

*1sik52* · 11-25-2009, 11:44 PM

Quote:

Originally Posted by Critter

Also do you happen to have the little plastic grommet and screws that go below the vent windows on the doors? Thought it might be worth a try.

I will get you those pics tomorrow of the visors.
Also, I had those grommets and screws, but I think they are thrown away. I will check.

K2Orion · 11-26-2009, 01:28 PM

I need some parts from a tilt column. Is it a tilt?

*1sik52* · 11-26-2009, 03:10 PM

Quote:

Originally Posted by K2Orion

I need some parts from a tilt column. Is it a tilt?

I only have the parts that are listed left.

BustedTruck · 12-02-2009, 01:53 PM

Is the high hump still available?

*1sik52* · 12-02-2009, 05:09 PM

Quote:

Originally Posted by BustedTruck

Is the high hump still available?

PALF70step has dibs on the tranny hump

11-24-2009, 11:00 AM	#1
1sik52 Account Suspended Join Date: Oct 2008 Location: Gulfport, Ms Posts: 833	Scrap Yard Bound I have some parts leftover from a 72 Blazer that I parted out. As of this weekend I am going to haul the rest off to the scrap yard. If there is anything on this list speak now or forever hold your peace! Rear Seat - $100 Vent Windows - $40.00 Door Glass w/regulators - $40.00 Blazer Door Caps - $25.00 High Trans Hump - $40.00 Front Drive Shaft - $60.00 Dana 44 front axle - $200 Last edited by 1sik52; 11-29-2009 at 09:20 PM.

11-24-2009, 11:21 AM	#2
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: Scrap Yard Bound I am definitely interested in the tailgate. Can you post some pics of it? __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

11-24-2009, 11:35 AM	#3
1sik52 Account Suspended Join Date: Oct 2008 Location: Gulfport, Ms Posts: 833	Re: Scrap Yard Bound The white stuff you see on the tailgate is some kind of adhesive that a PO had glued the original trim pieces back on the tailgate, but i have removed some of it. The tailgate is in really great shape and the rust you see is only very minimal surface rust. There are no dents in this tailgate and no bows.

11-24-2009, 11:52 AM	#4
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: Scrap Yard Bound Looks good but I better wait to start collecting parts until I am going to use them. Does bill or ed know you are selling it? __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

11-24-2009, 12:33 PM	#6
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: Scrap Yard Bound Could I see a few more pics of the tailgate? How much is shipping to 29501? __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

11-24-2009, 12:42 PM	#7
hoss67 Registered User Join Date: Jun 2009 Location: Harrisville, MS Posts: 267	Re: Scrap Yard Bound Ok stupid question will that tailgate fit a fleetside truck or just a blazer? Very interested in it if it will fit. I can drive down an get it if other member passes on it. Last edited by hoss67; 11-24-2009 at 05:31 PM.

11-24-2009, 12:50 PM	#8
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,251	Re: Scrap Yard Bound Greg I'll take the tailgate if none of the others above are grabbing it from you. May also grab the high hump too. When you gonna be home this weekend? __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! Last edited by Palf70Step; 11-24-2009 at 12:51 PM.

11-24-2009, 08:17 PM	#11
ccr72 Registered User Join Date: Oct 2009 Location: essex mo Posts: 23	Re: Scrap Yard Bound Sure would like to have that rear seat! I take it you dont wanna ship?

11-24-2009, 09:30 PM	#13
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,251	Re: Scrap Yard Bound Greg I'll give you a shout Friday and see where you stand with the parts. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

11-24-2009, 10:24 PM	#14
Critter Future TOTM Winner Join Date: Aug 2006 Location: Bulverde, TX Posts: 2,692	Re: Scrap Yard Bound What kind of shape are the visors and brackets in? Also, what color? __________________ 72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces) 72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts 2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver Check it out www.lsdyno.com

11-24-2009, 11:21 PM	#15
aggieguy713 Registered User Join Date: Sep 2009 Location: ringgold, ga Posts: 164	Re: Scrap Yard Bound are the door glass and regulators for both sides __________________ 70 Chevy C10, LT1, T5, "Blue Beast"

11-25-2009, 09:24 AM	#17
hoss67 Registered User Join Date: Jun 2009 Location: Harrisville, MS Posts: 267	Re: Scrap Yard Bound Hey I will take it. Tell me how to pay you. I can pick it up Friday after Thanksgiving or next weekend.

11-25-2009, 03:25 PM	#19
Critter Future TOTM Winner Join Date: Aug 2006 Location: Bulverde, TX Posts: 2,692	Re: Scrap Yard Bound Also do you happen to have the little plastic grommet and screws that go below the vent windows on the doors? Thought it might be worth a try. __________________ 72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces) 72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts 2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver Check it out www.lsdyno.com

11-26-2009, 01:28 PM	#21
K2Orion Registered User Join Date: Jan 2009 Location: St. Louis, MO Posts: 75	Re: Scrap Yard Bound I need some parts from a tilt column. Is it a tilt?

12-02-2009, 01:53 PM	#23
BustedTruck Registered User Join Date: Dec 2006 Location: Braselton, GA Posts: 245	Re: Scrap Yard Bound Is the high hump still available?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.