How low will it go! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

oldno7 · 12-07-2009, 03:50 PM

If you kept the inside of the bed stock, and didn't z the frame. Just a c-notch what type of drop can you get. And would this just be putting in a drop spring

OARNGESI · 12-07-2009, 05:20 PM

Probally 10 or 11 inches a bolt in c notch is 2.5 so just measure from the bottom of your frame to the top of your axle and add 2.5

**lolife99** · 12-07-2009, 06:40 PM

Quote:

Originally Posted by OARNGESI

Probally 10 or 11 inches a bolt in c notch is 2.5 so just measure from the bottom of your frame to the top of your axle and add 2.5

10 or 11 inch drop???

Maybe a 6" drop spring and a 2" block. That would be the max.

Mondo · 12-08-2009, 02:42 AM

I got basically a 5/7 drop with drop spindles, springs & 1 inch blocks. This with a C-notch too. Had to buy upper A-Arms for lowered trucks from Brothers (or CCP) to get camber back to spec (they add more castor too). Rides great, haven't bottomed rear (can't carry much weight in bed though).

OARNGESI · 12-08-2009, 05:04 AM

Quote:

Originally Posted by lolife99

10 or 11 inch drop???

Maybe a 6" drop spring and a 2" block. That would be the max.

yeah your probally right and since the origional poster was talking about a z i thought he was refering to airbags compared to just a drop

12-07-2009, 03:50 PM	#1
oldno7 Registered User Join Date: Jan 2007 Location: Ill. Posts: 584	How low will it go! If you kept the inside of the bed stock, and didn't z the frame. Just a c-notch what type of drop can you get. And would this just be putting in a drop spring __________________ Hi everyone, It's nice to know there's other people just as crazy about these old trucks as I am. oldno7

12-07-2009, 05:20 PM	#2
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: How low will it go! Probally 10 or 11 inches a bolt in c notch is 2.5 so just measure from the bottom of your frame to the top of your axle and add 2.5 __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

12-08-2009, 02:42 AM	#4
Mondo Registered User Join Date: Aug 2007 Location: Bakersfield, Ca Posts: 538	Re: How low will it go! I got basically a 5/7 drop with drop spindles, springs & 1 inch blocks. This with a C-notch too. Had to buy upper A-Arms for lowered trucks from Brothers (or CCP) to get camber back to spec (they add more castor too). Rides great, haven't bottomed rear (can't carry much weight in bed though). Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.