Would this wheel tuck? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

The Big Green · 12-07-2009, 04:56 PM

I found a wheel, it's 24x10 with a +12 (5.91bs). I have a '67 swb with a 5lug disc swap. I know the 22x10 with 6.29bs fit the back easy and the front but not sure if the 5.91 will be too much.

**lolife99** · 12-07-2009, 07:56 PM

The 24's will stick out approximately 3/8" (6.290-5.910=.380") more that the 22"s by your backspace numbers.

Got room to come out 3/8"?

The Big Green · 12-07-2009, 08:06 PM

I have pics from a wheel I had put on to see if it fit. The tire hit the little pinch weld on my front fenders. About an inch of my tire was touching my fender. The 3/8 inch will be so close it's hard to tell really without waiting for 3 months for the wheel to be off backorder.

The Big Green · 12-09-2009, 07:08 PM

Well, found a possible tire, 275/25/24. It's 2.71 sidewall height, and 29.5dia. If I can do a 24 that's my tire.

smashingchuck · 12-09-2009, 09:40 PM

I don't know of anyone running a tire that big that posts here very often. It's easy enough to measure. Make your wheel/ tire out of plywood, bolt it up, and whip out a tape measure.

The Big Green · 12-09-2009, 09:53 PM

LOL. I think I'll order a wheel in, pay freight on one and see if it fits. If not I'm out a few bucks.

smashingchuck · 12-09-2009, 10:08 PM

Personally I would think it wold be worth your time to mock it up. I know I could have it done in less than an hour, for free. That beats paying for freight any day of the week in my book.

12-07-2009, 04:56 PM	#1
The Big Green Registered User Join Date: Oct 2007 Location: Fort Smith,AR Posts: 1,305	Would this wheel tuck? I found a wheel, it's 24x10 with a +12 (5.91bs). I have a '67 swb with a 5lug disc swap. I know the 22x10 with 6.29bs fit the back easy and the front but not sure if the 5.91 will be too much.

12-07-2009, 07:56 PM	#2
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,691	Re: Would this wheel tuck? The 24's will stick out approximately 3/8" (6.290-5.910=.380") more that the 22"s by your backspace numbers. Got room to come out 3/8"? __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

12-07-2009, 08:06 PM	#3
The Big Green Registered User Join Date: Oct 2007 Location: Fort Smith,AR Posts: 1,305	Re: Would this wheel tuck? I have pics from a wheel I had put on to see if it fit. The tire hit the little pinch weld on my front fenders. About an inch of my tire was touching my fender. The 3/8 inch will be so close it's hard to tell really without waiting for 3 months for the wheel to be off backorder.

12-09-2009, 07:08 PM	#4
The Big Green Registered User Join Date: Oct 2007 Location: Fort Smith,AR Posts: 1,305	Re: Would this wheel tuck? Well, found a possible tire, 275/25/24. It's 2.71 sidewall height, and 29.5dia. If I can do a 24 that's my tire.

12-09-2009, 09:40 PM	#5
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Re: Would this wheel tuck? I don't know of anyone running a tire that big that posts here very often. It's easy enough to measure. Make your wheel/ tire out of plywood, bolt it up, and whip out a tape measure. __________________ 78 Build Thread 4Runner Build

12-09-2009, 09:53 PM	#6
The Big Green Registered User Join Date: Oct 2007 Location: Fort Smith,AR Posts: 1,305	Re: Would this wheel tuck? LOL. I think I'll order a wheel in, pay freight on one and see if it fits. If not I'm out a few bucks.

12-09-2009, 10:08 PM	#7
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Re: Would this wheel tuck? Personally I would think it wold be worth your time to mock it up. I know I could have it done in less than an hour, for free. That beats paying for freight any day of the week in my book. __________________ 78 Build Thread 4Runner Build



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.