Any other projects in your garage?

[66swb327]

Heres two of my newest projects. 67 gtx 440 with a 727. I just bought everything to change it over to a 4 spd. The 61 impala I just got for 100.00 from a recycling center my friend works at!

[Bugeyev8]

Originally Posted by 66swb327

Heres two of my newest projects. 67 gtx 440 with a 727. I just bought everything to change it over to a 4 spd. The 61 impala I just got for 100.00 from a recycling center my friend works at!

sweet Impala...whats the plan for it ??

[lakeroadster]

This is my last project: 27 Model T Ford Roadster Pickup. Did it all myself, except for paint and bodywork. '32 rails bobbed and narrowed, custom rear triangulated 4-bar, rear air bags, front transverse monoleaf, 5.0 HO roller motor, 4-speed tranny, 9 inch rear with 4:11's, bias ply rubber with A/R Salt Flat Special wheels, red-oxide over epoxy primer.

It's a ton of fun and yes it's done... some people get it, some don't. Man, if I had a dime for everybody that says "what color you gonna paint it" -or- "nice rat rod".

[MXmaniac]

Originally Posted by lakeroadster

This is my last project: 27 Model T Ford Roadster Pickup. Did it all myself, except for paint and bodywork. '32 rails bobbed and narrowed, custom rear triangulated 4-bar, rear air bags, front transverse monoleaf, 5.0 HO roller motor, 4-speed tranny, 9 inch rear with 4:11's, bias ply rubber with A/R Salt Flat Special wheels, red-oxide over epoxy primer.

It's a ton of fun and yes it's done... some people get it, some don't. Man, if I had a dime for everybody that says "what color you gonna paint it" -or- "nice rat rod".

That's an awesome hot rod.

[Bugeyev8]

Originally Posted by lakeroadster

This is my last project: 27 Model T Ford Roadster Pickup. Did it all myself, except for paint and bodywork. '32 rails bobbed and narrowed, custom rear triangulated 4-bar, rear air bags, front transverse monoleaf, 5.0 HO roller motor, 4-speed tranny, 9 inch rear with 4:11's, bias ply rubber with A/R Salt Flat Special wheels, red-oxide over epoxy primer.

It's a ton of fun and yes it's done... some people get it, some don't. Man, if I had a dime for everybody that says "what color you gonna paint it" -or- "nice rat rod".

I get it...looks done to me, nice to see a Ford in a Ford for a change

[jitteryguy]

I have more than I can aford , here is some of em ,,,,

'84 MonteCarlo, my Girlfriend's race car: 9inch ford , 4:30 gear , soon to have a fresh 383.



my '88 S10 after one of my boy's wreck'd it , 305/700R4 now sport'n a Bravada clip .





'78 Malibu wagon for my 16yr old , sweet 350/350 3500 stall, way more cam that a street car need's, headers and FlowMaster's . not practical but the badest'd sound'n car at his high school !

[66swb327]

Im not sure yet. It needs floors and trunk pan so I would like to find a better body.

[1Bad62Pro/Street]

1969 AMC Rambler American Nostalgia Pro/Street
The curb finders were just for laughs. They are off now.
I did have them on my truck once!

1969 AMC RAMBLER AMERICAN
• Nostalgia Pro/Streeted.
• Hand built from the Ground Up
• Engine Chevy 350ci Destroked to a 327ci
• Made a 4 bolt main 327
• 1971 3970010 4 Bolt Main 350ci 4.020 Bore
• 1968 large journal 327 crank. 5.7 Rods
• Keith Black Pistons to make a bad 327 4 bolt main.
• 1969 441 heads massaged for a crane cam. 292 .501 lift
bump stick.
• Holley 750 cfm 4-bbl Carburetor
• Holley Street Dominator Intake Manifold
• Pertronix Flame-Thrower HEI Distributor
• Accel Heavy Duty yellow Spark Plug Wires
• HP & Torque unknown at this time
• Transmission TH350 with Shift Kit – Built for Street Cruising
• Dual transmission coolers
• 3,000 stall converter
• TCI Cast Aluminum Deep Transmission Pan
• B&M QuickSilver Automatic Ratchet Shifter
• Mustang II IFS (Manual Rack Steering)
• Heidts Superirde Front Coil-Over Shocks for Mustang II Suspension
• Front Stub was Hand Fabricated
• Narrowed Ford 9” Rear End
• 4.56 Gear Ratio
• Detroit Locker
• Leaf Springs on Gas Shocks
• 28 Spline Strange Axels
• Hand Fabricated Suspension
• Rear 1 ½” x 4” Square Tubing 304 Stainless Steel Tubs & Panels
• Wheelbase extended 21/2”
• Exhaust Customized and Hand Fabricated with Exhaust Cut outs
• Home Made Mufflers
• Front Tires: Kumho Tires - Power Star 758 165/80R15 87T
• Rear Tires: Mickey Thompson Sportsman Pro Tire, 29x15.50-12LT
• Front Wheels: Weld Racing Draglite 90-Series Wheel 15 x 4
• Rear Wheels: Weld Racing Draglite 90-Series Wheel 15 x 12
• Custom Interior with a 6 Point Roll Cage
• 15-Gallon Aluminum Fuel Cell
• 1997 Dodge Viper Blue - Professional Paint Job with Old School
Phat Candy Flames

======================================================
Beep beep beep beep
His horn went beep beep beep
While riding in my Cadillac
What to my surprise
A little Nash Rambler was following me
About one third my size
The guy musta wanted to pass me up
As he kept on tooting his horn
I'll show him that a Cadillac is not a car to scorn
Beep beep beep beep
His horn went beep beep beep


I pushed my foot down to the floor
To give the guy the shake
But the little Nash Rambler stayed right behind
He still had on his brake
He musta thought his car had more guts
As he kept on tooting his horn (beep beep)
I'll show him that a Cadillac is not a car to scorn
Beep beep beep beep
His horn went beep beep beep


My car went into passing gear
And we took off with gust (whoosh)
Soon we were going ninety
Musta left him in the dust
When I peeked in the mirror of my car
I couldn't believe my eyes
The little Nash Rambler was right behind
You'd think that guy could fly
Beep beep beep beep
His horn went beep beep beep


Now we were doing a hundred and ten
This certainly was a race
For a Rambler to pass a Caddy
Would be a big disgrace
The guy musta wanted to pass me up
As he kept on tooting his horn (beep beep)
I'll show him that a Cadillac is not a car to scorn
Beep beep beep beep
His horn went beep beep beep


Now we're going a hundred twenty
As fast as I can go
The Rambler pulled along side of me
As if we were going slow
The fella rolled down his window
And yelled for me to hear
"Hey buddy how do I get this car outa second gear?"

Video is when we had the STROKER in her.

YouTube - 1969 AMC RAMBLER AMERICAN...

[HillfromTn]

Street legal 1980 Camaro, 468 , glide, 9" ford w/5:38, 5.29 1/8th...



[ATTACH]725748[/ATTACH

[66ZZ4]

I bought this 56 from a girl at work a couple of years ago. It was her fathers car. It was restored 20 years ago. All original with a 265. Part of me say's leave it stock and part of me say's put a big block in it and hot rod it.

[chevyrestoguy]

Here's my other project:








'55 Chevy stepside, Camaro clip, full air ride suspension, custom cantilever rear, 16x12 ET Fueler wheels. Next step: buy the front wheels, start on plumbing, keep doing fab work. For more info and pics, see the link below.