AZ AZ parts for sale/Trade

[Hotrodhenryj]

Originally Posted by sharpie1972

I'll take the BB stands if they are not spoken for. Thanks, Sharpie

I can ship today 85 shipped, paypal hotrodhenryj@yahoo.com

[rockc]

On the cut out fender is it in good condition and do you have the spare tire holder that fits it?

[Hotrodhenryj]

Originally Posted by rockc

On the cut out fender is it in good condition and do you have the spare tire holder that fits it?

The fender is very clean, no rust, but the lower rear lip has been rolled up. I could straighten it, but don't know your expertise. I sold the tire holder, but there is one on here for sale. If you want me to post a pic let me know. Chuck

[rockc]

Thanks for the reply but I will pass.

[Livrat]

In post #4.. third picture down I see what appears to be a white 4 spoke comfort grip steering wheel hanging from the rafters.. if so.. is it for sale?
$$? including shipping to 98168..

Also do you have any Big block oval port dual plane aluminum intakes? (edlebrock, weiand etc)

Thanks!!

[Hotrodhenryj]

Originally Posted by Livrat

In post #4.. third picture down I see what appears to be a white 4 spoke comfort grip steering wheel hanging from the rafters.. if so.. is it for sale?
$$? including shipping to 98168..

Also do you have any Big block oval port dual plane aluminum intakes? (edlebrock, weiand etc)

Thanks!!

Steering wheel is a LaCarra off my boat, one BB oval but it is a single plane Edelbrock, 100 shipped

[utvaquero59]

Originally Posted by Hotrodhenryj

No plans to go to Vegas, but if you make the trip here will give you one for free! You might go home with some other stuff as well. Thanks Chuck

If you're not in a hurry with the radiator, I may take you up on that. My grandparents live there but I have to check with the boss before a road trip. It's a 6 hour drive. I'll let you know.

[sharpie1972]

Paypal sent for BB stands. Thanks, Sharpie

[mup123]

Originally Posted by Hotrodhenryj

I have pretty much got out of the truck thing but I do have lots of stuff here that needs to go. All parts plus shipping. I do have some great deals and some free stuff for locals.Thanks Chuck

67-8 front grill assembly, nice no rust 125
67-8 rust free radiator support 80.
67-8 aftermarket left front fender 75
69-72 rust free radiator support 60
front bed panel wood bed nice no rust 40
Drivers side step fender with spare cut out rust free, rolled bottom lip 50
Complete front crossmember with disc and PS 50
71 BB motor stands 75
Rodchester carbs 35 ea
6 hole 15X10 whit spoke Blazer wheels need blasted and painted 50
Edelbrock intakes big and small, Holley carbs...Lots will price on request

FREE PARTS
Two front fenders needing work
Two rear window glass with trim
Pair of door glass
Cowl panels
Air cleaners

Any locals can dig through my storage shed, has lots of small stuff, some free some not.

I also have a couple of 5HP dual pump air compressers as well as some electric 1.5HP replacement compressor motors, lots of hand tools, big battery charger and power washer. I will sell this stuff to locals, or trade for something I can use.......

How much to ship the 67-8 radiator support via Fedex ground to 27028

[mup123]

Originally Posted by Hotrodhenryj

I have pretty much got out of the truck thing but I do have lots of stuff here that needs to go. All parts plus shipping. I do have some great deals and some free stuff for locals.Thanks Chuck

67-8 front grill assembly, nice no rust 125
67-8 rust free radiator support 80.
67-8 aftermarket left front fender 75
69-72 rust free radiator support 60
front bed panel wood bed nice no rust 40
Drivers side step fender with spare cut out rust free, rolled bottom lip 50
Complete front crossmember with disc and PS 50
71 BB motor stands 75
Rodchester carbs 35 ea
6 hole 15X10 whit spoke Blazer wheels need blasted and painted 50
Edelbrock intakes big and small, Holley carbs...Lots will price on request

FREE PARTS
Two front fenders needing work
Two rear window glass with trim
Pair of door glass
Cowl panels
Air cleaners

Any locals can dig through my storage shed, has lots of small stuff, some free some not.

I also have a couple of 5HP dual pump air compressers as well as some electric 1.5HP replacement compressor motors, lots of hand tools, big battery charger and power washer. I will sell this stuff to locals, or trade for something I can use.......

Is the front bed panel from a stepside wood box? If so how much to ship via Fedex ground to 27028.

[mup123]

Do you still have a 67-8 radiator support in good shape? If so how much to ship Fedex ground to 27028

[Livrat]

Originally Posted by Hotrodhenryj

Steering wheel is a LaCarra off my boat, one BB oval but it is a single plane Edelbrock, 100 shipped

Chuck, thank you for the reply..
good price!! but will have to pass on your BB single plane.. need a dual plane for the way the engine is set up..
Mark

[Hotrodhenryj]

Originally Posted by mup123

How much to ship the 67-8 radiator support via Fedex ground to 27028

Mocksville, NC 27028 55 bucks oversized 2 they double the weight to figure shipping charges


Bed panel is from a fleet side

[Hotrodhenryj]

Originally Posted by Livrat

Chuck, thank you for the reply..
good price!! but will have to pass on your BB single plane.. need a dual plane for the way the engine is set up..
Mark

Mark, No problem, I have a dual plane but is for a square port.

[Hotrodhenryj]

Originally Posted by sharpie1972

Paypal sent for BB stands. Thanks, Sharpie

Will send first thing Friday AM, thanks for your payment. I will send tracking number to email used at PP...

[short-t]

Looking for a 67/68 radiator support, do you still have yours for sale? If so how much shipped to 59484? Thanks, Greg

[leddzepp]

Do you have any pics of the front bed panel? I will be in Havasu visiting my folks the week after Christmas and can pick up.

[Tod Maznec]

Henry-
Can you ship the stepside driver side fender to the eastcoast? I hear greyhound is cheap to ship somehow. 50 for the fender and another 50 to ship it to zip 03820 in NH. I can post funds to paypal instantly when reply.
Thanxs- Tod

[49mercpapo]

Do you have an intake manifold for a Holley? How much and shipping to 90631?
Thanks,
Steven

[Tod Maznec]

Please reply with estimate on sipping fender to east coast zip 03820. Send it any method- uninsured is ok. -------------------------------Driver side step fender with spare cut out rust free, rolled bottom lip 50____

[Hotrodhenryj]

Originally Posted by short-t

Looking for a 67/68 radiator support, do you still have yours for sale? If so how much shipped to 59484? Thanks, Greg

Greg, I still have the support, its the one shown in the pics, has some extra holes by the headlights, 35 to ship. Look at the pics and if you need more clarification let me know. Thanks, Chuck

[Hotrodhenryj]

Originally Posted by leddzepp

Do you have any pics of the front bed panel? I will be in Havasu visiting my folks the week after Christmas and can pick up.

Yes I have some pics, can send to your email. If you come here you can take some of the other free stuff if you like..

[Hotrodhenryj]

Originally Posted by Tod Maznec

Henry-
Can you ship the stepside driver side fender to the eastcoast? I hear greyhound is cheap to ship somehow. 50 for the fender and another 50 to ship it to zip 03820 in NH. I can post funds to paypal instantly when reply.
Thanxs- Tod

Tod, Fender is to large for Fedex, I don't use Greyhound as it is a 120 mile round trip to the nearest terminal.

[Hotrodhenryj]

Originally Posted by 49mercpapo

Do you have an intake manifold for a Holley? How much and shipping to 90631?
Thanks,
Steven

Steven, I have several Edelbrock Performers, and Streetmaster intakes, 100 shipped..These are for SB, if you need BB, I have some of those also

[Tod Maznec]

How about a piece of a damaged rear stepside driver side fender. Cut the top off the fender where it bolts to the side of the bed. Say the first 6" from the bedside to the wheel opening across most of the fender.



Smaller and easier to ship.