removing armrest and such - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dinnut · 04-22-2003, 09:15 PM

how do you get the window crank and door opener levers off? please help!

Dads72 · 04-22-2003, 09:20 PM

The best answer I can come up with is to go to any auto store and ask them the same question. They sell a tool (which I can't describe) for about $5 that will get those handles off of there. Might be in the "help" section.
When you go to put them back on, install the clips first. Put the handles on the shafts and smack 'em.

dion · 04-22-2003, 09:23 PM

There's a metal clip that holds them on, you can buy a tool at pretty much any parts store for around $5 to remove and replace the clip. You slide the tool inbetween the door panel and handle and it pushes it out, it's really easy. You might be able to use a butter knife or screwdriver too.

dion · 04-22-2003, 09:24 PM

Dads beat me to it.

Dads72 · 04-22-2003, 09:56 PM

That's a first for me, Dion.
But I humbly bow to anyone who has access to a butter knife.

Longhorn Man · 04-22-2003, 10:19 PM

I do it with a shop rag.
If you pull on the handle and look back in there, you will see the clip they were refering to. (you may have to rotate the handle to see the opening on the clip) All it is is a C clip with the ends flaired.
i just slip a shop rag back there and work it back and forth while pulling the clip openings twards the non-opening side. (if that makes sence)
Either way, be prepaired to search for that stupid clip...they always shoot across the shop regardless of how you pull them.

Dads72 · 04-23-2003, 08:18 PM

In the "Help" section at Car Quest -
Part #76951
$5.25

04-22-2003, 09:15 PM	#1
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	removing armrest and such how do you get the window crank and door opener levers off? please help! Attached Images

04-22-2003, 09:23 PM	#3
dion 72 Cheyenne Join Date: Oct 2001 Location: San Diego Posts: 2,086	There's a metal clip that holds them on, you can buy a tool at pretty much any parts store for around $5 to remove and replace the clip. You slide the tool inbetween the door panel and handle and it pushes it out, it's really easy. You might be able to use a butter knife or screwdriver too. __________________ Burnout Idle 1972Cheyenne 1966/67Stouts

04-22-2003, 09:24 PM	#4
dion 72 Cheyenne Join Date: Oct 2001 Location: San Diego Posts: 2,086	Dads beat me to it. __________________ Burnout Idle 1972Cheyenne 1966/67Stouts

04-22-2003, 09:20 PM	#2
Dads72 Registered User Join Date: Nov 2002 Posts: 427	The best answer I can come up with is to go to any auto store and ask them the same question. They sell a tool (which I can't describe) for about $5 that will get those handles off of there. Might be in the "help" section. When you go to put them back on, install the clips first. Put the handles on the shafts and smack 'em.

04-22-2003, 09:56 PM	#5
Dads72 Registered User Join Date: Nov 2002 Posts: 427	That's a first for me, Dion. But I humbly bow to anyone who has access to a butter knife.

04-22-2003, 10:19 PM	#6
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	I do it with a shop rag. If you pull on the handle and look back in there, you will see the clip they were refering to. (you may have to rotate the handle to see the opening on the clip) All it is is a C clip with the ends flaired. i just slip a shop rag back there and work it back and forth while pulling the clip openings twards the non-opening side. (if that makes sence) Either way, be prepaired to search for that stupid clip...they always shoot across the shop regardless of how you pull them.

04-23-2003, 08:18 PM	#7
Dads72 Registered User Join Date: Nov 2002 Posts: 427	In the "Help" section at Car Quest - Part #76951 $5.25



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.