Where did you install your vacuum canister? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Baged72 · 12-22-2009, 07:47 PM

I had to buy a Comp Cams vacuum canister for my 72, where did you guys mount yours under the hood? they are fairly large... pictures much appreciated, thanks!

**wancosc356** · 12-22-2009, 09:06 PM

I believe the original ones were mounted between the radiator support and the passenger side fender. Kinda down in the cup area. Not sure if that helps. Good luck.

Baged72 · 12-22-2009, 09:41 PM

Hmm passenger side fender? seems like a long way to run vacuum hoses to the brake booster, maybe i can mount it where the horn is at on the driver side radiator support.

**wancosc356** · 12-22-2009, 10:10 PM

Yeah. I just know that I pulled one from a 72 GMC front clip the other day. The bracket that holds the canister was bolted in with the radiator support to fender triangular bracket. Just my .02

**72 Super** · 12-22-2009, 10:17 PM

I mounted mine on the core support(driver's side) down close to the voltage regulator. I ran the hoses up between the fender and inner fenderwell.

Baged72 · 12-22-2009, 11:30 PM

Yeah thats what i think i might do, right above the regulator is some old horn, think i will rip that off and put it there.

12-22-2009, 07:47 PM	#1
Baged72 Registered User Join Date: Mar 2009 Location: Sac Town, CA Posts: 146	Where did you install your vacuum canister? I had to buy a Comp Cams vacuum canister for my 72, where did you guys mount yours under the hood? they are fairly large... pictures much appreciated, thanks!

12-22-2009, 09:06 PM	#2
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: Where did you install your vacuum canister? I believe the original ones were mounted between the radiator support and the passenger side fender. Kinda down in the cup area. Not sure if that helps. Good luck. __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

12-22-2009, 09:41 PM	#3
Baged72 Registered User Join Date: Mar 2009 Location: Sac Town, CA Posts: 146	Re: Where did you install your vacuum canister? Hmm passenger side fender? seems like a long way to run vacuum hoses to the brake booster, maybe i can mount it where the horn is at on the driver side radiator support. Last edited by Baged72; 12-22-2009 at 09:45 PM.

12-22-2009, 10:10 PM	#4
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: Where did you install your vacuum canister? Yeah. I just know that I pulled one from a 72 GMC front clip the other day. The bracket that holds the canister was bolted in with the radiator support to fender triangular bracket. Just my .02 __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

12-22-2009, 10:17 PM	#5
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,682	Re: Where did you install your vacuum canister? I mounted mine on the core support(driver's side) down close to the voltage regulator. I ran the hoses up between the fender and inner fenderwell. __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

12-22-2009, 11:30 PM	#6
Baged72 Registered User Join Date: Mar 2009 Location: Sac Town, CA Posts: 146	Re: Where did you install your vacuum canister? Yeah thats what i think i might do, right above the regulator is some old horn, think i will rip that off and put it there.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.