Track bar stud?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

white 67 · 12-22-2009, 08:59 PM

My ece super track bar will be here soon and im trying to get the stud out of the rear end. Is there any trick to getting this out. I took the nut off and its not real happy about coming out.
thanks

mikeoj · 12-22-2009, 09:17 PM

Put some penetrating on it.Put the nut on about 4 threads.Hit with a BFH.

tcb-1 · 12-22-2009, 09:23 PM

^^what Mike said. there is a taper fit that gets sticky over time.

**LockDoc** · 12-22-2009, 09:43 PM

-
If you tap on the casting that the stud goes through with a hammer it will fall out. Just work your way back and forth around the casting. You don't need to beat it to death...

LockDoc

white 67 · 12-22-2009, 10:36 PM

cool thanks for the help.

rick0312 · 12-23-2009, 02:02 AM

be carefull not to break the casting!

12-22-2009, 08:59 PM	#1
white 67 Registered User Join Date: Oct 2009 Location: coupeville ,washington Posts: 348	Track bar stud?? My ece super track bar will be here soon and im trying to get the stud out of the rear end. Is there any trick to getting this out. I took the nut off and its not real happy about coming out. thanks Attached Images Last edited by white 67; 12-22-2009 at 09:10 PM.

12-22-2009, 09:17 PM	#2
mikeoj Senior Member Join Date: Nov 2000 Location: WI,USA Posts: 495	Re: Track bar stud?? Put some penetrating on it.Put the nut on about 4 threads.Hit with a BFH. __________________ 69 Lwb C-10 402/700R4 70 Lwb C-10 250/3pd Wisc.

12-22-2009, 09:23 PM	#3
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	Re: Track bar stud?? ^^what Mike said. there is a taper fit that gets sticky over time. __________________ Doug THANK YOU to our American Soldiers & Veterans - POW MIA "You will NEVER be forgotten". The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson

12-22-2009, 09:43 PM	#4
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,772	Re: Track bar stud?? - If you tap on the casting that the stud goes through with a hammer it will fall out. Just work your way back and forth around the casting. You don't need to beat it to death... LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; 12-22-2009 at 09:44 PM.

12-22-2009, 10:36 PM	#5
white 67 Registered User Join Date: Oct 2009 Location: coupeville ,washington Posts: 348	Re: Track bar stud?? cool thanks for the help.

12-23-2009, 02:02 AM	#6
rick0312 Registered User Join Date: Jan 2006 Location: Warrington, PA Posts: 403	Re: Track bar stud?? be carefull not to break the casting! __________________ 69 C10 LWB GM 350 crate motor, 3.73 rearend Last edited by rick0312; 12-23-2009 at 02:04 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.