Canada WTB - Manual pedal setup and linkages - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tjsblazer · 12-31-2009, 01:03 AM

I am looking for a complete manual pedal setup including brake and clutch pedal, all linkages, rods, springs and Zbar. Application is for a 72 K5 Blazer. Minor surface rust is not an issue but really looking for something in good shape.

**wancosc356** · 12-31-2009, 01:13 AM

Gas pedal or brake pedal setup?

tjsblazer · 12-31-2009, 01:18 AM

Brake and Clutch pedal setup. I am doing an Auto to Manual transmission swap. I assume the accelerator is the same in both setups.
Thanks, Jeff.

Quote:

Originally Posted by wancosc356

Gas pedal or brake pedal setup?

**wancosc356** · 12-31-2009, 01:20 AM

Oh ok. I believe the accelerator pedals are the same. I don't have a brake/clutch pedal setup though. Im sure there are quite a few out there. Good luck.

Jim_PA · 12-31-2009, 09:19 AM

The bracketry on the firewall shouldn't need to be changed, just so you know -

Accelerator is separate from the whole brake/clutch pedal system, so no worries there.

Duncan and son · 12-31-2009, 10:41 AM

Would a 72 cheyenne super with manual trans 2 wheel drive set up come close to working (except for trans linkage)? If so we have a complete set up that is very nice that is in a low milage truck that was wrecked.
Hope that helps Paul

tjsblazer · 12-31-2009, 08:36 PM

Quote:

Originally Posted by Duncan and son

Would a 72 cheyenne super with manual trans 2 wheel drive set up come close to working (except for trans linkage)? If so we have a complete set up that is very nice that is in a low milage truck that was wrecked.
Hope that helps Paul

I am going to look in to it as I'm not sure. I think some parts will but the clutch rods will be different. I'll get back to you when I know for sure. Any one elso know for sure.
How much would you want for the parts? or PM me. Thanks.

49m · 01-01-2010, 02:41 AM

I have a set up i will sell you for $30 plus shiping

tjsblazer · 01-01-2010, 11:09 AM

Quote:

Originally Posted by 49m

I have a set up i will sell you for $30 plus shiping

What vehicle did it come out of? Is it complete, both inside cab and under hood? Would you have any pics?
Thanks, jeff.

classicchev · 01-01-2010, 01:20 PM

where are you in the great white north? I have a couple setups out of 68 trucks in storage.

plcamp · 01-01-2010, 01:38 PM

I have a setup still in my 72 jimmy 4x4 465 Im converting to an automatic setup soon so if they would be interchangeable Ill even trade if you will pay shipping to 32409

tjsblazer · 01-01-2010, 01:47 PM

Quote:

Originally Posted by classicchev

where are you in the great white north? I have a couple setups out of 68 trucks in storage.

Waterloo, Ontario. Do you have the complete setup, (pedal to clutch fork for 4wd)?

tjsblazer · 01-01-2010, 01:49 PM

Quote:

Originally Posted by plcamp

I have a setup still in my 72 jimmy 4x4 465 Im converting to an automatic setup soon so if they would be interchangeable Ill even trade if you will pay shipping to 32409

I am doing an auto to manual swap in a couple of months on my '72 K5 Blazer. Maybe we should talk. I'll send you a PM.

**wancosc356** · 01-01-2010, 02:46 PM

Duh! I do have a setup. Here is the link to it. It is the brake/clutch pedal assembly. And a used master cylinder. Make me an offer on it if you are interested.
http://67-72chevytrucks.com/vboard/s...=1#post3704029

49m · 01-02-2010, 12:02 AM

its out of a 72 k10. I have just the pedals and brackets for inside cab

tjsblazer · 01-02-2010, 01:25 AM

Quote:

Originally Posted by 49m

its out of a 72 k10. I have just the pedals and brackets for inside cab

Thanks, I think for now I am going to hold out to try and find a complete, correct set up.

classicchev · 01-02-2010, 10:51 AM

no, its 2wd. PM Teeitup, he is closer.

1971gmcshortbed · 01-02-2010, 10:53 AM

Are the brake pedals different from auto to manual?

12-31-2009, 01:03 AM	#1
tjsblazer Registered User Join Date: Oct 2009 Location: Great White North Posts: 1,520	WTB - Manual pedal setup and linkages I am looking for a complete manual pedal setup including brake and clutch pedal, all linkages, rods, springs and Zbar. Application is for a 72 K5 Blazer. Minor surface rust is not an issue but really looking for something in good shape. __________________ Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336 Last edited by tjsblazer; 12-31-2009 at 09:23 AM.

12-31-2009, 01:13 AM	#2
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: WTB - Manual pedal setup and linkages Gas pedal or brake pedal setup? __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

12-31-2009, 01:20 AM	#4
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: WTB - Manual pedal setup and linkages Oh ok. I believe the accelerator pedals are the same. I don't have a brake/clutch pedal setup though. Im sure there are quite a few out there. Good luck. __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

12-31-2009, 09:19 AM	#5
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Re: WTB - Manual pedal setup and linkages The bracketry on the firewall shouldn't need to be changed, just so you know - Accelerator is separate from the whole brake/clutch pedal system, so no worries there. Last edited by Jim_PA; 12-31-2009 at 09:19 AM.

12-31-2009, 10:41 AM	#6
Duncan and son Registered User Join Date: Sep 2009 Location: Lubbock Texas Posts: 1,049	Re: WTB - Manual pedal setup and linkages Would a 72 cheyenne super with manual trans 2 wheel drive set up come close to working (except for trans linkage)? If so we have a complete set up that is very nice that is in a low milage truck that was wrecked. Hope that helps Paul __________________ You can shear a sheep every year, but you can only skin it once The person dealing with facts is never at the mercy of the person dealing with theory 1972 Cheyenne Super 402 400 A/c bucket seat tilt custom camper Longhorn 1975 Silverado 454 Crew cab camper special dually

01-01-2010, 02:41 AM	#8
49m Registered User Join Date: Aug 2007 Location: Turners Station,Ky Posts: 842	Re: WTB - Manual pedal setup and linkages I have a set up i will sell you for $30 plus shiping __________________ My Rides 1969 Mustang gt coupe 1971 Chevy Cheyenne 1986 Iroc camaro 1986 K10 Short Bed 1987 Iroc Camaro 1990 rs Camaro 1992 350 ss truck 1998 Honda Civic 2005 Ram 2500 Cummins My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=279831

01-01-2010, 01:20 PM	#10
classicchev Senior Member Join Date: Nov 2003 Location: Calgary Alberta Posts: 1,936	Re: WTB - Manual pedal setup and linkages where are you in the great white north? I have a couple setups out of 68 trucks in storage. __________________ 67- 72 Parts collecter

01-01-2010, 01:38 PM	#11
plcamp Registered User Join Date: Jan 2009 Location: Houma, LA Posts: 43	Re: WTB - Manual pedal setup and linkages I have a setup still in my 72 jimmy 4x4 465 Im converting to an automatic setup soon so if they would be interchangeable Ill even trade if you will pay shipping to 32409

01-01-2010, 02:46 PM	#14
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: WTB - Manual pedal setup and linkages Duh! I do have a setup. Here is the link to it. It is the brake/clutch pedal assembly. And a used master cylinder. Make me an offer on it if you are interested. http://67-72chevytrucks.com/vboard/s...=1#post3704029 __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

01-02-2010, 12:02 AM	#15
49m Registered User Join Date: Aug 2007 Location: Turners Station,Ky Posts: 842	Re: WTB - Manual pedal setup and linkages its out of a 72 k10. I have just the pedals and brackets for inside cab __________________ My Rides 1969 Mustang gt coupe 1971 Chevy Cheyenne 1986 Iroc camaro 1986 K10 Short Bed 1987 Iroc Camaro 1990 rs Camaro 1992 350 ss truck 1998 Honda Civic 2005 Ram 2500 Cummins My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=279831

01-02-2010, 10:51 AM	#17
classicchev Senior Member Join Date: Nov 2003 Location: Calgary Alberta Posts: 1,936	Re: WTB - Manual pedal setup and linkages no, its 2wd. PM Teeitup, he is closer. __________________ 67- 72 Parts collecter

01-02-2010, 10:53 AM	#18
1971gmcshortbed Registered User Join Date: Jul 2003 Location: Las Cruces, NM Posts: 284	Re: WTB - Manual pedal setup and linkages Are the brake pedals different from auto to manual?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.