Threaded bushings "are they good" - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TripleZ · 01-04-2010, 10:42 PM

Hi all, I did a search but I did not find what I was looking for. My question to all is are the old style bushings any good, I have had some people tell me they swear by the grease(able) bushings and others that hate them, I do have a donor truck for the entire front suspension, I am curious as to the opinions here.

ZZZ

**lolife99** · 01-05-2010, 08:42 AM

Are you talking about the steel bushings in the 67-72 a-arms compared to the rubber bushings in the 73-87 a-arms?

Spray-Bomb · 01-05-2010, 07:47 PM

^ X2

If you are talking about the control arm bushings, then heres what I have to say on them

The old style (greasable 67-72) I prefer, they dont give when under a load & they are smaller & you can grease them

The later 73-87 style I dont like (although I have plenty of trucks with em) they are bigger & I have never had a set of headers (including $600 hookers) that I didnt have to cut the crap out of the washer to get them to fit, plus they do give a lil under a load
The pros to the later IMO is that, for thos who dont care about handling & like ride smoothness, they are a lil better & you can get urethane bushings for them to stiffen them up some

TripleZ · 01-05-2010, 11:26 PM

I am asking about the 67-72 greaseable type, I am not sure if I want to leave the A arms I have with drop spindles or swap them out with the 77 arms I have with the urethane bushings. Can you rebuild the 67-72 type. Or do you need to. I am going to do the suspension first and I want as much info as I can get before I remove anything. I have done several vehicles in the past but most of them were not as clean as this one and I found out I was in way over my head, thanks to the info I get from this site I am going to do it right ad take my time.
ZZZ

If you are talking about the control arm bushings, then heres what I have to say on them

The old style (greasable 67-72) I prefer, they dont give when under a load & they are smaller & you can grease them

The later 73-87 style I dont like (although I have plenty of trucks with em) they are bigger & I have never had a set of headers (including $600 hookers) that I didnt have to cut the crap out of the washer to get them to fit, plus they do give a lil under a load
The pros to the later IMO is that, for thos who dont care about handling & like ride smoothness, they are a lil better & you can get urethane bushings for them to stiffen them up some[/QUOTE]

TripleZ · 01-05-2010, 11:40 PM

Here is the truck I just picked up for 2800.00 I live in AZ and this truck has been here for the whole time.

01-04-2010, 10:42 PM	#1
TripleZ Registered User Join Date: Feb 2009 Location: Tucson AZ Posts: 27	Threaded bushings "are they good" Hi all, I did a search but I did not find what I was looking for. My question to all is are the old style bushings any good, I have had some people tell me they swear by the grease(able) bushings and others that hate them, I do have a donor truck for the entire front suspension, I am curious as to the opinions here. ZZZ

01-05-2010, 08:42 AM	#2
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,702	Re: Threaded bushings "are they good" Are you talking about the steel bushings in the 67-72 a-arms compared to the rubber bushings in the 73-87 a-arms?

01-05-2010, 07:47 PM	#3
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Threaded bushings "are they good" ^ X2 If you are talking about the control arm bushings, then heres what I have to say on them The old style (greasable 67-72) I prefer, they dont give when under a load & they are smaller & you can grease them The later 73-87 style I dont like (although I have plenty of trucks with em) they are bigger & I have never had a set of headers (including $600 hookers) that I didnt have to cut the crap out of the washer to get them to fit, plus they do give a lil under a load The pros to the later IMO is that, for thos who dont care about handling & like ride smoothness, they are a lil better & you can get urethane bushings for them to stiffen them up some __________________ Just not low enough... ----------------------------- Sinister Killer Last edited by Spray-Bomb; 01-05-2010 at 07:49 PM.

01-05-2010, 11:26 PM	#4
TripleZ Registered User Join Date: Feb 2009 Location: Tucson AZ Posts: 27	Re: Threaded bushings "are they good" I am asking about the 67-72 greaseable type, I am not sure if I want to leave the A arms I have with drop spindles or swap them out with the 77 arms I have with the urethane bushings. Can you rebuild the 67-72 type. Or do you need to. I am going to do the suspension first and I want as much info as I can get before I remove anything. I have done several vehicles in the past but most of them were not as clean as this one and I found out I was in way over my head, thanks to the info I get from this site I am going to do it right ad take my time. ZZZ If you are talking about the control arm bushings, then heres what I have to say on them The old style (greasable 67-72) I prefer, they dont give when under a load & they are smaller & you can grease them The later 73-87 style I dont like (although I have plenty of trucks with em) they are bigger & I have never had a set of headers (including $600 hookers) that I didnt have to cut the crap out of the washer to get them to fit, plus they do give a lil under a load The pros to the later IMO is that, for thos who dont care about handling & like ride smoothness, they are a lil better & you can get urethane bushings for them to stiffen them up some[/QUOTE] Last edited by TripleZ; 01-05-2010 at 11:34 PM.

01-05-2010, 11:40 PM	#5
TripleZ Registered User Join Date: Feb 2009 Location: Tucson AZ Posts: 27	Re: Threaded bushings "are they good" Here is the truck I just picked up for 2800.00 I live in AZ and this truck has been here for the whole time. Attached Images Last edited by TripleZ; 01-05-2010 at 11:41 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.