Please help me ID my frame - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Wilson_ · 12-02-2008, 06:07 PM

I am having some problems IDing my frame.
I have a 67 short bed step side
Disks up front and leafs in the back and it has all the stock rivets on the hangers and 5 lug all the way around.

I was told by a few people that the frame was a 73-87.
so i bought a c-notch kit for a 73-87 and the notch is straight, and my frame is curved.

So could some one ID my frame please?

Thanks In Advance!!!

Pics

Rear

Front Driver

Front Pass

Center

I have pics of the upper front if you guys need them.

Thanks again

Conundrum · 12-02-2008, 06:33 PM

I had a 67 GMC that had factory leafsprings.
As for the 5 lug bolt pattern, my first guess is that it may have been swapped from a 71-72.

Wilson_ · 12-02-2008, 06:44 PM

Thanks,
I am starting to think that its a 67 frame with a newer front end.

Damn once again i bought the wrong stuff

gringoloco · 12-02-2008, 09:31 PM

Definitely a 67-72 frame. Leaves were optional. Pics of the front top side and steering box mounting would help determine if it's a '67.

**FRENCHBLUE72** · 12-02-2008, 09:51 PM

67-72 frame with stepped lower controll arms and spring clamps.

Wilson_ · 12-03-2008, 04:06 AM

Thanks for the replys guys!!
Here is the pic you guys asked for.

So when i buy front end parts, like springs, balljoints ect. what year do i look for?

Thanks again

Wilson_ · 12-03-2008, 04:07 AM

Quote:

Originally Posted by FRENCHBLUE72

67-72 frame with stepped lower controll arms and spring clamps.

Yes the spring clamps are going very very soon

im guessing the springs were heated and it was too low, because the clamps are reversed and are spacing out the spring so it lifts the truck.

I have been fixing crap like this for a while on this thing

**FRENCHBLUE72** · 12-03-2008, 08:27 AM

Im not 100% sure but it looks like you should be able to order 72 front end stuff for it.

Wilson_ · 12-04-2008, 04:03 AM

Thanks for the info guys!!

leftcoast66 · 12-04-2008, 05:25 AM

Quote:

Originally Posted by FRENCHBLUE72

Im not 100% sure but it looks like you should be able to order 72 front end stuff for it.

Yeah, my memory says it was 72 that was the only year for the disc's up front in 5 lug...

Wilson_ · 12-04-2008, 05:50 AM

Quote:

Originally Posted by leftcoast66

Yeah, my memory says it was 72 that was the only year for the disc's up front in 5 lug...

Sweet, Thanks!

Tx Firefighter · 12-04-2008, 07:46 AM

Quote:

Originally Posted by leftcoast66

Yeah, my memory says it was 72 that was the only year for the disc's up front in 5 lug...

71 and 72 were 5 lug.

Your front suspension is definitely pre 73 stuff as it uses steel screw in control arm bushings. In 73 they went to pressed in rubber bushings.

Wilson_ · 01-08-2010, 05:47 PM

so a update...

I figured everything out last year and forgot to update.

67 gmc frame
73-87 front upper arms, spindals and brakes
67-72 modified lowers

thanks for the help

12-02-2008, 06:07 PM	#1
Wilson_ Registered User Join Date: Sep 2008 Location: Santa Rosa, CA Posts: 451	Please help me ID my frame I am having some problems IDing my frame. I have a 67 short bed step side Disks up front and leafs in the back and it has all the stock rivets on the hangers and 5 lug all the way around. I was told by a few people that the frame was a 73-87. so i bought a c-notch kit for a 73-87 and the notch is straight, and my frame is curved. So could some one ID my frame please? Thanks In Advance!!! Pics Rear Front Driver Front Pass Center I have pics of the upper front if you guys need them. Thanks again Last edited by Wilson_; 12-02-2008 at 06:08 PM.

12-02-2008, 06:33 PM	#2
Conundrum Registered User Join Date: Oct 2008 Location: Parsons, KS Posts: 652	Re: Please help me ID my frame I had a 67 GMC that had factory leafsprings. As for the 5 lug bolt pattern, my first guess is that it may have been swapped from a 71-72. __________________ 74 GMC SWB Project "Sin-thia" Static Dropped 8"f/10"r http://67-72chevytrucks.com/vboard/s...d.php?t=460030 97 GMC reg cab short bed, 4.3V6 / 5spd, daily driver 220,000 miles, all stock for now

12-02-2008, 06:44 PM	#3
Wilson_ Registered User Join Date: Sep 2008 Location: Santa Rosa, CA Posts: 451	Re: Please help me ID my frame Thanks, I am starting to think that its a 67 frame with a newer front end. Damn once again i bought the wrong stuff

12-02-2008, 09:31 PM	#4
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: Please help me ID my frame Definitely a 67-72 frame. Leaves were optional. Pics of the front top side and steering box mounting would help determine if it's a '67. __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

12-02-2008, 09:51 PM	#5
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Please help me ID my frame 67-72 frame with stepped lower controll arms and spring clamps. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-03-2008, 04:06 AM	#6
Wilson_ Registered User Join Date: Sep 2008 Location: Santa Rosa, CA Posts: 451	Re: Please help me ID my frame Thanks for the replys guys!! Here is the pic you guys asked for. So when i buy front end parts, like springs, balljoints ect. what year do i look for? Thanks again

12-03-2008, 08:27 AM	#8
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Please help me ID my frame Im not 100% sure but it looks like you should be able to order 72 front end stuff for it. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. Last edited by FRENCHBLUE72; 12-03-2008 at 08:27 AM.

12-04-2008, 04:03 AM	#9
Wilson_ Registered User Join Date: Sep 2008 Location: Santa Rosa, CA Posts: 451	Re: Please help me ID my frame Thanks for the info guys!!

01-08-2010, 05:47 PM	#13
Wilson_ Registered User Join Date: Sep 2008 Location: Santa Rosa, CA Posts: 451	Re: Please help me ID my frame so a update... I figured everything out last year and forgot to update. 67 gmc frame 73-87 front upper arms, spindals and brakes 67-72 modified lowers thanks for the help __________________ Northern California Group Met list: Cyclone, KCJones, TranzAm, extd56, hotrodhomi, mnky30, Rokcrln, Brad, JerryJones, Petey-pablo, 72Subby



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.